Shower mixers

Installation of outdoor elements

As for fixing the decorative control panel, it is put on a special clothespin. This latch is fixed to the box of the main assembly or the block itself, mounted in the wall. A distinctive clicking sound will indicate that the device is properly secured.

External elements are fixed after finishing the walls

The shower outlet and the gander are screwed onto the adapters installed in the pipes and pressed with masking fasteners, which have a more decorative function. A technological gap should be left between the wall cladding and the faucet, usually about two millimeters.

It is advisable to seal all places where the elements fit with sanitary silicone. Such actions will help to avoid the penetration of moisture into the walls. This advice is especially relevant for plasterboard wall structures.

Built-in faucets are not in vain in recent years in high demand. After all, these systems, despite the high cost, are very functional and convenient. Having carefully studied the types and features of these structures, you can choose the model you need and install it yourself without much effort.

Exterior elements are fixed after finishing the walls After the installation of the system, it is necessary to carry out its test run The absence of unnecessary bulky fasteners frees up the walls of the bathroom Built-in faucets are very elegant Some models include not only a hidden faucet, but also a shower hose Built-in faucets with one lever are suitable for washbasins The internal mechanism is made made of copper or brass Before proceeding with installation, you should read the manufacturer's instructions For the mechanism, make an opening in the wall The best option would be polypropylene pipes Designs with two shower heads are very convenient Often a protective plastic casing comes with the indoor unit Concealed faucets are usually multifunctional and increase aesthetics of the bathroom interior Some models are equipped with a thermostat

Tips for self-assembly of equipment

Installing a built-in shower faucet is a time-consuming process, but not complicated, and if desired, everyone can install all the equipment with their own hands.

First you need to prepare a niche or make small recesses in the wall for laying the pipeline. In most cases, it is enough to make a strobe 12-15 cm wide and 9-11 cm deep. To do this, use a puncher with a concrete drill of the desired diameter.

Then you can start laying the pipeline:

1. Determine the installation location of the shower head (and spout).
2. Using a pencil, draw the shortest line to the recesses in the wall.
3. Punch the wall along the drawn lines with a puncher with a strobe nozzle.
4. From the installation site of the central unit, draw a line to the main water supply.
5. Make recesses from the water pipe to the central block of the faucet.
6. Then lay the pipes in the recesses and connect them.
7. Make outlets for the faucet spout and watering can by installing angled threads at the end of the pipeline, and fix them securely in the wall.

This installation method complies with all pipeline connection standards. Please note that all connections must be securely fixed with tow and paint, and in this case there will be little use from FUM and plumbing tape. After the installation of all hidden communications, all repair and finishing work in the bathroom is completed.

After the wall decoration in the room is completed, you can proceed to the last stage - installing a watering can (and spout) and a plate with handles. The plastic frame is attached to the body of the main unit, and a decorative plate with levers is attached to the frame.The shower head is installed using a special adapter with a fitting on rubber seals. Seals are put on the fitting, and the adapter is fixed with small decorative screws.

As you can see, the installation of built-in shower systems is not difficult. And when sheathing walls with drywall and creating a special box, this process is simplified even more. Watch the video on how to install a hidden shower faucet with your own hands:

Features and Benefits of Concealed Faucet

In interior design, it is very important to correctly hide all unsightly objects that perform exclusively practical functions. Built-in mixer meets these requirements

Hidden plumbing, due to the absence of bulky elements, creates the effect of a visual expansion of space. And the details remaining on the surface look very attractive, stylish and elegant.

Since the device itself is built into the wall, responsible manufacturers care about the quality of materials and the durability of plumbing. Concealed shower faucets are made in various variations and configurations. There are several types of secret shower kits, which we will discuss in more detail. But one thing unites any high-quality set - a long service life (10-15 years), because to replace the hidden parts you will have to disassemble the wall.

At the same time, the built-in faucet with a hygienic shower is very easy to operate, which increases comfort during water procedures. In addition, it is not at all necessary to buy a complete set, if you have some parts, then it is quite possible to purchase the necessary elements intended for this model. A wide range will allow you to choose a control panel and external elements that will suit the style of your bathroom interior.

Some hygienic shower sets with a built-in faucet are equipped with a water supply control and a thermostat. Many models are equipped with a function to prevent splashing of water droplets.

But such designs have some disadvantages. The first drawback is the high cost (180,000-300,000 rubles). Another disadvantage is the need for wall chasing in order to build in a pipeline or the presence of a niche to hide communications. And if you have an acrylic bathtub or shower tray installed, then when carrying out wall chasing work, crumbling walls can damage the coating.

Benefits of wall mounting

The wall-mounted kitchen faucet is especially handy. After all, summing up the kitchen faucet from the wall allows you to hide pipes and communications in it, from which the kitchen decor certainly benefits. And the purpose of the kitchen is not only cooking, it is also a place to eat, and often a place to relax over a cup of tea. Therefore, the possibility of creating a more comfortable environment for the kitchen, which is provided by summing up the kitchen faucet from the wall, plays by no means the last role.

The wall mixer is connected to the water pipes rigidly and very firmly. It does not require hoses and other additional flexible communications that can break. Wall-mounted faucets are very convenient for the kitchen, only their installation requires a little extra effort. After all, to install them, it is necessary to lay pipes, and then close them and bring the room into a beautiful view. You can also mount them not to the wall, but to a special partition, usually made of plastic, which can be installed anywhere.

If, with other mounting methods, a kitchen faucet with a long spout is required, then wall-mounted faucets can be immediately fixed at any height convenient for the owners of the kitchen, depending on individual preferences and features of the kitchen interior.

The most popular model in this product segment is the wall-mounted single-lever model.Thanks to its user-friendly design for ease of use, as well as the long service life inherent in all wall-mounted models, it is the most sought after.

Instructions for installing a concealed faucet

Installing a concealed hygienic system is much more difficult than installing a corresponding structure on a sink. In this situation, you need to either drill a wall or make a special box in which you can place the inside of the product.

Such work involves the sequential implementation of the following steps:

1. Studying the instructions in order to familiarize yourself with the device and its features.
2. Thinking about the installation location of the mixer and its components.
3. Carrying out the wiring of the water supply system.
4. Determining the exit point of the shower hose.
5. Connecting plumbing.
6. Preparing a niche in a wall or box. The manufacture of a niche involves the use of a perforator with a special nozzle installed on it.
7. Laying in the holes of all the necessary elements (pipes and bends).
8. Installation of the mixer in a niche in accordance with the instructions.
9. Carrying out a trial run, namely a careful examination of the system at the time of leaks, the study of every centimeter, especially at the junctions.
10. Wall repair.

Important! When purchasing a flush-mounted faucet, you should pay attention to the mounting box. The presence of this device greatly facilitates repair work.

10 Adorable Celebrity Kids Who Look Very Different Today Time flies and one day little celebrities become unrecognizable adults Pretty boys and girls turn into s.

Top 10 Broken Stars It turns out that sometimes even the loudest glory ends in failure, as is the case with these celebrities.

10 Mysterious Photos That Will Shock Long before the advent of the Internet and the masters of Photoshop, the vast majority of photos taken were genuine. Sometimes the pictures got really unbelievable.

15 Symptoms of Cancer Women Most Often Ignore Many of the signs of cancer are similar to those of other diseases or conditions, so they are often ignored.

Pay attention to your body. If you notice

11 Weird Signs That You're Good in Bed Do you also want to believe that you're giving your romantic partner pleasure in bed? At least you don't want to blush and apologize.

Unforgivable Movie Mistakes You Probably Never Noticed There are probably very few people who don't like watching movies. However, even in the best cinema there are errors that the viewer can notice.

How is the design of the built-in shower faucet

Wall-mounted shower faucets are a one-of-a-kind product that can transform a bathroom. These systems are mainly installed in shower cabins, but in some cases they can be mounted above the bathtub. Most models designed for showers do not have a spout and have one inlet for a shower hose and two outlets for cold and hot water.

As a rule, hidden mixers consist of two main parts - a block that is mounted in a wall or a special box, and a decorative panel with control levers. The watering can is purchased separately for the main module and is selected according to the style of the interior. Round - for a classic interior, square or rectangular - for modern or high-tech style. If desired, you can install a small spout.

The built-in block is responsible for the distribution of water flows, and consists of a cylinder in which there is a brass head with four threaded holes:

• two holes - for connecting pipes with cold and hot water;
• two holes - for supplying mixed (warm) water to a watering can or spout.

The average cost of a complete set without additional functions is 70,000 rubles.

https://youtube.com/watch?v=u3E0LAaecwM

Conclusion

The quality of modern kitchen sink faucets, made by reputable manufacturers, is able to provide the opportunity to use water regardless of any external conditions.

And their sophisticated look and high-tech additions give the kitchen workspace a trendy look. They easily fit into a discreet classic interior, and sophisticated modern, and minimalist hi-tech, and colorful oriental style. With the help of modern models of mixers, it is possible to embody many of the most daring ideas of designers. To do this, you just need not be afraid to experiment and be able to install them correctly and reliably. Sometimes they can themselves be an original design solution that allows you to create an atmosphere in a kitchen in a certain style.

So how do you choose exactly the product that suits you better than others? The best option for kitchen faucets, most consumers consider a single-lever faucet, which allows you to open the water with a slight movement, and if your hands get dirty, then with your elbow.

A lot of fans managed to acquire such a type of kitchen faucets as the so-called thermostatic faucets, which appeared relatively recently. As a new generation of mechanisms, they are comfortable, but at the same time reliable and safe, while featuring a stylish design. Their appearance is a special panel with handles. One is designed to turn on or off the water supply, and the other regulates its temperature. All the settings made are saved and therefore there is no need to select the necessary parameters in the future.

The main difference between the thermostatic faucet and others is the safety stopper, which provides protection against burns, which is especially important if it can be turned on by young children. Such a stopper does not allow heating of water above 38 degrees, and if necessary, this function can be turned off at any time

However, those times when such products were assigned the role of performing purely technical functions are long gone.

Today it is also an element of the kitchen interior, to which interior designers pay great attention, therefore, more and more new models are constantly appearing on the sanitary products market, which are designed for a variety of consumer tastes. Manufacturers are constantly trying to please us with new products that meet the most sophisticated tastes and diverse needs of the population, while allowing us to embody the most daring fantasies of designers.