Repair of a crack in an acrylic bathtub price for high-quality repair of a crack in an acrylic bathtub in Moscow
The YouDo website contains information about acrylic bathtub repair specialists. Our professionals are ready to repair a hole in an acrylic bath of any capacity. You will receive high-quality and inexpensive bathroom maintenance services at home. The services of professionals in the repair of acrylic plumbing are in demand among customers, because our performers work without intermediaries and offer affordable assistance.
Our experts are ready to help you even if the damage to the surface is deep enough. In this case, the hole is filled with liquid acrylic, and the resulting surface is treated with sandpaper and polished to a shine.
Crack Repair Sequence in Acrylic Bathtubs
To get rid of cracks that have appeared on the surface of the bath due to mechanical or chemical impact, our performer will perform a series of restoration procedures. The typical procedure for the wizard includes:
- careful cleaning of the surface around the crack so that the putty layer is more securely attached to the walls
- drying the resulting surface
- sealing gaps and cracks with putty
- sanding the repaired area until a smooth surface is obtained
Book your bathroom renovation with us. An acrylic bathtub repair specialist knows all the ins and outs of restoring the bottom and walls of plumbing fixtures. Regardless of the year of manufacture of the model and the duration of its use, you can count on quality assistance.
How to order an acrylic bath repair online in Moscow
YouDo masters professionally repair expensive and budgetary acrylic bathtubs at home. You can find out the features of repairing cracks in acrylic bathtubs after viewing several profiles on the site. Here you will find information regarding:
- timing of repairing cracks in plumbing
- what is the price for the services of YouDo performers who will repair the crack
To enlist the support of our master, you should fill out an application and indicate in it the address where the performer should come. If cracks appear in the bath, then the best solution to this problem is to call a professional at home. From the profiles of our masters you will learn:
- how quickly artists can fix an acrylic bathtub
- can specialists service acrylic plumbing, repair a faucet, mixer
- cost to repair a crack in a large bathtub
Our acrylic bathtub repair specialist will quickly arrive at the address indicated in the task, inspect the plumbing and offer an inexpensive way to solve the problem. The help of our professional will be effective even if the crack is deep.
Additional benefits in cooperation with our performers include:
- the bath service master is ready to provide the service for the cost that the customer will offer
- you can call a specialist in the service of acrylic bathtubs any day of the week
Our executors are professionally engaged in repair, so they will perform the work efficiently and in accordance with the requirements of the customer.
Repair prices
| — | ||
| Steel bath installation | PC. | 1000 |
| Installation of a "standard" acrylic bathtub | PC. | 1500 |
| Installation of a "corner" acrylic bath (with frame assembly) | PC. | 3000 |
| Installing a cast iron bath | PC. | 2500 |
| Hot tub installation | PC. | 5000 |
| Installation of a bathtub of non-standard sizes | PC. | 3000 |
| — | ||
| Dismantling the bath (excluding removal) | PC. | 500 |
| Dismantling the bath (taking into account the removal) | PC. | 1000 |
| — | ||
| Steel bath replacement | PC. | 1500 |
| Replacing the "standard" acrylic bath | PC. | 2000 |
| Replacing the "corner" acrylic bath | PC. | 3500 |
| Replacing a cast iron bath | PC. | 3000 |
| Hot tub replacement | PC. | 7000 |
| Replacing a bathtub of non-standard sizes | PC. | 3500 |
| — | ||
| Leak repair | dot | 1200 |
| Bathtub sealing (silicone) | PC. | 1500 |
| Siphon installation (plastic) | PC. | 800 |
| Siphon installation (copper-brass) | PC. | 1300 |
| Replacing an old bathtub drain (with cutting pipes) | dot | 2000 |
| — | ||
| Removing a simple blockage | PC. | 2000 |
| Removing tough blockages | PC. | 3000 |
Restoration with glass or filling bath
Such a two-component mixture is quite convenient in application, does not have a pungent odor and has increased strength characteristics. Glass spreads itself, a monolithic even film forms on the surface of the bath. At the same time, the stacryl does not dry too quickly, which means that work can be done without haste and fuss.
Step 1. Mix the stacryl with a mixer in a convenient bowl.
Step 2. Add stakryl from a common dish into a small glass and pour onto the top edge of the tub. As soon as the stream reaches the middle of the wall, we begin to move the glass around the perimeter, periodically pouring the mixture into the glass.
Step 3. We repeat the process, starting to pour from the middle of the walls. It is not worth saving the mixture, the excess will merge into a container under the hole, and the coating will turn out to be even and smooth.
If bubbles form on the surface, they can be smoothed out with a plastic spatula or brush.
The polymerization process takes up to 4 days. Exact instructions for proportions and drying times are indicated on the packaging of glass.
| Enamel hardening time Stakryl Ecolor | Air temperature |
|---|---|
| 36 hours | +25 degrees C |
| 42 hours | +20 degrees C |
| 48 hours | +17 degrees C |
When the surface has completely hardened, you can remove films, newspapers, adhesive tape, install a siphon (old or new, at the discretion of the owner) and use the bathroom restored with your own hands.
Repair of acrylic insert in the bath
If an acrylic liner is installed in your bathtub and it has cracked and water has got between the tub and the insert, then this is not a problem! We will remove the water with special adsorbents, fill the voids with a special fast-hardening material and close the crack itself.
It will be almost invisible.
If the liner has become completely unusable and has completely fallen apart, then we can dismantle it without damaging the tiles and walls, clean the surface of your bathtub from mastic, foam and mold and make a high-quality bathtub coating with high-strength acrylic enamels.
Installing an acrylic liner in an old bathtub
It used to be a very good way to extend the life of your old tub, but today it is a very risky operation.
Indeed, acrylic is a very durable material and it is quite difficult to damage it, but now acrylic inserts in the bath are made from low-quality materials that are not very resistant, easily crack, delaminate and are subject to various deformations. On the bottom, such liners have a thickness of only 1.5-2 ml.
which is guaranteed to lead to cracks in a very short time. Repairing an acrylic liner in a bathtub is a rather laborious operation, because you never know what is under it. The crack opens completely and there may be old epoxy, mold, water, and just wet, rotten dirt.
Everything must be dried and degreased and very quickly put a special fast-hardening cement into the crack. Then a nylon or the thinnest metal mesh is applied to the place of the crack, depending on the size of the crack itself. After drying, everything must be puttied, sanded and painted in color.
Melting from cigarettes, improper choice of detergent, damage from falling heavy objects, makes the insert bath difficult to use
The technology of their installation is very often not observed, the process (due to the fault of some masters) is as cheap as possible! Therefore, pay attention to the documentation and conditions of warranty repair.
Recently, a large number of orders for the repair of liners have been received due to cracks and water ingress.
For a greater guarantee, you can get an advertising newspaper 3-8 years old, find the company you are interested in and place an order for it
Attention! Be sure to take the pieces cut from the insert from the master (when installing the strapping) and measure their thickness and you will be unpleasantly surprised!
Dismantling (removing) the acrylic liner
If the acrylic tub liner is beyond repair, we can remove it and refurbish the tub. The cost of dismantling the liner is 1000 rubles. This price includes cleaning the bath from dirt, mastic or foam.
To main
Best Answers
Josef Schweik:
Do not glue anything from the proposed users with high quality (it will not hold for a long time). Repair kits for repairing acrylic products are sold in stores selling sanitary ware (acrylic bathtubs in particular) (they are relatively expensive, not cheaper than 1100 rubles). (type "acrylic bathtub repair kit" into the search engine and get a bunch of results). There is another option (cheaper, but not better): acrylic is dissolved and glued with dichloroethane (solvent for plastics), which is sold in hardware stores (I saw it in 30 ml glass bottles). By the way, dichloroethane is used for gluing plastic models-copies of military and other equipment (each box has a small bottle). To prepare the glue, it is necessary to throw acrylic trimmings into a bottle with dichloroethane (where to get it is another question) of a suitable color and wait until they dissolve until a homogeneous mass is obtained). At the ends of the crack, drill holes with a thin drill (about 2 mm) to prevent it from spreading further. Deepen the crack (remove chamfers along its edges) and fill the resulting groove with the above mass. After drying, repeat the procedure (the mass shrinks) and so on several times. The resulting seam should rise slightly above the surface. After the seam has completely hardened, sand it with an emery cloth and polish it.
P.S. And in order for a crack not to form in the acrylic bath, it must be installed correctly (to ensure rigidity).
Pavel Fedichkin:
maybe try sealant?
Katya Semyonova:
Buy cold welding transparent. 150r. costs. and follow the instructions further. Auto stores are everywhere. Not afraid of water. Will harden into stone.
vnemugI:
I would have made a not deep groove in place of the crack))) ) and would have chosen a stronger glue, for example, epoxy. It becomes like glass when zastvanie and can be polished!
boy:
Personally, I have never seen anything like this in all my activities, no sealants, of course, will work. It would be possible to try with Cosmofen CA-12 glue, but ... only on the back of the liner. Boxitka will not work for the same reason and also because of toxicity.
SAN-TECHNO company:
Cracks in the acrylic liner cannot be removed or repaired in any way. We can consider this an authoritative opinion from the SAN-TECHNO company, which has been installing these liners for more than one year. Cracks on the liners appear in two cases: the first is not the correct installation (found everywhere), the second is the rejection of cast iron (isolated cases). Acrylic is repairable only in case of scratches or small chips. Cracks cannot be repaired!
Crack in the bathroom what to do
Many apartments and private houses have various bathtubs installed, and over time they may develop a crack. What to do in this case, and is it possible to fix it somehow? Or will I have to buy a new bath?
Crack in cast iron or steel tub
Although cast iron is considered the most durable material, it is also subject to corrosion and even cracks. It is very rare that such a problem occurs in a cast-iron bath. And do not be surprised at this, since this material may initially have a defect, which will lead to this problem. This can also be facilitated by the fact that the cast-iron bath is constantly heating up and then cooling down.
There are several ways to seal cracks in cast iron and steel baths:
1. Repair by cold welding
To do this, you first need to drill holes with a diameter of 2-3 mm along the edges of the crack and clean the enamel layer around. It is necessary to take a grinder, put on an abrasive wheel and carefully remove the enamel about 1.5-2 cm around the crack, and make a hole in it (such a hole is not made in a steel bath).
After that, the cleaned place should be degreased with alcohol and hot water should be taken into the bath for half an hour (to cover the cleaned place). And only after the water is drained and the surface is well wiped off, it is possible to seal the treated area with cold welding.
When the sealed place hardens, it must be covered with automotive paint.
2. Epoxy repair
The procedure here is the same as with cold welding. But in order for epoxy to hold better, it must be used with metal powder. If you can’t find it, then you can prepare the mixture yourself.
To do this, a powder is prepared from any metal object with a file and mixed with 1x1 resin, and the cleaned place is sealed with a rubber spatula. A reinforcing fiber is applied on top and a layer of epoxy glue is applied again.
Everything is leveled with a spatula, cleaned with emery and painted.
3. Acrylic insert
This option is the easiest, but not as economical as the previous two. It is necessary to measure the dimensions of the bathtub with a tape measure and buy an acrylic insert. These inserts are currently on sale.
Crack in acrylic bath
In order to repair a crack in an acrylic bath, you will need to buy a special repair kit for this material. To prevent the problem in acrylic from going further, a drill with a drill (diameter 2-3 mm) is taken, and holes are made along the edges of the crack. After that, with the help of sandpaper, the entire place is cleaned and degreased with alcohol. Then the resin is taken from the repair kit and mixed with a hardener - all proportions are in the instructions.
The mixture is applied to the crack, and on top of it is a reinforcing material. It must be pressed into the resin, and a layer of resin must be applied tightly again so that it soaks the material well. If necessary, another layer of adhesive can be applied.
In this way, cracks can be repaired with both epoxy resin and liquid acrylic.
And in order to avoid problems with such a product in the future, it is necessary to carefully care for the surface of the acrylic bath.
Bath preparation for enameling or acrylic application
Although these methods have their own characteristics, the preparation procedure is completely identical. It is necessary to remove a layer of old enamel and achieve maximum adhesion of the future coating with cast iron / steel.
It is necessary to prepare the following materials and fixtures:
- cleaning powder;
- solvent;
- sandpaper on a fabric basis (for example, P24);
- fast hardening polyester automotive putty;
- polyethylene, newspapers and masking tape;
- vacuum cleaner (or wide soft brush);
- grinder + grinding wheels;
- a clean, lint-free cloth;
- building hair dryer;
- screwdriver.
Step 1. We clean the entire surface of the bathtub with a brush and an abrasive agent (powder).
Step 2. We take sandpaper and clean the bath until there are risks from the abrasive. When grinding, it is not necessary to rinse off the cleaning agent. Instead of sandpaper, you can use an angle grinder with a special nozzle. This will greatly simplify the work and speed up the preparation process.
Step 3. After grinding, we wash off all the crumbs and soap film well. We pickle the bath using oxalic acid. Neutralize acid with baking soda.
Step 4. Fill the bathtub with hot water up to the sides. We wait about 10 minutes, open the drain so that the water is glass, and then wipe the bath with a dry cloth. You can warm the vessel with a building hair dryer.So the moisture will soon evaporate and the bath can be further prepared for restoration.
Step 5. We inspect the bath for large defects, potholes. We apply automotive putty, and after it dries, we grind with fine sandpaper. We remove the dust with a vacuum cleaner / soft brush, after which we carefully degrease the entire surface of the plumbing with a solvent and wipe it with lint-free wipes.
Step 6 Unscrew the shower hose. We wrap the spout and taps in polyethylene so that drops of water do not fall into the bath during operation.
Step 7. Armed with a screwdriver, dismantle the drain grate and siphon under the bathtub. Under the drain hole we substitute the dishes into which drops of acrylic or enamel will flow.
Step 8. Seal with masking tape all the surfaces that are adjacent to the restored vessel. We cover the floor, the nearby washing machine, the sink with polyethylene or old newspapers.
Let's start the restoration process.
Restoration. Methods
Restoration can be done in a variety of ways, including:
- application of two-component enamel. The two components are the hardener and the enamel itself. The mixture is applied to the surface like regular paint;
- filling the bathtub with acrylic (glass). After grinding and thorough degreasing, the bathtub is filled with acrylic. After 2 days, the updated plumbing is completely ready for use;
- bathtub-to-tub installation. This method consists in installing an acrylic liner that is completely identical to the old bathtub. The liner is attached with glue or foam and allows you to use the restored bathroom for a long time.
How to Remove Cracks in an Acrylic Bathtub
How to remove cracks in an acrylic bathtub? Acrylic bathtubs have long been competing with their steel or cast iron bathtubs, and if we compare the main characteristics of steel or acrylic bathtubs, the latter have great advantages.
Sanitary acrylic withstands mechanical stress and direct sunlight. Sanitary acrylic is an environmentally friendly material and is hygienic in its composition. The structure of acrylic is not porous, which prevents dirt and all kinds of bacteria from accumulating on the walls of the acrylic bath.
However, in addition to the obvious advantages, acrylic has disadvantages. Cracks can form on sanitary acrylic products. The reasons for these cracks are different, for example, a heavy object falling onto the working surface of the acrylic bath, or the service life has come to an end, and hence the wear of the top layer of the acrylic bath.
If you have a similar unpleasant situation, you can solve it by restoring an acrylic bathtub with your own hands and without large financial investments.
If you encounter this problem and your acrylic bathtub is cracked, there are 3 ways to restore an acrylic bathtub.
1 way
This is an epoxy putty for the restoration of acrylic products (acrylic bathtubs, acrylic trays, acrylic bath liner and crack removal. First of all, you need to clean the crack itself along its edges. This is done using sandpaper (zero grain).
Processing of the edges of cracks must be carried out about a centimeter on both sides of the crack. After that we get a smooth surface. This treatment is necessary so that the putty fills the crack tightly, to the extent possible.
Next, we need a drill. The drill needs to make holes to a depth of one millimeter. Also, holes must be made at the beginning and at the end of the crack so that it does not increase further.
We mix the two components of the epoxy putty and carefully apply the resulting mass on the surface to be restored with a thin layer. Each next layer of epoxy putty is laid in the opposite direction in order to avoid bumps and smudges on the acrylic bath.
Using this method, all cracks on the repaired acrylic product should be repaired.The putty dries completely after twelve hours. Next, you need to grind the place of restoration.
Grinding is done using sandpaper (grain - zero) until the repaired surface acquires perfect smoothness. The use of epoxy putty is suitable for narrow cracks. The width of the crack should not exceed one millimeter.
2 way
This is the use of repair tape to remove cracks in an acrylic bath. Repair tape is used when the crack width is more than one millimeter. As in the first repair method, the first step is to make a high-quality cleaning of the damaged area. And the same procedures for degreasing the surface and drilling holes are done.
So, when the place to be restored is dry, we cut off the part of the repair tape necessary along the length. The tape should be of such length that it protrudes one centimeter beyond the ends of the crack. We remove the protective film from the repair tape and apply the working part of the tape to the repaired surface.
Next, smooth the tape, removing all air bubbles from under it. We are waiting for the complete gluing of the tape to the working surface of the acrylic bath. After carrying out the work, it is forbidden to use the bathroom for at least three hours.
3 way
This is the use of liquid acrylic with a hardener for the restoration of acrylic bathtubs. So, holes are drilled at the ends of the crack, two millimeters deep.
Shallow cracks are degreased and dried. Next, you need to embroider the surface to half the wall thickness of the acrylic bath. After that, the crack is treated with alcohol, and liquid acrylic is poured into it.
First, add a hardener to liquid acrylic. While the liquid acrylic hardens, you should paste over the area of \u200b\u200bthe repaired surface of the bathtub with adhesive tape.
After crystallization of liquid acrylic, the surface to be restored is cleaned with fine-grained sandpaper. Then, carefully polish the repaired place of the acrylic bath.
I decided to share how I restored an acrylic bathtub myself after a bucket of water was dropped into it.
At the bottom there was a crack 10 cm long but shallow. As it is written in the article, I used 1 method. the crack does not increase, but if you look closely, you can see that the bottom of the bath is inhomogeneous. but it does not catch the eye, so you can live with such a bathroom.
Video instruction
Acrylic bathtubs have long been a great alternative to steel and cast iron structures, and, judging by the characteristics, acrylic has a lot of advantages. Such material is able to endure mechanical damage and direct sunlight. In addition, acrylic is environmentally friendly and hygienic, as it has a non-porous structure that prevents the accumulation of dirt and the growth of harmful bacteria.
However, despite all the positive qualities, cracks can appear on acrylic bathtubs. The reasons may be different: falling on the surface of a heavy object with sharp corners, a long service life and, as a result, wear of the product, or the manufacturer simply treated the manufacture of the bath in bad faith. In any case, you can repair an acrylic bath on your own without spending a lot of money.
So, what to do if the acrylic bath is cracked? There are at least three ways to solve the problem.
Enamel application
You can enamel not only a bath, but also a shower tray made of steel and cast iron, a washbasin, a kitchen sink. Both the entire surface of plumbing and individual sections, if necessary, are restored.
This method of restoration is short-lived, but quite economical. A painted bathtub will serve you for another couple of years, after which you will again have to think about painting or replacing it.
Step 1. Open the enamel and hardener. Pour them into a convenient bowl, knead with a mixer until smooth (see the exact proportions on the package).
Step 2With a brush, we begin to apply enamel, making first horizontal and then vertical strokes. Carefully paint over the entire bath.
Step 3. Without waiting for the first layer to dry, apply the second one. Smudges are gently stretched with a brush.
Step 4. Paint over the bottom of the vessel again.
The bath will be ready for use in about 5 days. Until this point, it is advisable not to turn on the water and to prevent dirt from getting on the painted surfaces.
What is liquid acrylic styracryl
A separate type of acrylic called styracryl is designed specifically for repairing damage to acrylic products both locally and completely. The material consists of an acrylic base (the necessary color is introduced into it), as well as a hardener. In the process of mixing the two components, the substances polymerize, the acrylic gradually hardens, forming a high-strength layer of enamel.
Due to the fact that styracryl has a high fluidity, it is distributed over the treated surface in a fairly evenly smooth layer. In addition, the material hardens gradually - delayed solidification allows you to make repairs at home without haste. At the same time, the polymerization time can be easily adjusted by adding more hardener to the composition.
How to repair chips or small restoration of damage to the bath
Sometimes small chips, cracks from fallen heavy objects, scratches appear on the surface. And in this case, there is no need to make a complete restoration, it is enough to carry out minor repairs in the proper sequence.
Previously, such defects were eliminated by mixing glue with tooth powder or applying epoxy to the chip and sprinkling it with porcelain dust. But such methods are extremely unreliable, and it is better to refuse them.
Step one. Ready for repair. To begin with, we apply a rust converter to the chip, wait, wash off the composition with water. Then we clean the chip with powder or dishwashing liquid. Rinse with water and wipe dry.
Step two. Using acetone or another solvent, degrease the defective area. Dry and warm the surface with a hair dryer.
Step three. Using automotive putty, we coat the chip. We wait for drying and we polish with sandpaper.
Step four. We cover the puttied place with two-component acrylic or automotive enamel.
Also, for restoration, you can use a ready-made bath repair kit, which includes acrylic paint, hardener, several sheets of sandpaper, epoxy putty, polish and detailed instructions. The approximate cost of such a kit is from 900 to 1300 rubles.
