Tunguska specifics and installation of the furnace
One of the firms called "Termofor" introduced the Tunguska oven for baths to the market. Any equipment tends to wear out, lose some functions, and sooner or later the question arises of replacing it.
Not everyone knows what to pay attention to and how not to make a mistake when choosing a stove
When choosing from a variety of oven manufacturers, it is better to give preference to well-known companies with a good reputation.
Bathing not only brings pleasure, but also improves human health. In order for bath procedures to be beneficial, some rules must be taken into account: the arrangement of the premises must be carried out in compliance with safety precautions, and the choice of equipment must be taken with all responsibility.
Tunguska oven
Tunguska is a universal sauna stove that can work both in a traditional Russian bath and heat saunas.
Advantages over other similar devices:
- the stove is almost immediately ready for use, for work it is enough just to connect it to the chimney (in the figure, the installation diagram of the tunguska);
- value for money;
- the size of the oven allows you to install it even in a small room;
- good heat dissipation;
- dry wood (natural fuel) is used;
- a wide range of models;
- safety and reliability;
- long period of use;
- design features of furnaces;
- aesthetics and beauty.
Design features of tunguska furnaces
Due to the fact that the thickness of the furnace wall is no more than 2 mm, such a stove for a bath is able to heat up the room and maintain the desired temperature in the shortest possible time. Features of other parts of the device allow you to quickly replace the heated air with cold air, removing it through special slots. The cold air stream is then heated up again and expelled again.
The weight of the furnace does not exceed 58 kg (unlike its predecessors) due to the fact that parts made of heavy materials have been replaced with steel.
In the firebox of the Tunguska, a cast-iron grate was made for laying firewood. This allows you to maintain the fire at the right level, as a result of which all parts located nearby are heated.
The stove-heater has a shape in the form of a pyramid with five sides, which allows it to heat up well. With the help of an ash box, you can not only perform its main function, but also regulate the intensity of combustion.
The door surface cools itself and creates maximum safety and ease of use.
The remote thermal channel made it possible to install the Tunguska in adjacent rooms. If desired, you can replace the standard door with fire-resistant glass, which will create a cozy and romantic atmosphere, resembling a decorative fireplace in appearance.
Types of tanks and how to make the right choice
In total, in the tunguska of the Termofor manufacturer, there are two types of tanks:
- Built-in tank in which water is heated by conduction.
- Tank "Samovar" - heat comes from the chimney on which the tank is located.
Important when choosing a tank is its volume. You can roughly calculate how much volume is needed based on the fact that about 9-10 liters of water are consumed per person, the same amount will be required to park brooms.
Summing up, we can conclude that the Tunguska bath stove is the best option in terms of price, quality, safety and appearance. Such a stove is suitable for any size baths and saunas, which significantly distinguishes it from other stoves. And, of course, an important aspect will be that you don’t have to hire specialists to install such a stove, anyone can handle this task on their own.
Industrial oven for bath Varvara, Tunguska and Enchantress with a water tank
The choice of stove should be approached very seriously, because this is the "heart" of your bath.If you decide to purchase a ready-made factory stove and do not want to make stoves for a bath with a water tank with your own hands, then in this article we will talk about the most popular models of stoves in which a remote tank can be used.
It should be noted that the choice of a particular stove for a bath is determined by many conditions, in particular:
- Steam room size
- Type of fuel
- Type of heating
- Geographical proximity to gas pipelines and power lines
- Also, one should not forget about the location of the bath itself relative to other buildings.
According to surveys, most people highly appreciate the economy, ease of use and safety for humans, as well as the aesthetic component in the oven. If you have a home-made stove, then we recommend building a foundation for a stove in a bathhouse.
Let's consider industrial production furnaces in more detail
Proponents of factory furnaces note their high efficiency and ease of operation. Also, do not forget about the various modes of operation. Unlike traditional stoves, it is possible to set and adjust (including automatically) the duration of heating the room, fuel combustion, water vapor density, steam room temperature, water temperature and start / stop time
A good stove creates an atmosphere, and in order not to lose heat, we recommend paying attention to the warm floor in the bath
Tunguska ovens
In the photo: tunguska - a stove for a bath
Tunguska - a stove for a middle-class bath, made of heat-resistant steel. Prices for this model on the Internet from 10,000 rubles. The instruction manual is included.
Furnaces Tunguska VITRA
In the photo: Tunguska VITRA
A very important issue is the convenience of stone filling and removal of combustion products (since improper ventilation can cause headaches, even death).
The most indicative in terms of exhaust gas removal is the Tunguska bath stove model. To preserve the heat generated by the stove, you need to think about warming the ceiling of the bath.
A review of one of the Termofor bath stoves can be viewed on the video:
Furnace Enchantress
Photo stove for bath enchantress
The manufacturer encloses instructions for using the oven.
Sauna stove Varvara
Do not forget about compliance with fire safety requirements - both protection from smoke and fire. Chimneys are used to remove gases (we note that it is not easy to provide sealing on our own), for fire protection - separate fuel loading from the steam room. In the photo, the stove for the Varvara bath, with a water tank welded to the side - this arrangement of the tank is typical.
Barbarian sauna stove with side tank 50l
Of course, you can take out both the fuel load and the water tank to a separate (other) room. The aforementioned stoves for the Varvara bath offer the possibility of installing the tank on the floor above (for example, in the attic) or in another room. Due to its design, even the separation of the tank and the steam room does not lead to heat loss.
In the photo: the structure of the barbarian bath stove with an external water tank
So, the modern market is represented by a fairly wide range of furnaces of various designs and types of fuel. They are reliable and economical, as a rule, it is proposed to install the furnace so that you pay for the order and use the finished furnace. The price range is quite wide
7-50 thousand rubles, you will probably be able to choose the right heating, we also recommend that you read the reviews in advance.
