Imaginary benefit
Water dividers in no way help to really save money, since they are not able to change the composition of the water. All the miraculous properties that advertisers endowed with such devices are speculation. In addition, it should be borne in mind that the main water costs of the average family are the use of a shower and a cistern, while bathrooms are rarely used. Savers cannot be physically installed on these plumbing elements, therefore, theoretically, they are able to reduce the cost of not all the water used, but only that which passes through the nozzles.
To reduce water consumption on a principle similar to aerators, you need to do one simple thing - reduce the pressure in the tap. Household tasks such as washing dishes or taking a shower have not been proven to be adversely affected by this method of reducing water use.
water saving aerator nozzle usage advantages
Along with a clear economic benefit, the acquisition of a water saver has other positive properties.
- The effect when using the device is saving about 60% of water.
- Uniform, without splashes and water hammers characteristic of a conventional tap, water flow.
- Saving the intensity of the flow of water from the tap with an economizer aerator.
- The dual mode of operation of the device, the first is typical when using it for everyday needs and the second mode is for quickly filling containers.
- Installation is very simple, anyone can do it, even a child can install the device.
- Ability to avoid blockages.
- The use in the manufacture of the device of stainless steel with a special treatment that counteracts the formation of lime deposits.
- The aerator membrane can be used as a filter element.
- The aerator-saver has dimensions that do not exceed the standard overall dimensions of a conventional nozzle on a faucet.
- The appearance of the device enhances the aesthetic design of the faucet.
- The design feature of the aerator allows you to easily change the angle of the direction of the water jet, making it very convenient for use in everyday household use.
- Versatility, the ability to use with any valves of standard diameter.
- Long service life.
The water pressure control is easily adjustable, you just need to slightly press on the bottom of the aerator and set it to the top position - the pressure will decrease. You can restore the pressure by setting the nozzle to the lowest position. The mechanical pressure regulator is located inside the device.
Advantages of self-production
A store aerator is expensive, but its real price is approximately 50-100 rubles, depending on the design. However, manufacturers promise that their know-how pays off in just a couple of months or even one. This is a false statement, which we will now prove.
Attention! All calculations are approximate and may differ from actual figures. The average cost of an aerator is 1300 rubles
We take 2 pieces, since we are immediately offered to buy nozzles for all the taps in the house, it turns out 2600 rubles. If the price of 1 cubic meter of cold water is 30 rubles, then you need to use as many as 86 cubic meters per month to get the cost of nozzles. For a more detailed understanding of this figure, we translate it into the number of full baths. One standard bath contains approximately 200 liters of water, 430 baths are obtained per month, which is 14 baths per day or every half hour per day
The average cost of an aerator is 1300 rubles. We take 2 pieces, since we are immediately offered to buy nozzles for all the taps in the house, it turns out 2600 rubles. If the price of 1 cubic meter of cold water is 30 rubles, then you need to use as many as 86 cubic meters per month to get the cost of nozzles.For a more detailed understanding of this figure, we translate it into the number of full baths. One standard bath contains approximately 200 liters of water, 430 baths are obtained per month, which is 14 baths per day or every half hour per day.
With such simple calculations, it is clear that it will be unrealistic to “recapture” the cost of economizers in one or even two months. Therefore, if you want to save money, you can make your own aerator.
Faucet nozzle saving water on a living example
To calculate how much water is used to wash dishes for a typical family of 4, let's take the initial reading of the water meter.
Let's say they are equal: hot water - 50.535 liters, cold water - 80.400 liters.
The water has a temperature, average, tolerable for our hands, but closer to hot because it is required to wash greasy dishes.
The set of dirty dishes includes 8 deep and shallow plates, 4 cups, 1 saucepan, frying pan, 2 salad bowls, 1 teapot, 16 cutlery including spoons, forks, small spoons, knives. In general, this is a set of dishes after dinner for a family of 4.
The duration of washing dishes was 19 minutes.
Even without constantly using a strong pressure of water, but periodically turning it off,
The water meter at the end of washing showed: hot water -50.556 liters, that is, 21 liters were spent.
Cold water 80.420 liters, 20 liters of water was spent.
By repeating the experience by connecting the water saver, you can see for yourself its effectiveness.
When using this device, water consumption due to aeration (saturation of water with air) decreased by 60%, and both counters with the same volume of dirty dishes counted a total of 19 liters (10 liters of hot water and 9 liters of cold).
The result, as you can see, on the face, everyone can see for himself!
An aerator nozzle for saving water is certainly a very useful and inexpensive device, the price for it ranges from 1000 to 1550 rubles.
This store is able to offer goods of really good European quality. The German development guarantees a high-quality device made of high-tech materials that are not subject to corrosion and the effects of salt water solutions that counteract the formation of limescale (water stone). And, therefore, the materials from which this device is made have antibacterial and antimicrobial qualities.
This store closely cooperates with the Czech company Tescoma, which is the largest manufacturer of plumbing and plumbing equipment. It is Tescoma that is one of the main manufacturers of aerator economizer to save water.
The water-saving aerator is only part of the design program for a range of devices from the manufacturer Tescoma aimed at the service of people, designed for the economical use of water resources.
Faucet aerator which one to choose, or can do it yourself
Despite their very small size, these particles perfectly settle on the mesh surface of the aerator.
However, this is not the only purpose of the filter nozzle. Another purpose of using an aerator is to conserve water. Agree, we all love to wash our hands or dishes under a large stream of water. The aerator allows you to save it, because, by separating tap water into mesh layers, it mixes air bubbles into it. Thanks to this, the flow of water from the mixer visually seems to us large, although in fact it is less than what we are used to. In addition, the aerator for the faucet serves to level the jet, it always flows instantly and without delay. But in those taps that do not have this nozzle, the jet flows crookedly and splashes.
As you can see, the faucet aerator is a necessary accessory.
What are faucet aerators?
Now almost every mixer includes this nozzle.Most often there is a rotary aerator for the mixer, thanks to which we can, by combining cold and hot water, get a pleasant warm jet at the outlet.
But for lovers of original little things, an aerator for a faucet with backlight is suitable. It has built-in diodes with a temperature sensor, which is powered by a microturbine. When you turn on the water, the sink is illuminated by a pleasant soft light coming from the tip of the tap. Moreover, depending on the temperature of the jet, the color changes: at a temperature of less than 29 ⁰С, green lighting comes out, at 30-38 ⁰С - blue, and above 39⁰С - red. By the way, with the help of this attachment, the process of teaching children to wash their hands will be much faster.
In houses with excellent tap water pressure, you can install a rotating faucet aerator. Thanks to the hinges built into it, you can switch between normal jet or shower mode, or direct the jet – all you have to do is turn the nozzle.
When buying a faucet or a separate aerator, it is important to pay attention to the materials from which the nozzle is made. The aerator consists of a housing, mesh filters and a rubber gasket. The case can be metal or plastic, the latter option being cheaper, but short-lived and cannot withstand the strong pressure of tap water
However, the metal case is not of the same quality: it is better to give preference to brass, but pressed metal is not much more durable than plastic.
The case can be metal or plastic, the latter option being cheaper, but short-lived and cannot withstand the strong pressure of tap water. However, the metal case is not of the same quality: it is better to give preference to brass, but pressed metal is not much more durable than plastic.
Magnetic nozzles for saving water
This type of device is mounted on water meters. It acts on the anti-magnetic clutch installed inside the device and stops the calculation of the consumed water.
Magnetic nozzles are produced from various materials: neodymium, iron, boron and other metals that can affect the antimagnetic field. They have an affordable cost and are very simply fixed on the water meter body.
However, those who decide to purchase such a nozzle should be aware that any third-party impact on the water meter is a violation of the rules for using housing and communal services. And if you find magnets, you can impose a significant fine. It should be noted that a properly selected magnet will not break the water meter, and after removing it, the meter will function in standard mode.
Aerator 100
With the advent of internal sewerage systems, the need arose to install a sewer aerator. Indeed, for normal and uninterrupted operation, it is necessary to ensure stable air exchange of sewer networks with the external environment.
According to SNiP, this function is performed by a riser, which must be brought out above the roof level with a height of at least 500 mm. In this case, the distance from the riser to the nearest window must be at least 5 m.
A deflector is put on the end of the riser. It is protected from dust, moisture and debris. However, in winter there is a risk of ice formation on the pipe. Therefore, the solution in this situation is to bring the pipe to the attic. But in this case, the penetration of an unpleasant odor into the room cannot be avoided.
The best solution to this problem is to install an aerator.
The mounting element will also depend on the installation method. It can be both external and internal. Also, a 110 mm air valve for sewage can be mounted on additional risers of the sewer system.
When the ventilation of the main pipe is carried out by bringing it to the roof and no negative effects are observed, it is possible to install a vacuum valve 110 for sewage to additional risers.
In general, the 110 mm sewer valve has a number of advantages.
Advantages:
- Pipe savings. Since it is not necessary to bring the vertical pipe through the roof slab, the footage of the pipeline will be significantly less.
- Pressure stabilization. It is noteworthy that the ventilation valve for the sewer does not depend on electricity. It carries out its work with the help of air currents.
- Availability. Affordable price for a vacuum valve 110 for sewage attracts the interest of consumers.
- Simplicity in installation work.
The average price for a 110 mm air valve for sewage is 335 rubles.
By the way, you can install the aerator not only on a vertical pipe, but also on a horizontal one.
Water saver in the form of a faucet nozzle true or false
By the way, some aerators are made of plastic.
Faucet aerator nozzle: why is it needed?
As you probably already guessed, one of the main purposes of the aerator on the mixer is to filter the incoming drinking water. The fact is that although water goes through various levels of purification before it enters the water supply, it still contains small particles. These are, first of all, pebbles, elements of rust, scale that appear in water when it comes into contact with water pipes. Despite their very small size, these particles perfectly settle on the mesh surface of the aerator.
However, this is not the only purpose of the filter nozzle. Another purpose of using an aerator is to conserve water. Agree, we all love to wash our hands or dishes under a large stream of water. The aerator allows you to save it, because, by separating tap water into mesh layers, it mixes air bubbles into it. Thanks to this, the flow of water from the mixer visually seems to us large, although in fact it is less than what we are used to. In addition, the aerator for the faucet serves to level the jet, it always flows instantly and without delay. But in those taps that do not have this nozzle, the jet flows crookedly and splashes.
As you can see, the faucet aerator is a necessary accessory.
What are faucet aerators?
Now almost every mixer includes this nozzle. Most often there is a rotary aerator for the mixer, thanks to which we can, by combining cold and hot water, get a pleasant warm jet at the outlet.
But for lovers of original little things, an aerator for a faucet with backlight is suitable. It has built-in diodes with a temperature sensor, which is powered by a microturbine. When you turn on the water, the sink is illuminated by a pleasant soft light coming from the tip of the tap. Moreover, depending on the temperature of the jet, the color changes: at a temperature of less than 29 ⁰С, green lighting comes out, at 30-38 ⁰С - blue, and above 39⁰С - red. By the way, with the help of this attachment, the process of teaching children to wash their hands will be much faster.
In houses with excellent tap water pressure, you can install a rotating faucet aerator. Thanks to the hinges built into it, you can switch between normal jet or shower mode, or direct the jet – all you have to do is turn the nozzle.
When buying a faucet or a separate aerator, it is important to pay attention to the materials from which the nozzle is made. The aerator consists of a housing, mesh filters and a rubber gasket. The case can be metal or plastic, the latter option being cheaper, but short-lived and cannot withstand the strong pressure of tap water
However, the metal case is not of the same quality: it is better to give preference to brass, but pressed metal is not much more durable than plastic.
The case can be metal or plastic, the latter option being cheaper, but short-lived and cannot withstand the strong pressure of tap water. However, the metal case is not of the same quality: it is better to give preference to brass, but pressed metal is not much more durable than plastic.
How does it work
The economizer is a simple device that is a water sprayer. According to the manufacturers, it mixes water with air, which gives a higher pressure without additional opening of the tap. There are two types of such devices:
- screen with disk;
- slotted.
A screen aerator is installed in almost every new faucet, it is nothing more than a regular mesh. It consists of a body into which a brass membrane (aka a screen) is inserted, then there is a disk with holes and a mounting washer. Such a device is inserted directly into the tap, it is not visible to the naked eye, as it is hidden inside.
Slotted savers are hung on the faucet or faucet itself, so they are not very convenient to use if the distance from the sink to the faucet is small. The structure of the device is also quite simple. A water jet diluent with holes is inserted into the outer casing, then an element for adjusting the angle of the jet, the base of the aerator and the slotted disk itself.
Additional features
In addition to the fact that the economizer allows, according to manufacturers, to reduce water costs by up to 60%, it is also endowed with other abilities. Most often in advertising they say about the disinfection of the flowing jet with ions, its filtration and enrichment with valuable properties. However, the nozzle is made of base metal, which is not able to make the water either cleaner or healthier. It also contains plastic particles, the healing properties of which are also not scientifically proven.
However, the device also has one pleasant nuance: by shifting the slotted aerator, you can make a regular jet or atomized one.
The device can stay in two positions alternately, so washing dishes or brushing your teeth will be doubly fun. There are also more expensive backlit options. The water will be red or blue, depending on whether it is hot or cold.
