Plastic trays, channels, gutters
Plastic channels are a modern and promising version of the drainage system. Today, plastic is a popular material that has found wide application in construction. Its frost-resistant and heavy-duty compositions have proven themselves in the production of elements for drainage systems at sites with a low and medium degree of load on the road surface.
Plastic drainage trays are increasingly used for the arrangement of urban infrastructure. Parking lots, small gas stations, roadsides, parking lots, sidewalks, residential country houses are just a small list of those objects where these plastic systems are successfully used.
The growing demand for plastic drainage trays is due to the following advantages:
- Long service life. Modern polymer compositions make it possible to obtain products with high strength characteristics, resistant to aggressive media, temperature extremes, and ultraviolet radiation.
- Increased throughput. Plastic gutters have a perfectly smooth inner surface. Thanks to this, dirt and debris do not settle on the walls of the trays and the system remains clean for a long time, which significantly saves maintenance costs.
- Lightweight elements. Plastic is lightweight and durable. Plastic trays have fairly thin walls. In general, the design is very light. This reduces the cost and simplifies the transportation of the system and its installation.
- Possibility of connection with sewer pipes of different diameters. The tray has several outlets of standard diameters for connection to the sewer network.
- Simplicity and convenience of installation. Installation of plastic trays does not require much labor. Plastic is easy to process, so the channels can be mounted in any conditions by shortening or trimming the standard elements in place. The design of plastic channels provides for their connection at an angle of 90º.
Properly designed and installed in accordance with the requirements for the magnitude of the loads on the pavement in a particular area, a plastic drainage system will serve for many years.
Plastic channels are more expensive than concrete ones. However, their advantages in installation, maintenance and long service life can save a lot of money. If the amount of load on the coating at your facility is not large, the choice in favor of plastic trays is obvious.
Buying plastic trays at a good price is easy - call +7 (495) 787-24-05 and order!
Tray drainage plastic with a lattice
At any time of the year, on the adjacent plots, as well as on the streets of modern cities, effective solutions are required to prevent the formation of dampness, puddles and stagnant water.
Otherwise, these processes not only have a bad effect on the appearance of buildings and structures, but also significantly worsen their operational characteristics, reducing their service life. A plastic drainage tray with a grate from the Drainage-Shop company will allow you to organize and quickly collect rainwater on the territory.
In addition, they can be used in industrial enterprises to collect conditionally pure substances that are formed during the production process.
Depending on the type of terrain, drainage systems can be implemented in one of the following ways:
- mixed storm drainage - a combined system in which linear drainage alternates with point drainage;
- "stormwater" point type require large cash costs, as well as a significant amount of excavation. The design is a collection of storm water inlets, united by a system of sewer pipes.Mainly used in areas with a simple relief;
- Linear storm drains are the most economical and easiest option for building protection. Suitable for hilly and flat terrain, where it is easy to lay "storm drains" (drains, trays). In addition to trays, the system includes check valves, waste baskets, sand traps, plugs, clamps and other additional elements.
Installation of drainage trays is a very responsible operation. After all, a surface drainage system is laid in a prematurely folded soil, which includes fertile soil and sandy loam. That is, you can not count on a large supporting capacity.
In addition, such soil freezes to a depth of more than one meter, so frost heaving will also affect the supporting part of the tray (a consequence of the expansion of soil moisture during the ice-water phase transition and decompaction of the soil skeleton).
Advantages of our company
- The lowest prices for systems of water disposal. There are individual discount systems for wholesalers.
- High speed of delivery and order processing. You don't have to wait long! Thanks to the excellent qualifications of our staff, you will receive the goods in the shortest possible time.
- The highest quality products. All products, without exception, are certified.
To purchase a plastic drainage tray with a grate in Moscow Region and Moscow, it is enough to leave an application on the website of our Drainage Shop online store. We work seven days a week, so you can pick up the purchased parts for "rainfall" at any convenient time, or order delivery. We guarantee excellent quality at an affordable price.
Storm sewerage of roads, bridges, interchanges
Surface storm drains from roads, interchanges and bridges are subject to removal and treatment. For this purpose, engineering communications systems are used that collect wastewater generated on the surfaces of transport communications, separate the impurities contained in them, after which wastewater is discharged. The company "Flotenk" develops, produces at its own production facilities and installs modern storm sewers for roads, interchanges and bridges, which are highly efficient, easy to operate and maintain.
Advantages of "storm drains" of transport communications from the company "Flotenk"
Storm sewers of roads, bridges and junctions, designed, manufactured and installed by Flotenk, incorporate many fiberglass elements. They are characterized by high mechanical strength, resistance to chemical environments, ease of installation and maintenance. The cost of such systems is low, and their service life is several decades.
Types of storm sewers for transport communications
Storm sewers under the road are closed systems. It incorporates a network of underground utilities, with the help of which wastewater is first directed to a treatment plant, and then discharged either to sewers or to various environmental objects. Mixed type storm sewers are combinations of open and closed "storm drains".
New exit to the Moscow Ring Road from the federal motorway M-1 Belarus Moscow-Minsk
The main elements of stormwater drainage on roads, interchanges and bridges
Almost every modern storm sewer on roads, bridges and interchanges consists of such basic elements as storm water inlets, trays, pipeline communications and treatment facilities. All these components together make it possible to collect, purify rain, irrigation and melt water, and carry out their timely removal.
Reconstruction of Borovskoye Highway
Wastewater treatment plant for roads, bridges, junctions
Treatment facilities for roads, interchanges and bridges are necessary in order to bring the discharged effluents to those conditions that allow them to be discharged. The Flotenk company implements them on the basis of the stepping principle. This means that, first, the effluents go through the stage of separation of solid impurities (sand separators), then they enter the oil and petrol separators. The presence of these devices is due to the fact that traffic inevitably pollutes storm drains roads, bridges and interchanges with various petroleum products (fuel, oils). Coalescent modules are installed in the oil and petrol separators, due to which organic compounds suspended in wastewater are deposited on their surfaces, coarsen and float, forming a film. Additional treatment of wastewater is carried out in the sorption unit, after which the water is discharged to the relief, to reservoirs or sewer collectors.
Design and construction of access roads to the sports and entertainment center and the yacht club
Plastic drainage trays Nika-Shop52
Plastic drainage trays.
Drainage or drainage gutters are the main element of storm sewers. Plastic drainage trays are an excellent alternative to concrete trays. The technical characteristics of the plastic allow the use of plastic drainage trays in almost any facility up to load class E600 in any climatic zone.
The use of plastic trays The use of plastic trays for surface drainage in private construction is due to the ease and speed of installation.
Plastic gutters are also used in the arrangement of parks, embankments, gas stations. For multi-level parking lots, there are special shallow-seated plastic trays.
The availability of plastic storm channels allows them to be used in the construction of any facilities, except for those where the F900 class load is planned.
- Plastic gutters can be connected to the sewer. At the bottom of the tray, a vertical weir flange is provided for connecting a sewer pipe. - The design of the plastic tray provides for the possibility of angular connection of the trays.
- Drainage channels made of plastic have a mortgage bar to firmly hold the tray in a concrete base. - Drainage channels (gutters) are interconnected using a special connecting flange and have a seam to seal the connection. If necessary, these seams can be filled with sealant.
Sealed seams prolong the life of the drainage system.
Performance characteristics of drainage plastic trays:
Plastic trays are light in weight, which simplifies transportation and installation of the drainage system Zero moisture absorption coefficient of plastic trays makes them resistant to high and low temperatures
smooth surface does not trap dirt and debris, plastic trays are less prone to clogging
Types of drainage plastic channels
Plastic trays are divided into the following groups:
- according to the internal section, plastic trays DN90, DN100, DN150, DN200, DN300 are distinguished - according to the load class, plastic channels can withstand loads from 1.5 tons (load class A15) to 60 tons (class E600) - according to the configuration, drainage gutters can be with and without reinforcements. Trays with grids and trays without grids are also available.
Installation and installation of plastic trays:
Storm plastic trays are installed by one person. They are easily joined and stacked, if necessary, a plastic tray can be cut with a regular hacksaw to the desired length.
The operation of a surface drainage system with plastic trays does not require much effort.Canals rarely become clogged, and usually cleaning is needed at spillways.
To clean the entire line of trays, you need to remove one grate at the beginning, middle and end of the line and flush the line with a jet of water under pressure.
Trays drainage plastic, concrete from the manufacturer
Our company is the official representative of the world leader in the production of drainage trays made of plastic, concrete, polymer concrete, polymer sand - the Russian brand Hydrolika! At the moment, you can buy trays with cast-iron, plastic, galvanized steel and stainless steel gratings, sand traps, rainwater inlets, drainage pipes, sewer manholes, in a word, everything you need for arranging and installing a high-quality water drainage system on the site.
Distinctive features of drainage trays
Concrete, plastic, polymer concrete and polymer sand trays are produced in a standard version for urban infrastructure, suburban construction, greenhouses and farms, industrial enterprises and the agricultural complex.
Products are available for systems operating under heavy loads - in areas with high traffic density of vehicles and heavy vehicles.
The use of the latest materials allows our company to offer products that are superior to concrete in terms of basic characteristics:
- strength,
- frost resistance;
- durability;
- resistance to shock loads and environmental influences,
- inertness to chemical reagents;
- weight (when using polymers - superiority by several times).
The design and high accuracy of geometric dimensions are the characteristics of the trays, which, together with the quality of materials, have a decisive influence on the speed of installation and the amount of costs for repairs and maintenance during operation.
We work directly from the manufacturer, and the enterprise (manufacturer) produces all the necessary components and elements of drainage systems (trays, protective gratings, sand traps, drainage wells, drainage pipes, etc.) in combination with a wide range of materials for strengthening and protecting soil.
The whole complex can be ordered in one place and significantly save not only on the total cost, but also on the time when organizing the delivery.
We are the official representative of the manufacturer of water disposal systems
Our company is a reliable supplier with an impeccable reputation. Well-established and well-established supply chains, professionalism of employees provide:
- timely execution of orders;
- accuracy of selection and configuration in accordance with the specialization and field of activity of customers.
Design developments are carried out on individual orders. We help to plan the best option for placing drainage trays on your site, taking into account all the features of the surface, slope, groundwater occurrence, seasonal rainfall and other characteristics.
Installation of road storm sewers in Moscow and the Moscow region
To cope with the volume of precipitation falling on the territory of the capital and the region, the installation of storm sewers and drainage on road sections allows. Neglecting their device, the risk of washing out foundations, paths and blind areas increases. During the low temperature season, roof drains turn into ice, which, as it swells, destroys the foundations of houses.
High-quality stormwater drainage under the road helps to avoid costly sewer repairs and saves budget funds. Our company offers drainage installation services anywhere in Moscow and the Moscow region.
Stormwater for roads
We can present the engineering system in two versions - linear and point. If we consider road spot stormwater, the minimum number of storm water inlets is used there.We carry out their installation under the drainage system of buildings, and then we connect them into a common drainage system. The key elements of this storm drain are sand traps and universal gratings that protect the system.
Linear road storm sewers are complex in design, but more efficient in action. It involves the removal of water from buildings and the surrounding area. Additional channels are connected to the storm water inlets, providing a complex of drainage works.
Drafting and standards
Starting the design and installation of drainage of roads in Moscow, we take into account the regulations. They prescribe the type of sewage equipment for certain routes. The engineering network, like the entire complex as a whole, always meets the general criteria for SNiP.
When the object does not pose a threat to the functioning and life support, partial non-compliance with certain provisions is allowed. For other objects, the requirements are met strictly.
- the amount of precipitation in a given area,
- characteristics of the soil composition,
- the area of the future runoff (the parameter can be calculated by calculating the area of \u200b\u200broofs and other surfaces that do not let water into the soil),
- nearby engineering communications and their planned construction.
With this information, our specialists calculate the approximate volume of water and begin the road drainage in this area.
Arrangement of road sewerage
- hydraulic calculations,
- tracing,
- determination of the main system elements and nodes.
In the process of tracing, the location of nodes and all elements is planned, so that later the water flow can independently drain along a short and free path. The entire territory is divided into pools connected to the sewer. After collecting the necessary information, the road drainage of the highway is planned by our designers. Then the brigade proceeds to the main actions for the construction of road sewerage.
By entrusting the arrangement of stormwater drainage to us, you can be sure of the quality and strict observance of the terms of the contract. We will correctly calculate the storm drain, select certified material, and use innovative technology in our work. All this allows us to give a long-term guarantee and assure that we are the best among competitors! In addition, we offer affordable prices for services and always try to get the job done quickly!
