How to use the Electrolux column
A permit to operate an Electrolux gas water heater is not required. When drawing up documents for connection, it is enough to provide a column passport or indicate the exact name of the model.
How to turn on the Electrolux column
manual connection is prohibited
According to current regulations, the connection can be made by:
- representatives of the company that sold the water heater;
- gas experts.
There are several basic connection rules:
- installation is carried out in accordance with the rules described in SNiP and SP;
- the first launch is carried out in the presence of the inspector of the Gas Service;
- be sure to withstand gaps between the stove, refrigerator, sink;
- installation is carried out in strict accordance with the gas supply project;
- the room used for the boiler room must meet the minimum requirements: height 2.2 m, area not less than 12 m², the presence of a vent or an opening window.
How to set up an Electrolux column
To change the power, increase or decrease the gas supply, changing the intensity of the flame burning, focusing on the digital indicators displayed on the screen.
In the device of the Electrolux geyser with flame modulation, adjustments are made according to a different principle. The user sets the desired water temperature. The programmer independently changes the power of the burner, adapting to the actual pressure in the water supply system.
It is forbidden to regulate the temperature by mixing cold water with hot water.
How to clean your Electrolux column
-
column heat exchanger Electrolux
- inside the tube they are overgrown with scale, outside the radiator is covered with soot; - burner
- The jets are clogged with soot.
During the repair, the master will remove the casing of the column, disconnect the heat exchanger and remove the burner. The coil is washed using special chemicals, under pressure. The radiator fins are washed with ordinary soapy water. The burner is cleaned with a metal awl. The work is carried out by a qualified specialist with a permit and the appropriate license.
Therm 4000 S WTD 12 1518 AM E2331.
Before starting, you must make sure that, on the plate installed by the manufacturer on the device, the gas marking corresponds to the gas connected to the device. It is possible to connect a remote control to the device, which completely duplicates the operation of the display on the column.
Open the gas cock and water valves. Connect the machine to the mains.
The water temperature set by the manufacturer is 42 degrees, this is the optimum temperature.
To turn on the device, you just need to press the power button and open the hot water tap. To control the temperature, you must press the "+" or "-" button and select the temperature you need. Until the temperature you have selected is reached, the reading on the monitor will flash.
If it does not reach this value within thirty seconds, the water faucet icon is displayed on the monitor, which indicates the need to increase or decrease the water flow. If you press the P button, the programmed constant temperature of 42 degrees will appear. Setting the minimum temperature reduces energy consumption and makes it possible to reduce the formation of limescale in the heat exchanger.
But if you know how to turn on the column, but encounter malfunctions (the flame goes out, does not ignite), then where the causes and methods for their elimination are described.
Thanks to a wide range of functions and high quality, the Bosch geyser is very popular all over the world. With the help of this unit, you can create an autonomous hot water supply in an apartment, private cottage or country house.There is a great abundance of models of this brand on the market, among which a simple buyer can get confused and buy a Bosch geyser that is not suitable for certain conditions. To avoid such a situation, you should study in detail the principle of operation of water heaters, characteristics and varieties.
Peculiarities
Electrolux water heaters are equipment that can heat water and maintain its temperature for a long time and without interruption. The design can perform its functions in any conditions. The technical features of the devices provide speakers with reliability and safety. The water heating equipment of this company is able to work not only on one or several points of water intake. It has found wide use both in the domestic sphere and in offices.
Each model has its own characteristics and performance, so when choosing a product, the buyer should be guided by personal taste and needs. Consider the main characteristics of the Electrolux speakers.
-
Power.
The manufacturer sells a product that can be of three types and differ from each other in performance and power: low-power equipment - 17-19 kilowatts; medium power - 20-24 kilowatts; powerful - 25-31 kilowatts. Each presented option can work for a certain number of water intake points. -
Control method.
The manual control method has long been outdated, it has been replaced by a new, more advanced one. Modern models of Electrolux geysers have a built-in burner with independent power modeling. Thanks to this, the equipment is able to control the temperature regime, as well as maintain it at the required level, even with insufficient pressure. The automatic system independently selects and regulates the temperature. -
Ignition type.
The manufacturer sells several models of gas water heaters: with manual, automatic and piezo ignition. The equipment of the first option is now practically not found. Automatic ignition is the most convenient option to use. -
Safety.
Electrolux speakers are equipped with three-level and four-level security. When unexpected interruptions occur in the system, for example, a pressure change, a gas or water leak occurs, the device turns itself off.
Electrolux water heating equipment is characterized not only by advanced technical parameters, but also by an attractive design. Everyone will be able to choose for themselves the ideal option that fits perfectly into the interior. Geysers are presented both in a minimalist style and with an improved external panel. Devices on the front panel of which you can change pictures that fit the style of the room are very popular.
How to fire up the machine
Before starting work, open the gas and water valves.
There are three ways to light a gas column.
Manually
The manual method has been used in old style models
. In this case, you have to light it with matches. Here it was necessary to perform a number of such preliminary manipulations:
- open the water supply connected to the device;
- open the main valve for fuel flow to the igniter;
- light the wick with matches;
- turn on the valve (main) for gas supply.
With a piezo ignition
We can say that this column is a semiautomatic device. How to use a geyser of this type? Will be enough press the button
to ignite the wick in the combustion chamber. With the help of mechanical force, a spark is converted - it turns out to be enough for the ignition filter to ignite. With this method, a number of mandatory requirements must also be met:
- in order to ignite the main burner, it will be necessary to turn on the main regulator in the fuel supply;
- the pilot filter will remain lit when the regulator is returned to the main position and the water is turned off.
Automatically
The ability to automatically turn on provides completely advanced modifications that are easy and safe to use even for beginners. Hydropower system
offer most modern manufacturers (Bosch, its direct competitor Electrolux and many others). The process of starting work is simplified to the limit.
- For example, in the Bosch Therm 6000 O, the water pressure drives the turbine. It starts an automatic ignition system inside the device for both the wick and the main burner.
- The manufacturer Bosch has the Therm 2000 O and Therm 4000 O lines, which carry out electric ignition from batteries (it will be necessary to monitor their service life).
- Bosch AM1E series speakers already have a digital control panel that will immediately show all possible switching errors.
The fully automated process has one disadvantage: many homes have low water supply pressure, which may not be enough to keep the turbine working properly.
In addition, such devices are significantly more expensive than their less advanced counterparts.
Quality assurance
The gas water heater has certificates of compliance with the requirements of GOST regulatory documents.
Geyser Electrolux GWH 265 ERN NANO PLUS - gas water heater with electronic ignition of the burner is easy to use. The ignition of the burner occurs automatically when the hot water tap is turned on, then the heating power and water temperature are adjusted using ergonomic handles on the front control panel. The control of the presence of the flame is carried out by the ionization control unit. The performance of the NanoPlus geyser is 10 liters per minute.
In this model, the gas burner is made of high quality stainless steel. In the model Geyser Electrolux GWH 265 ERN NANO PLUS, the chimney diameter is 110 mm, which makes it possible to connect to almost any exhaust system.
heat exchanger
In gas water heaters Geyser Electrolux GWH 265 ERN NANO PLUS heat exchanger is made of high quality oxygen-free copper using OXYGEN FREE technology, which maximizes its resistance to oxidation and high temperatures during operation and does not require any additional protective layers.
The heat exchanger in NanoPlus geysers does not contain lead and tin, which indicates its safety for human health and the environment, as well as high reliability and durability.
Digital display
On the control panel of the geyser Geyser Electrolux GWH 265 ERN NANO PLUS there is a modern digital LCD display with intelligent control. The display shows the water heating temperature, as well as various functions of the column operation: indication of the presence of a flame on the burner and the presence of water circulation in the heat exchanger, indication of the battery charge level for ignition. If the charge level for ignition is not enough, the battery icon will flash, which means that it needs to be replaced.
Multi-level security system
The first level of the security system is a traction sensor. It works when there is no draft in the chimney or reverse draft appears, turning off the gas supply. The second level of the security system is a protective thermostat that protects the column from overheating. The third level of safety is a hydraulic safety valve designed to control the circulation of water in the heat exchanger. This protects the gas column from overheating. The fourth level - flame ionization control controls the presence or absence of a flame on the burner. The intelligent control system controls the operation of all sensors. In case of any malfunctions or errors in the operation of the column, an error code is displayed on the LCD display, which is very convenient for maintenance and operation of the device.
Operation at low gas pressure
Electrolux geysers are designed taking into account the peculiarities of work in Russia, Ukraine, Kazakhstan, Belarus and other post-Soviet countries, where the pressure of gas and water in the mains is sometimes quite low. The minimum water pressure for switching on is 0.15 bar, gas - 13 mbar.
Warranty 2 years
GWH 285 ERN NanoPro - Specifications
The described Electrolux geyser, reviews of which are mostly positive, has several advantages:
- durability;
- ease of control and management;
- ease of use.
As for durability, the model is provided with a heat exchanger, which is made using innovative technology. This increases its resistance to various negative impacts during operation. The design, according to consumers, is also distinguished by ease of control and management. The equipment is equipped with a panel with indication and display. With this interactive system, you can monitor the temperature, the presence of a flame, the battery level and water circulation.
Buyers especially emphasize that such Electrolux geysers, the characteristics of which are presented in the article, should be studied by you before purchasing the goods. They are distinguished by ease of use, because they have ignition electrodes that provide smooth, quiet ignition with ionization flame control.
The owners of gas water heaters, who have already managed to enjoy their quality, consider additional advantages:
- the presence of a protective thermostat, thrust sensor, hydraulic safety valve;
- heating power adjustment function;
- intelligent control;
- European technologies of smoke removal;
- universal chimney diameter.
Electrolux column - malfunctions and methods for their elimination
Common malfunctions of the Electrolux gas flow boiler are described in the table:
|
What caused the malfunction |
Elimination Methods |
|
|
The burner does not turn on. |
|
|
|
Bad water heating. |
|
|
|
During operation, the main burner goes out. |
|
|
|
There is a smell of gas. |
Most of the troubleshooting, as can be seen from the table, can be done independently. If the boiler does not work after following the recommendations described, you should contact the Gas Service or Service Center and call the wizard.
Installing a flow heater makes life much easier for users. Hot water can be used without interruption all year round. The main thing is to choose the right technique. Geyser "Electrolux" is one of the most popular brands. What is special about it, what are its disadvantages and advantages, read below.
Popular Models
Electrolux has proven itself from the very best side. This is evidenced by customer reviews and experts. Electrolux GWH 265 ERN Nano Plus is a heater in demand today, which is characterized by a power of 20 kW, as well as a capacity of ten liters of water per minute. Thanks to the presence of electric ignition, it is easy to use the equipment, for this you need to change the batteries in a timely manner and open the mixer. The dimensions of the device allow you to install it even in a small room.
The steel burner of this model and the copper heat exchanger have a long service life. The radiator does not contain oxygen and lead, so the equipment is absolutely safe for others. Nano Plus has a temperature limiter that protects the device from overheating. Judging by the feedback from consumers, this model is not only compact, but also easy to use. There are practically no shortcomings, but buyers say that if the equipment is configured incorrectly, it can malfunction and make noise. That is why it is necessary to strictly follow the rules in the instructions.
Another interesting model of equipment is the Electrolux GWH 350 RN geyser. Its main advantages:
- long service life;
- simplicity of design;
- productivity up to fourteen liters of water per minute;
- the presence of a window for controlling the flame;
- the presence of piezo ignition, so the device does not need to change batteries.
In consumer reviews there is information about some of the shortcomings, that arise when using this model:
- large body dimensions;
- the flame does not ignite instantly.
Often users prefer the model of water heating equipment Electrolux GWH 275 SRN. This device is characterized by unpretentiousness, simplicity and reliability. Advantages:
- simple and at the same time interesting design;
- simple design, which is not burdened by electronics;
- long service life;
- reliable elements, thanks to which water leaks are excluded;
- quick connection and no need to change batteries.
Flaws:
- the geyser must be turned off during a long absence, since an igniter is built into it;
- the knobs are too sensitive, so there are some difficulties in setting the temperature.
Description column brand GWH 285 ERN NanoPro
This Electrolux geyser costs 12,400 rubles. It is a flowing gas water heater equipped with a stainless steel burner and a copper heat exchanger. The function of maintaining the heating temperature and smooth adjustment became possible thanks to modern INVERTER Control technology.
On the device panel there is a heating temperature regulator and a power regulator. In the same place, the user will be able to find the key that is responsible for turning it on and off. The operating status indicator is located in a prominent place. It will glow green when the burner is operating. Analysis of the operation of the water heater and continuous monitoring of operation are provided by Intelligent control technology.
How to light a gas water heater bosch Therm 4000 O WR 101315 -2 P.
The difference between these models lies in the amount of heated water per minute. A device equipped with piezo ignition is indicated by the letter P at the end of the name. It has the ability to adjust two parameters, water and combustion power. To turn on the column, you must move the slider to the ignition position, drown it.
Press the piezo ignition button several times until a flame appears on the pilot burner. Wait ten seconds, release the slider and move it to the desired power position. Moving the slider to the right increases power, and to the left decreases it. The column is in standby mode all the time, if you need to get hot water, you just need to open the hot water valve.
When you need to turn off, move the slider to the left until it stops. After a couple of seconds, the pilot flame will go out. Close the gas valve and water valves.
Watch the video below for instructions on how to turn it on:
Device and principle of operation
All geysers have a similar design and functioning system. The Electrolux geyser on the body has handles - toggle switches, they regulate the heating power and water supply. Each device has its own throughput, some columns can heat up to sixteen liters of liquid per minute. Thanks to the optimal chimney connector, the equipment of this manufacturer is characterized by versatility. Geysers can work together with an exhaust system.
Equipment elements:
- control pads and adjustment buttons (many Electrolux models are equipped with a display on which you can see the water temperature and all other indicators);
- solenoid valve;
- copper heat exchanger;
- openings for water and gas inlet;
- a hole for the exit of the heated liquid;
- chimney hole;
- drain tap;
- fastener elements.
Due to the quality of parts and design, this equipment is absolutely adapted for use in our country. If the water supply pressure or gas pressure changes in the line, the device will function at the same level.Two pipes are mounted in the body of gas water heaters, the first for gas supply, the second for water. At the bottom of the equipment are burners that have a basic appearance and ignition. Depending on the selected model, the device has electric ignition, piezo ignition or manual ignition.
Design
- The GWH series water heater has a multi-level security system.
- The first level of the security system is a traction sensor. The sensor is triggered in the absence or appearance of reverse thrust, turning off the gas supply to the main burner.
- The second level of the security system is a thermocouple, which automatically stops the gas supply when the ignition burner flame goes out.
- The third level of safety is a hydraulic safety valve, which is necessary to ensure that gas enters the main burner only if water is circulating in the heat exchanger. This protects the gas column from overheating.
- The modulating burner automatically adjusts the height of the flame in case of pressure drops in the water supply system and an increase in water flow, thereby ensuring the desired heating temperature.
- Electrolux gas instantaneous water heaters are equipped with a copper heat exchanger.
- The heat exchanger is made of electrolytic copper, the design of which prevents the formation of scale, and a special coating protects the heat exchanger from high temperatures.
- The burner in Electrolux water heaters is made of high quality stainless steel, which significantly increases its service life.
- The column is turned on automatically when a hot water tap is opened, thanks to an electric spark from the batteries. After closing the hot water tap, the flame of the pilot burner automatically turns off. The absence of a pilot burner flame significantly reduces gas consumption.
- Gas water heater Electrolux GWH series can operate in one of two modes - more economical or more powerful.
- The chimney diameter is 110 mm, which makes it possible to connect the water heater to almost any exhaust system.
- Real European quality based on modern technologies, perfect design of the water heater and a high level of safety enable reliable and stable operation.
