Faucets Oras Finland
The rating of the best bathroom faucets would definitely be incomplete without mentioning the products of the Finnish company Oras, one of the leading manufacturers of sanitary ware.
Like Geberit, this company focuses on saving water (touch control) and protection against temperature changes (the presence of a thermostat), however, there are enough traditional mixers in the collections without unnecessary “bells and whistles”
The company presents a wide range of faucets made in various styles, with short, long, high goosenecks, with a hygienic shower and the possibility of mounting on the wall or side of the bath.
Bath faucet Oras Nova 7442X. The cost is 200 USD.
According to user reviews, Oras bath faucets serve faithfully without a single leak for 15-20 years, although a number of users complain about leakage from under a flexible piping, which cannot be replaced by analogues (and there is no branded one for sale).
Prices of Oras Scandinavian products for bathroom faucets start from 40 USD, elite models cost around 700-1000 USD.
The main requirements for plumbing in the bathroom
Plumbing fixtures (sinks, toilets, bathtubs, bidets and urinals) are made from different materials. The price and quality largely depend on the material of manufacture. Let's consider them in more detail.
Porcelain or faience
Outwardly very similar materials, but there is a difference between them. Plumbing made of faience has a wonderful appearance, it has a porous surface, is light and inexpensive. Porcelain looks very smooth, more resistant to temperature changes.
Caring for such plumbing is easier than faience products, since dirt does not clog into the pores. Heavier and more expensive than faience plumbing. The disadvantage of these products is that it cracks easily.
Composite
This material has increased strength, is not afraid of impacts and chemicals, similar to granite. Smooth and shiny material, it requires minimal maintenance. The disadvantage of such products is their high cost.
Marble
Expensive, elegant high-strength sanitary material. But its surface gets dirty very quickly, as it is a porous material.
Glass
New-fangled material, able to create a sophisticated atmosphere in the bathroom, durable, not inferior to faience and porcelain. The downside is that constant care is required, as the smallest stains and streaks are visible.
Overview of manufacturing companies
The cranes of the following companies are considered to be of particular popularity and the highest quality in Russia:
Should I buy German Grohe
The quality of the products of this manufacturer simply has no equal.
The choice of faucets is huge, there are more than two hundred models on sale, differing in design, functionality, material and price. A distinctive feature of the mixers of this company is ease of installation, the presence of numerous additions and modes of operation, as well as high cost.
The price is determined and fully justified by a long warranty period - only here it is at least 10 years.
French Jacob Delafon
Cranes are in no way inferior to the "Germans".
The manufacturer pays special attention to the design of finished products that will perfectly fit into any interior thanks to soft classical forms in a modern European style. All faucets are made of brass - a durable, environmentally friendly and reliable material.
Service life - more than five years.
Finnish Oras
Calm forms and unpretentious design are the hallmarks of this large European company. The emphasis here is on modern technologies, such as the presence of a thermostat, contactless and embedded devices.
The company does not stand still, constantly offering customers new inventions
, which are not inferior in quality to plumbing fixtures from other manufacturers.The only drawback is the material of the products - brass and plastic, which can significantly reduce the service life.
German Hansgrohe
The company's compact faucets are the best solution for small bathrooms. Minimalism in details and European quality guarantee a long service life of the device.
Faucets are ideal for Russian conditions: despite the low quality of water, their service life is more than 5 years, while a presentable appearance will delight residents and guests for a long time.
Russian Iddis
The domestic manufacturer offers high quality products, simple design and very attractive prices. This company pleases customers with budget options, offering more than 100 models to choose from.
. Thanks to the nickel and chrome plating, the service life of the product is several years.
The only drawback is that the company decided to save on the labor of designers, so all mixers have approximately the same, unpretentious appearance.
Spanish Roca
The Spaniards work for glory, offering the plumbing market real works of design art. All mixers are made in a very original way, so they will delight and surprise guests.
However, a beautiful appearance sometimes interferes with the normal functioning of the device, and the service life is reduced.
Bulgarian Vidima
Simplicity, reliability and quality are the main characteristics of the products manufactured by the company. The design of the mixers is not at all important, but the functionality, ease of installation and ease of use are at the highest level here. The choice of models from this company is the largest - at least three hundred different products are put on the market. An additional advantage is the affordable price.
Slovenian Smart
The company produces sanitary ware specifically for the Russian market. The low quality of water has already been taken into account in the production of faucets, so their service life is more than seven years. All products are chrome plated
, feature ergonomic design, simple design, easy operation. Among the most beloved models, single-handle mixers with flexible connections stand out.
Grohe faucets Germany
Traditionally considered the most durable mixers. It is not without reason that the guarantee for the company's products is 10 years, and in most cases the product serves faithfully much longer. When asked about the best bathroom faucet, any plumbing expert will give you an unequivocal answer: Grohe.
GROHE Eurosmart 32467002 basin faucet. Cost — 50 USD.
Grohe faucets are always the most stylish design combined with maximum functionality, the widest range to meet any custom needs and different bathroom styles, this is a guarantee that there will be no problems with sanitary equipment and that they will maintain their original appearance for many years.
Every year, the developers of Grohe mixers introduce new technologies into their products and present new design solutions. Smooth movement of the lever, the most accurate temperature control, ease of installation, saving water consumption - all these are the main characteristics of Grohe faucets. Each mixer of this company is tested for strength and durability before it hits the store shelves.
Of course, the characteristics of Grohe bath faucets also affect the cost of production. Elite models of mixers cost about 1000-1500 USD. However, the company also has a fairly large number of budget options, the cost of which is 50-80 dollars.
Faucets Jacob Delafon France
Having ceded the first places to German companies, the plumbing manufacturer from France is practically stepping on their heels in our rating of bathroom faucets. Jacob Delafon is another big name in the world of plumbing, which connoisseurs associate with harmonious design, long service life and maximum environmental friendliness. The guarantee for the company's products is 5 years.
If Hansgrohe faucets are predominantly minimalistic modern forms, then Jacob Delafon is the classic smoothness and softness of lines, rounded corners, imitating a changeable water flow.
Jakob Delafon faucets are ideal for those who follow traditional, classic solutions in the design of the bathroom in general and plumbing in particular. However, in the collections of the company you can also find models of cranes made in a modern solution.
Prices for Jacob Delafon bath faucets start at 50 USD, representatives of the elite class cost about 400-500 USD.
Faucets Imprese Czech Republic
Among the advantages is also easy disassembly of the faucet for repair and replacement of the cartridge (Imprese faucets are equipped with cartridges from the Spanish company Sedal). The latter, by the way, will cost several times cheaper than a similar product from leading manufacturing companies (it's no secret that consumables from branded companies are very expensive).
The range of Imprese taps is quite wide and is able to satisfy the average consumer. Prices for these bathroom faucets start at $30.
A major overhaul in the apartment involves a change of plumbing. The emergence of new technologies and materials has increased the choice and improved the quality of plumbing fixtures and their components. It is worth remembering that such devices are not purchased for one year, so the convenience and functionality of the living space completely depends on the right choice of plumbing. When choosing it, you should be guided by the following parameters:
- area and layout of the premises;
- material of manufacture;
- functionality and ergonomics;
- features of installation and dismantling;
- pricing policy.
Faucets Hansgrohe Germany
They are practically no different from their main competitors Grohe and are most often mentioned in pairs as a guarantee of reliable and trouble-free plumbing.
Hansgrohe faucets have a stylish minimalist design and look chic in both modern bathrooms and classic interiors. The brand's products are guaranteed for 5 years, but according to user reviews, with proper use and care, these faucets are practically "indestructible".
Hansgrohe faucets also feature the perfect combination of design, functionality and ergonomics. The company regularly pleases with innovations in the field of sanitary equipment, annually releases new models of faucets, including wall-mounted and with a hygienic shower.
HANSGROHE PuraVida 15081000 sink faucet. Cost - 250 USD.
Hansgrohe faucets are presented in a wide price range, the cheapest options can be purchased for 50 USD, but the elite models with maximum functionality and impeccable design cost around 1000 USD.
Faucets Geberit Switzerland
Swiss quality - this characteristic alone speaks in favor of choosing Geberit brand mixers. They have a unique design and maximum durability, they have an anti-vandal design, a thermostat, and the main emphasis in these faucets is on saving water. These are touch (non-contact) and pressure batch mixers that allow you to save every drop of water. They are best suited for public institutions, but they are also good for the home, because they allow you not to think about overspending water.
The materials from which Geberit taps are made are highly environmentally friendly. Mixers are easy to install, durable, silent, ergonomic.
The price of Geberit faucets is quite high, there are no budget models, and this is understandable, based on the characteristics of the products. The price range fluctuates around 300-600 USD.
Toilet selection
The choice of plumbing fixtures such as a toilet bowl is subject to the largest number of requirements. When choosing a toilet bowl, you should be guided by the following characteristics:
- design;
- material;
- method of wastewater discharge;
- flush system;
- bowl type;
- tank.
It would be advisable to choose porcelain and faience devices, which are distinguished by a long service life and ease of maintenance. By design, toilet bowls can be: separate (separate location of the toilet bowl and flush tank), monolithic (single design of the bowl and tank), corner (having a triangular-shaped tank), compact and hinged. The most popular are compact toilets. The location of the drain tank directly on the bowl completely frees the back wall of the toilet room, which allows you to fill this space with the selected water heater.
Of particular note is the method of wastewater discharge, which must be determined before purchasing a toilet bowl. It can be oblique (at an angle), vertical and horizontal.
Toilets can have a cascade (directed continuous flow) and a circular (washing the entire perimeter of the bowl) flush system. The invention of a two-level water drain: full and economy drain, will help control water consumption, which is an important factor for owners.
It is worth noting that the shape of the bowl directly affects the drainage of water in the toilet. The visor bowl has a smooth descent of water at an angle. Funnel-shaped - a steep descent, which contributes to the instant cleansing of the bowl, but at the same time water can splash. The disc bowl is not very convenient due to the spread of odors. There are models that have an antibacterial and water-repellent coating.
The most important quality of the tank is its noiselessness. It is better to choose a tank in which water beats with a fountain, and does not pour from above.
Production material
This parameter of choice of plumbing, as the material of manufacture, plays the main role. The main plumbing devices can be:
- Ceramics, consisting of quartz, sand, clay, kaolin and other components that are pressed and, depending on the technology, fired the required number of times. Depending on the porosity and water absorption, this material can be divided into porcelain and faience. Porcelain products are distinguished by electrical insulating properties, thermal, mechanical and chemical resistance. Faience is characterized by a finely porous structure and a high degree of water permeability, which can be reduced by glazing.
- Cast iron is an alloy of iron and carbon. This material has high strength, corrosion resistance, low plasticity, and its cost is relatively low. The disadvantage of cast iron products is their significant weight.
- The steel most commonly used for kitchen sinks. Water in steel plumbing cools quickly. In addition, the material is prone to deformation and corrosion.
- Acrylic produced by the polymerization of methyl methacrylate. Acrylic sanitary ware is lightweight, highly electrically insulating, easy to maintain and has the ability to retain its color for a long time. The main disadvantages of this material are its reduced strength and problematic processing, as a result of which acrylic can crack.
For complete comfort
With a bidet, which is a small sink or bath attached to the toilet, it's even easier. This little convenience greatly increases the level of hygiene set worldwide. Thanks to him, the bathroom becomes a toilet room.
There is also an option with a bidet cover. In appearance, it is practically no different from a regular seat cover. It is connected to the water supply and two mixers are used in the form of small faucets located on the sides closer to the tank. Water is supplied through the middle through a special tube.
It's hard to imagine any bathroom without heated towel rails. They are made of stainless steel (with chrome or polymer coating, brass). Dryers made of stainless steel have no expiration date, while dryers made of other materials have a shelf life of three years.
It is important to remember a simple rule - always check in the store for visible defects on the products, as this will help you immediately determine the quality level of the selected product if any are found. And it's much easier not to take a damaged item than to take and try to return it back.
The rule of the golden mean in the ratio of price and quality also always works.
Choosing a faucet for the home is very difficult due to the huge number of manufacturers and models. It is necessary that the device has a long service life, fits well into the interior of the room, is easy to install, fully performs its functions, making life easier for households. An important factor is the price of the goods, as well as the ratio of cost and quality. Let's figure out how to choose a good mixer?
Which plumbing company to choose
It is worth noting that when buying plumbing fixtures, you need to pay attention to the pricing policy. You should not save on such products, as possible repairs can be much more expensive.
It is better to choose plumbing fixtures from the same manufacturer and year of manufacture. Also, check the product for damage. When choosing plumbing from well-known companies, it would be advisable to check the availability of relevant certificates and permits confirming the originality of the product.
Italian and French manufacturers, such as Teuco, Jacuzzi, Albatros, are known for their expensive, but high-quality sanitary ware. German plumbing is distinguished by reliability, while Finnish and Swedish plumbing is economical.
In terms of price-quality ratio, such foreign firms as Wisdom, Apollo, Luvisi, Waswmaker, Termolux can be noted. Excellent plumbing will please such Soviet firms as Bandhours, Stroypolimerkeramika, Santek, Keramin, which produce high-quality economy-class models.
More detailed information on all sections can be obtained on our website, both in articles and by downloading a book on how to choose the right plumbing.
Buy a book - How to choose quality plumbing
It would seem a trivial question that can be met immediately, as soon as it comes to changing plumbing in the house, starting with a regular faucet and ending with a toilet bowl. For those who are renovating the bathroom, this issue is especially relevant. Which sink is better to choose? In favor of which to bow - shower or bath? Is a bidet worth it? What shape is better to buy a towel dryer? Lots of questions like these
It is important to find answers to them and put them together in such a way that you get a whole and understandable story that will help you make the right choice and not regret the investment.
Criteria for choosing a sanitary faucet
The algorithm for choosing a reliable assistant in the house differs depending on its direct purpose. The criteria for choosing a faucet are different for the bathroom and kitchen, because the device performs different functions.
Which one to choose for the kitchen
When choosing, pay attention to the following characteristics of the device:
- the height of the gander, on which the convenience of washing dishes depends;
- product design;
- structural stability, no loosening during service;
- ease of installation and repair;
- spout angle.
Which one to buy for the bathroom
When buying a faucet in the bathroom, you should pay attention to such points:
- mounting type: horizontal and vertical;
- device functionality;
- design features, additions;
- mixer design;
- ease of installation and operation;
- gander length.
What materials are better and considered the highest quality
For the kitchen, you need to buy a gold coating or chrome so that the fat does not linger, and the dirt is easily washed off.
For a family with children, a faucet with a thermal protective cover will be an ideal choice, it will save the child from possible burns and skin damage.
When choosing a bath faucet, you need to remember that when in contact with soap and alkaline solutions, white spots may appear on the surface of the device. You also need to decide to decide on the design of the mixers.
How to choose a bathroom
To date, bathtubs are produced in various shapes, sizes and colors. But, the main criterion when choosing a bath is the material from which it is made. Cast iron are popular because of their ability to retain heat for a long time, corrosion resistance and strength. Steel baths are not the best choice due to their low strength and rapid cooling.
When choosing acrylic bathtubs, you should pay attention to the material layer: the thicker the acrylic, the higher the quality and strength of the product. Wooden bathtubs are an expensive frill, as moisture-resistant wood is used for their manufacture.
Modern baths can be supplemented with a hydromassage function combined with aromatherapy, chromotherapy, ozonation, air massage and so on. In addition, such baths can have an automatic disinfection function. But, it is worth remembering that such plumbing "frills" are too sensitive to the quality of tap water. Therefore, for long-term operation of hydromassage systems, it is recommended to install cleaning ones.
A worthy replacement for a bathtub will be the installation of shower cabins, which significantly save consumable water. In addition, such plumbing saves bathroom space, freeing up a significant part of the wall on which, for example, can be installed. The pallet can be made of acrylic, plastic, enamelled steel, cast iron and ceramics, the door unit can be made of tempered glass or plastic with metal profiles. The cabin from above can be covered with a roof or a dome made of plastic. Shower cabins may include additional accessories: a small mirror, shelves for soap and shampoo, handles, towel racks, liquid soap dispensers, and so on. Almost all shower cabins have a control panel for various functions (radio, lighting, fan, and so on).
Expert answers
*-* ViTaMiN *-*:
Most of our compatriots today prefer the trademarks ROMAX, AOXIN, UMT and CERSANIT. Our domestic plumbing is still a little behind the world manufacturers. This is due not so much to quality as to the mentality of people who consider imported plumbing to be better. And I must say that they do it absolutely in vain.
Our plumbing does not differ in appearance from imported analogues, and even surpasses them in quality. Do not forget that plumbing is produced in our country, but it is produced on imported equipment. The combination of our raw materials and world-class technologies gives excellent results and allows our sanitary ware to compete with Western ones.
Dolce Vita:
better take this company Grohe (Grohe)
Stepan Shevchenko:
Vasily Melnikov:
.grohe / good value for money
Adrian:
Take the Czech Republic or Spain ... Make no mistake.
someone Max:
"Ghrone" - not bad enough
Just Oksana:
Russian plumbing
Dmitriy:
what kind are we talking about? it’s not clear)) and so finally there’s nothing to break))))
Michael:
Ghrone, but in general, why break there, everything changes, the main thing is that it doesn’t break often, and for this it is necessary that there be as little plastic as possible, for this, choose heavier - there is more metal
Yaroslav:
Groe and Hansgroe, empirically tested
Vitalban1:
There is no such thing, Everything is on fire And even TANKS. The average life of plumbing is 3-5 years, then you get bored yourself, and you want something new.
Raffich:
Keep in mind all plumbing is done by Chinese basement cooperatives!! Therefore, in order to stumble upon a quality product of a manufacturer that is made at an official factory (it doesn’t matter in which country the product is made, the main thing is at the manufacturer’s official factory), take it in company stores! Go to the plumbing manufacturer's website, enter the brand name in the search, get the manufacturer's website! There are distributors in different countries - then you won’t run into a fake - of course, high-quality global plumbing is not cheap! In my opinion, an excellent well-known company Da mixa is a Danish manufacturer!
World PoKeR Club:
santehnik-home here is a good site reliable quality
Zarabotok Online:
santehnik-home /uslugi-santehnika/plumbing services
Danil Tolstov:
Here you will find everything for yourself ttp santehnik-home /ustanovka-santehniki/
Best Answers
Laura Petrarkina:):
To date, no one can be called a leader company. But we have our own long-standing and well-deserved preferences. For example, the Czech JIKA never left the Russian market. The names of her series Lyra, Dino have for many years been synonymous with comfort and well-being on 1/6 of the land. All the more pleased that lately the good old JIKA has changed for the better. Toilets now have excellent triggers. At a low price, Czech enamel is of high quality, easy to clean with soapy water (powders are excluded!).
Perhaps the only competitor to the Czechs, operating in approximately the same price range, is the Finnish IDO. No design frills, but the company produces a lot of modifications of toilet bowls (Trevi series): for the disabled, with armrests, with multi-channel outlet, repair (with a wide base to block the previous holes in the floor), with the possibility of connecting a sink drain pipe or washing machine.
The Turks are trying very hard to catch up with the Czechs and the Finns. And although VITRA is a long-standing company producing 4 million (!) items per year at an affordable price, it still lags behind. By the way, Turkish sanitary products are not necessarily a characteristic golden border and a bouquet of lilies on the side, but also pleasant laconic forms developed by European and American specialists.
The traditional focus on quality is made by the Swedish concern GUSTAVSBERG. The three main GUSTAVSBERG series are designed for people with different needs: Nordic is the sales record holder in Russia in 1998 due to the ideal price-quality ratio, Arctic is more original, and Scandic is fashionable and modern, which has earned several design awards in Sweden itself.
.ivd /document.xgi?id=3824
Agreement with D.:
Finnish standard
sergey shcherbakov:
elites KLUDI, budget hansgrohe and grohe, economy finns, yugoslavs, turks, for grandma poland belarus russia, further china
Papa Zadov:
Chinese huida)
Faucets Vidima Bulgaria
Focused mainly on the Russian market, and therefore very popular in our country and rightfully taking its place in the rating of bathroom faucets, a manufacturer whose products are reliable, durable, comply with EU standards and are based on German technologies. Warranty period - 5 years.
Vidima bath faucets are not distinguished by originality in design solutions, however, they cannot complain about the scarcity of the assortment, and in terms of durability they are practically not inferior to our top firms in terms of durability. If the primary criteria for you when choosing a mixer are ease of use, design versatility and structural strength - choose Vidima.
The cost of Vidima cranes is from 40 to 200 USD, the products are designed for the average buyer.
Obeying concept
Whatever you place in your bathroom - a sink, a bathtub, a toilet bowl or a shower cubicle - everything should be in harmony, not a single element should fall out of the overall concept.
A bathroom is the same room that requires a thoughtful approach combined with an original design solution. It is not for nothing that interior designers are asked to separately execute the project of bathrooms. This is the place where you can relax and soak in the water jets. The most ideal option is if you buy all plumbing at the same time and in one place. Then you can pick up all the details in combination with each other. When choosing plumbing, be sure to consider the materials from which it is made and take into account their features. In favor are usually easy-to-use and hygienic sanitary products.
Often people are faced with a choice - which is better to buy - a shower or a bath? Here you need to rely on your desires, lifestyle and age. If you are an energetic person who saves time on taking water procedures, then you can opt for a shower cabin. It takes up less space than a bath and allows you to place more furniture. However, if you like to soak in foamy water without haste and maybe even to pleasant music, then the choice in favor of a bath is obvious.All this is easy enough to determine if you live alone. However, if someone else or even a whole family lives in the apartment besides you, you need to take into account the opinion of each of its members.
TOP-10 The best manufacturers of acrylic bathtubs according to experts
A person rarely thinks about buying a bathroom in his adult life: according to the results of surveys of marketers - about 1-3 times, no more.
Therefore, it will be doubly insulting to purchase low-quality consumer goods that can lose their presentation in just a few years of use.
This is especially true of acrylic bathtubs, as the most fragile, compared with cast iron and steel samples of this plumbing.
To avoid this annoying experience, we advise you to take a closer look at our rating of the best acrylic bath manufacturers, which includes the most worthy companies according to experts and consumers who have bought their products.
