Counters for heating batteries in the apartment. Heat meter Danfoss radiator metersdistributors, individual metering

Key Benefits

Danfoss heat meters are an intelligent device that will allow you to save quite impressive money when heating rooms of various types. Due to the presence of an intelligent “stuffing”, the device qualitatively calculates the spent energy resources.

Each production step is tightly controlled. Danfoss heat meters go through a series of tests and trials at the factory. If the installation and operation rules declared by the manufacturer are observed, a long period of operation of the devices is guaranteed.

Other advantages include

• possibility of mounting in any position
• high flow measurement accuracy
• increased wear resistance
• low pressure loss.

Basic models of heat distributors

1. Versions INDIV-3 and INDIV-3R. These distributors have one built-in temperature sensor. Such devices use the principle of accumulating the resulting reading over time at a rate that is determined by the output signal of the built-in sensor.
2. Versions INDIV-3R2 and INDIV-3RD. These models have 2 temperature sensors (heater surface and ambient air). In the INDIV-3R2 distributor, both sensors are built into the housing. In the NDIV-3RD device, the air temperature sensor is built-in, and the heater surface sensor is remote.

All types of valves allow memorizing and displaying the resulting reading on a pre-set day of the year. The devices are used in internal heating systems.

Any distributor can be installed on:

1. Sectional radiator made of cast steel or cast iron.
2. Aluminum heating battery.
3. Tubular and panel radiators.
4. Pipe registers.
5. Convectors.

The heat distributor solves the following tasks:

1. Accumulation of consumption readings.
2. Indication of consumption readings for the previous year.
3. Checksum indication for verification.

In addition, the distributor is equipped with a self-test system.

Specifications INDIV-3:

1. Design temperature range in heat supply systems: 55-105 degrees Celsius.
2. Starting reference temperature: June-August: 40 degrees Celsius, September-May: 30 degrees Celsius.
3. Heat distributor power supply: lithium battery.
4. Dimensions: 40x76x25 mm.
5. Distributor measurement accuracy: complies with European standard EN834.

Advantages of ordering heat meters-distributors in our company

1. Wide range of models. You can order a heat distributor of both the previous and the latest generation.
2. Optimal cost. You can order any distributor model at a favorable price with a discount. We offer wholesale and regular customers participation in special promotions.
3. Help with choosing. Our experts are ready to tell you about all heat distributors and answer your questions.
4. Sufficient stock of products. You can order heat meters from us in any required quantity without a long wait for deliveries from the manufacturer.
5. Prompt delivery. You can start using any distributor in the near future. Transportation of heat meters-distributors is carried out by the company's own transport in Moscow and in the regions.

Contact us! Control heat in a modern format and cut costs.

code number	Description	Price (EUR)	Sketch
088H2330	Compact radiator meter-distributor INDIV-5 with visual reading from the LCD display	30,83
088H2203	Compact radiator meter-distributor INDIV-3R with remote wireless data transmission (radio)	43,39

Radiator meter-distributor INDIV new generation

code number	Description	Price (EUR)	Sketch
187F0001	The meter-distributor radiator in a compact design with an LCD display has replaced the INDIV-5	43,39

code number	Description	Price (EUR)	Sketch
088H2250	Two-channel pulse adapter INDIV PAD for connecting 2 meters (water, electricity, gas) with a pulse output	74,79
088H2251	Network node, standard with independent power supply NNB-Std	306,28
088H2257	Network node with communication module for remote reading with GSM interface NNV-GSM (mains powered)	1595,22
088H2254	Network node with communication module for remote reading with RS232 interface NNV-232 (mains powered)	459,42
088H2256	Network node with communication module for remote reading with Ethernet interface NNV-IP (mains powered)	1512,26

Radio system software

code number	Description	Price (EUR)
	Parameterization program for Indmet meters
	Program for reading data from counters Indread
	Indserv tool for setting up and reading data from the INDIV AMR system
	Parameterization program for Indcomm main network node including connecting cable

Kit for mounting the meter-distributor on cast-iron sectional radiators

Gap between sections no more than 34 mm

code number	Description	Price (EUR)	Sketch
088H2211		1,32
088H2230	T-nut, 65 mm	0,85
	Bolt M 4 x 35 mm
Kit cost

Gap between sections more than 34 mm

code number	Description	Price (EUR)	Sketch
088H2212	Thermal adapter, standard, 55 mm	1,32
088H2230	T-nut, 65 mm	0,85
	Bolt M 4 x 35 mm
Kit cost

Kit for mounting the meter-distributor on panel radiators

code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Tail nut M 3 x 6 mm (requires ordering 2 pieces per meter)
	Welding bolt M 3 x 10 mm (required to order 2 pcs. for 1 meter)
Kit cost

Kit for mounting the meter-distributor on convectors

Mounting on "fins" (convectors "Universal", "Santekhprom-Avto", KV)

code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
088H2270	Cutting rod M 3 x 330 mm	2,81
	Castellated nut M 3 mm (required to order 2 pcs. per meter)
Kit cost

Installation on the "kalach" (convectors "Akkord", "Comfort", "Progress")

code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Tail nut M 3 x 6 mm (requires ordering 2 pcs per meter)
	Welding bolt M 3 x 10 mm (order 2 per meter)
Kit cost

Kit for mounting the meter-distributor on tubular radiators

code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
088H2241 or 088H2242	T-nut, 36 mm or 45 mm	6,96
	Bolt M 4 x 35 mm
Kit cost

Kit for mounting the meter-distributor on aluminum radiators

Gap between sections no more than 4 mm

code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Self-tapping bolt C 4.2 x 25 mm (requires ordering 2 pcs. for 1 meter)
Kit cost

Gap between sections more than 4 mm

code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Square studs (requires ordering 2 pcs per counter)
	Screw M 3 x 25 mm (requires ordering 2 pcs. for 1 meter)
Kit cost

General building heat meters

The danfoss general house meter is designed to keep records of high costs and loads of thermal energy. With it, you can determine the heat consumption in general, making payment upon consumption.

Accounting can be carried out according to an open or closed scheme. Also, with the help of this device, control of thermal power, flow rate, amount of coolant and other parameters is carried out.

The price of a Danfoss apartment heat meter will depend on the specific model. But in order to make the right choice, it is better to consult with experts who will answer any of your questions.

Santekhkomplekt is the official dealer of the well-known Danfoss sanitary fittings on the world market. On the company's website you can purchase high quality heat meters per apartment.Depending on the purpose, heat meters can be apartment and house. Danfoss apartment heat meters are incredibly easy to use and allow you to accurately record the heat in every apartment.

Apartment heat meter
is a device for accurately measuring and recording the consumption of consumed heat energy for an individual apartment.

Danfoss residential individual heat meters are widely used in heating systems and provide high accuracy of calculation and display of the necessary data, which allows you to control energy consumption and, therefore, save resources and money. Danfos heat meters consist of a flow meter and a calculator.

These devices are universal. The existing schemes of heat meters make it possible to integrate them not only into systems under construction, but also into those already in operation, although it should be remembered that in the second case it will be necessary to redo the engineering network.

How to choose the right Danfoss heat meters

Products manufactured in Denmark have gained universal popularity and fame throughout the world. It will be necessary to meet the installed heat devices. The presented wide range enables all those in need to manage their financial resources as efficiently as possible in order to achieve the desired result.

• source of power
• measurement accuracy and error level
• dynamic measurement range
• functional content
• connection method
• price.

Almost the entire model range is distinguished by rather small dimensions, which provide additional convenience when performing installation work.

General building heat meters

You can also buy general house heat meters from us, designed to account for high costs and high loads of heat energy. Heat meter for home
allows you to determine the amount of heat consumed in general, making payment upon consumption. Accounting for thermal energy can be carried out according to an open and closed scheme of heat consumption. The general house heat meter controls parameters such as heat output, coolant flow, coolant quantity, coolant temperatures and their differences, and others. Heat meters perform many functions: measurement, calculation, archiving, indication and output of indicators to external devices.

Danfoss supplies unique solutions to the Russian market, including heat metering equipment. The range includes a variety of types of products:

• ultrasonic;
• mechanical;
• distribution meters

• apartment heat meter Danfoss;
• common house heat meter;
• distributors;
• components for installation and operation of equipment.

The Danfoss T-34 heat meter, designed for general house use, is also very popular. It is effective in both closed and open heating and hot water systems. The equipment is designed reliably and of high quality - practice shows that its use does not require large operating costs, and accuracy makes it possible to reliably take into account heat consumption for any period of time. Our company has the opportunity to supply you with this equipment at a very competitive price.

In addition to common house, we also offer application models. For example, the Danfoss M Cal Compact apartment heat meter is very popular - the price, quality, reliability and availability of control software make it in demand on the market

We recommend that you pay attention to it if you are looking for equipment for use in your apartment. We also advise you to pay attention to the ultrasonic model SonoSelect/SonoSafe, which can be controlled remotely - via a smartphone

Very comfortable and modern design.

And a little about the advantages of our offer:

• direct deliveries from the manufacturer;
• good price without "cheats";
• official guarantee and reliable service;
• assistance in setting up and installing equipment;
• free consultations when choosing models.

Contact us!