How to insulate the floor in the bath on screw piles video

The choice of thermal insulation

The device of a bath on wine piles allows the use of virtually any material for thermal insulation. Someone takes expensive products, others use improvised means (for example, plastic bottles). Suitable for heaters stand out:

  • expanded clay - inexpensive, environmentally friendly. Of the shortcomings - poor resistance to temperature extremes and the need to lay a thick even layer (at least 20 cm), which is problematic;
  • polystyrene - ergonomic, inexpensive, reliable. Of the shortcomings - it deteriorates when combined with some paints and varnishes;
  • mineral wool - comfortable to lay, perfectly retains heat. Of the shortcomings - accumulates dirt and dust;
  • ceramic tiles - convenience, durability. Of the shortcomings - the high cost.

Warming process

Screw piles for a bath in the distant past have proven themselves on the good side. They greatly facilitate and speed up the construction process. Warming is carried out immediately after the structure shrinks, which makes this type of foundation so popular.

The process of insulation depends on the coating used for laying the floor. The most commonly used tree. It emits a pleasant smell, environmentally friendly, reliable and looks great. If it is planned to use wood as a floor covering, then thermal insulation will be carried out as follows:

  1. After the installation of the laying pile and the foundation bath, the floor is covered with beams to increase the stability of the final structure.
  2. The cranial bar is placed on top
  3. Subfloor poured
  4. Thermal insulation material is laid
  5. Vapor barrier work in progress
  6. The main floor covering is laid.

If concrete is used for the floor, a cement tile is laid on top of the first layer, a waterproofing material is placed on top, then a heater is poured and concrete is poured.

Choosing a foundation for a bath on screw piles, you will not be disappointed. And we will manufacture and, if necessary, install the structure quickly and reliably. The base for the foundation is made from reliable and reliable materials that can last a couple of decades.

The foundation on screw piles under the bath. Foundation after 4 years. SV-Foundation

Fascinating notes:

  • Independently developed iron furnaces
  • Generators as mini power plants
  • Trunk circle of a fruit tree
  • Bath foundation

Selected by important queries, relevant articles:

  • Have you decided to build a bath? Excellent! This article will tell you in detail about how to quickly and cheaply build a bath. With this in mind, please start reading...

  • How to correctly insulate the roof in order to maintain the maximum amount of heat? In most cases, the space is insulated specifically between the ceiling and the attic, ...

  • Due to the desire of warm air to rise up (a well-known fact from a physics book for school), in our case - to the top of the structure ...

  • Do you need a bath in your summer cottage? There can be no doubt about it: it goes without saying that it is needed! From time to time, just a bathhouse is built, first of all, in order to use it as ...

  • The reader is offered a description of a relatively inexpensive and compact bathhouse built on a typical garden plot. The banya was conceived as a Russian…

  • In the conditions of the domestic climate, the question of how to insulate a house is very relevant - winters can be quite harsh, and spring and autumn can also be low ...

Country ideas and experience of gardeners

Electricity

Plumbing

Heating