How to insulate wooden windows for the winter effective materials

Principles of self-insulation

To self-insulate windows for the winter, you need to create an airtight space between the window frames, because the air in a confined space has excellent thermal insulation qualities.

To ensure a comfortable temperature in the room, you should get rid of cracks and holes that can let in cold air.

To insulate wooden windows, you can use different methods and materials: adhesive tape, fabric, glue, cotton wool and rubber seals. An adsorbent can be additionally placed in the space between the frames.

Sealing wooden windows

Seal cracks in wooden windows

Slots in the window structure, loose fit of the frames to the opening lead to a deterioration in the microclimate of the room. This is especially noticeable in winter - the room becomes cold, damp, a fungus may appear. Sealing wooden windows will help eliminate this problem.

Its implementation includes several stages:

adjustment of window frames;
glass sealing;
sealing the joints of the frame with the window opening.

Sealing wooden window frames with hydrophobic impregnations will stop them from further deformation. The sealing of the joints of the frame with the walls is carried out from the side of the facade of the building. How to seal wooden windows if the apartment is located above the ground floor? There are several ways to seal windows at height: using aerial platforms, scaffolding, mounting cradles, as well as the industrial alpinism method.

Industrial climbers seal wooden windows and other building structures on any floor of a building. This is a reliable and economical way to seal gaps.

Prices for sealing wooden windows

The cost of window sealing depends on the type of work performed, which may include applying sealant, replacing sealing rubber, etc. The master who came to you to eliminate the causes of discomfort will be able to determine the scope of work and their cost.

You can get answers to any questions you may have by phone +7 940-76-95 or by e-mail by sending a request to our address info@alptech.ru

Additional Information

Significant experience in the field of sealing translucent structures in various ways has been gained by Alptechnologii. present in this market segment since 2000.

When arranging a seam between building structures, not only waterproofing materials are used, but also an insulating sealant. This avoids freezing of joints in winter.

Alptechnologii performs all types of high-rise, assembly, electrical, repair and construction works. Our experts will advise you on all issues related to the performance of the service, develop a technical solution, and select the necessary materials.

Why sealing work is ordered from Alptechnology

We use only materials certified in Russia.
We accept step-by-step payment for non-cash and cash payments. We provide significant discounts for large volumes of work.
We provide safe and high-quality order fulfillment.
We carry out work on the territory of Moscow and the Moscow region. Departure of experts to regions is possible.
We have all the documents necessary for the provision of services to industrial climbers. We work with the conclusion of the contract.
We issue a written guarantee for the services performed.

Upon the customer's call, our employee will inspect the object, draw up a project estimate and answer the customer's questions.

or call by phone

Winter is coming, we insulate windows without any extra effort

Before we take drastic action, let's look at the possible causes of drafts coming from windows.It would seem that wooden windows retain more heat due to their material, while plastic windows, a relatively new achievement in science and technology, are simply designed for heat and sound insulation. Then why can they let a draft into our house?

Unfortunately, poor-quality window installation is quite common. Sometimes employees of installation companies, who call themselves professionals, have a very superficial idea of the installation of window blocks.
The second reason may be partly related to the first - an attempt to save on the installation of plastic windows. Companies often reduce the price by saving on insulation, foam, and the installation itself. Subsequently, low-quality windows are much more expensive due to the need to additionally insulate them.
Even if cold air does not seep through the gaps, the windows themselves may be to blame, such as the old "single-layer" windows, which provide only a thin glass barrier between the house and the street, but not cozy warmth.
Skewed windows and loose fitting of the window frame to the wall also threaten heat loss. Sometimes this happens due to the deformation of the building, which is especially common in old wooden houses.

Features of sealing window seams

The need for window insulation is always due to climatic and weather factors, and sometimes - insufficient sound insulation of window structures. People living in an apartment with such windows suffer from drafts, cold and even dampness (since condensation can accumulate on the inner surface of double-glazed windows and mold can form). High-quality sealing of seams provides effective protection of the room from these unpleasant phenomena.

Deficiencies of this kind can be caused by several reasons. Firstly, the problem is caused by incorrect installation of window frames. Not all installers exactly adhere to the technology of working with mounting foam, using this composition without any additional protection. Secondly, the double-glazed windows themselves may not be of the best quality. In addition, the loss of tightness is sometimes a natural process - the "age" wear and tear of natural materials (wood).

In addition to keeping warm and protecting against weather, high-quality sealing of window seams allows you to correctly distribute mechanical loads and provide the necessary resistance to wind.

The main material used to insulate window frames is polyurethane foam. Its functional characteristics are quite enough for high-quality heat and sound insulation of windows. But over time, the sealing composition undergoes partial destruction, as well as changes in volume under the influence of temperature fluctuations. These processes lead to a number of problems, including a violation of the tightness of the window, incorrect operation of the locking mechanisms, and even damage to the plaster layer in close proximity to the structure.

How to insulate wooden windows for the winter with your own hands

People have been using wooden windows for a very long time, so the question “How to insulate old wooden windows?” there are many answers.

A very old method used by our grandparents is to seal wooden windows with newspapers. They were soaked in water and plugged cracks with them. The space between the glass and the frame was sealed with paper strips. Of course, “paper will endure everything,” and it is possible to spend the winter with it, but in the spring it will be very problematic to remove particles of newspapers. In addition to the banal inconvenience, there is also a risk of damaging the window covering.
If old windows need to be insulated quickly, and the aesthetic side of the issue is not very important to you, plain paper will also do. To make paper putty, you can grind up old newspapers, soak them in water, add clay or crushed chalk, and seal the cracks with the mixture.To fix the putty for windows, it is enough to use adhesive tape. However, this method is short-lived and, most likely, will last only one season.
As a heater for wooden windows, you can use foam rubber - ordinary or tubular. It will be effective if the wooden sashes are already dry and do not fit snugly against the frame. Previously, foam rubber was nailed with small carnations, but now you can use ordinary masking tape. This material can serve faithfully for a couple of years, then it will begin to deform and will need to be replaced.
When insulating wooden windows, you can also use a sealant. It is necessary to remove the wooden glazing beads holding the glass with a screwdriver, apply sealant and install the glazing beads back - preferably new ones, since the old ones often break during dismantling.
Wood tends to crack. Therefore, often the frame is covered with a network of small cracks through which heat can escape. To repair them, you will need to clean the glass from the decorative coating, fill the cracks with molten paraffin, home-made putty, sealant or special putty, and then re-coat the frame with paint or varnish.

Paraffin and sealant paint is sometimes problematic, so they need to be applied in a thin layer and remove excess from the surface of the wood.

What will the result of window insulation be? Of course, a comfortable air temperature in cold weather, the absence of drafts and reduced heating costs. However, the desire for complete thermal insulation has its drawbacks. Violation of the natural air circulation can lead to many problems - from condensation on the windows to poor health. Therefore, it is necessary to regularly ventilate the room.

If prolonged ventilation is not possible in a frosty winter, you should pay attention to the breather: it will not only provide a constant supply of fresh air with the windows closed, but also heat it up to the temperature you need

http://moydomik.net/okna/derevo-okna/412-kak-uteplit-derevyannye-okna-na-zimu.html

Glazing of balconies with wooden frames

The Zavidnye Okna company offers wooden-framed glazing services for balconies and loggias of multi-storey buildings. We produce hinged and deaf structures, we carry out the installation of windows with the removal of the parapet. The sashes are made both to the full height of the opening, and with blind glazing for a third of the upper part of the frame.

The cost of glazing balconies and loggias with wooden frames is 2000 rubles per square meter. .

Wooden frames are made from pine timber of our own production, with a section of 40x45 mm. This is an environmentally friendly material that optimally matches the climatic conditions of a sharply continental climate. All beams are strictly selected for their geometry and moisture content, which is 10-12%, and checked for the absence of knots. When glazing balconies, 4 mm thick glass is used; it is possible to install double-glazed windows in euro-windows made of wood.

To extend the maximum service life, the frames are covered with Aquatex water-based acrylic protective compounds. Antiseptics prevent the appearance of blue, rot, protect against wood-destroying insects. As a finishing coating, weather-resistant varnish "ZowoSan" is used, which protects wooden frames from moisture, ultraviolet radiation and favorably emphasizes the texture of pine. There is a choice of about 15 color shades of varnish. In the process of manufacturing window sashes, standard fittings are used, which ensure easy top and side opening.

Glazing with wood will perfectly fit into the interior of any balcony, provides good sound insulation, has a low coefficient of thermal conductivity. The large area of the sashes does not limit the intensity of sunlight entering through the glass. The cost of sq.a meter frame made of wood compares favorably with the price of plastic structures.

Placing an order and the cost of wood glazing

You can order glazing with wooden frames from Enviable Windows by calling 363 59 97 or by filling out the online application form on the website. At the agreed time, a specialist will arrive at the address indicated by you, who will measure the windows of the balcony, offer glazing options, and calculate the cost of the finished product. Having decided on the type of construction, you can conclude an agreement on the spot and make an advance payment. The term for manufacturing an order is no more than four days, delivery and installation of a wooden frame is carried out within 1-2 days by the craftsmen of the Enviable Windows company. All work performed is guaranteed for 1 year.

The following works are additionally paid: installation of a window sill - 300 rubles. for m.p. installation of a visor - 350 rubles. for m.p. outflow from polyesterol or galvanized metal - respectively 350 and 250 rubles. for m.p. The order for the turnkey finishing of a balcony or loggia includes flooring from a grooved board - 1200 rubles. per sq.m. and roof installation - 1200 rubles. per sq.m.

Window sealing

We provide comprehensive services for sealing plastic windows and seams of any complexity, including:

inspection of the object in order to identify places of leaks and drafts;
the establishment of rotten and cracked sealing gum, as well as voids between the frames and the facade;
preparation of work estimates;
trimming and removing old sealing gum;
degreasing work surfaces, as well as glass or plastic;
applying silicone sealant or filling the joint with polyurethane heat-shielding foam;
laying polyurethane foam insulation;
final sealing of plastic windows using moisture-proof mastic.

Sealing wooden windows

Our specialists work with window structures made of any material, including. wooden array. Depending on the location of the object, we use the appropriate special equipment.

Sealing wooden windows allows you to get rid of the disadvantages inherent in this material. Namely, the ability to swell or shrink when the level of humidity changes. The work is carried out in two stages, first, during installation, external and internal seams are sealed, then glass and frames are insulated.

Sealing plastic windows

Today, despite the huge amount of building materials available, after installing PVC double-glazed windows, most companies simply blow out the external seams with polyurethane foam. This method of sealing plastic windows has both advantages and significant disadvantages.

Firstly, the foam does not have waterproofing properties, so PVC windows should be additionally treated with silicone. Secondly, under the influence of climatic factors, the foam darkens and collapses over time. Therefore, after sealing the seams of plastic windows, it is necessary to additionally protect them with a layer of plaster or paint. Such work will be performed efficiently and promptly by Azimut specialists.

Feedback form: