Pros and cons of weight
pros
In some cases, the large weight of the bath can be a plus:
- A cast iron bathtub is very stable and does not require an additional frame like an acrylic bathtub. It is the weight of the bath that gives it this quality.
- Cast iron cannot be thin, so the weight of the bath is large, but this gives the bath such qualities as the absence of vibrations and noise absorption, so the bath does not rattle from the water, as is the case with a steel bath, and the joints in it do not become loose.
Minuses
But sometimes weight can be a minus:
- The main disadvantage of weight is the transportation and installation of the bath. However, this is done once and in the next 10-25 years you will not even think about it.
- A bathtub cannot be installed on wooden floors in a private house, at least not without additional reinforcement. But again, the problem is solvable, or if the bath is installed in the apartment, it is not significant at all.
Cast iron bathtub Roca Newcast 170×85
What to choose
When choosing a model of a cast-iron bath, you should pay attention to the area of \u200b\u200bthe bathroom and the features of the load on the floors of the house. When buying a small bath, you can not worry
Its weight is acceptable for wooden houses
It is important to pay attention to the depth of the product
Too deep will be inconvenient for the elderly, children and the disabled. The optimal depth for this group of people is considered to be a product with an indicator of 35-37 cm. For an adult, a comfortable depth is 50-60 cm. It is believed that the bath should occupy no more than 1/3 of the room and should not block access to walls or other plumbing.
When buying, pay attention to the surface of the product. It should be even, smooth, uniform over the entire surface of the bath.
The hole in the drain pipe must be compatible with the communications of the bowl. Pay attention to the weight, focusing on the size of the bowl and the approximate requirements for a bath of such dimensions.
Some manufacturers mislead the buyer by indicating the total weight of the bath along with the legs and fittings. This allows you to achieve an increase in the weight ratio and even surpass the performance of similar Soviet baths. However, this is not correct. In addition to size and weight, it is useful for a potential buyer to know the wall thickness of the bowl. If they are 5-6 mm, and the manufacturer indicates the mass of a standard one and a half meter bath equal to 95 kg, this should be the reason for a more thorough product research.
This is interesting: Sitting bath + photo
Manufacturers
To eliminate the risk of buying a low-grade bathtub, the purchase of a bowl of a well-known, consumer-favored brand will allow. There are several such manufacturers.
- Roca (Spain). The bowls of this manufacturer are distinguished by thick walls, have an enamel coating with the addition of titanium, which provides additional strength and non-slip. A standard 150 x 70 bath weighs an average of 73 kg.
- Jacob Delafon (France). The brand is represented by a variety of models, most of them have a depth of 40 cm or more familiar to the Russian consumer. The weight of the bowl varies from 90 to 145 kg.
- Universal (Russia, Novokuznetsk). Products are presented in fonts in several sizes. The weight of the bowls is 90-122 kg.
- Recorder (Portugal). The brand's products are semi-antique, have shapes and designs characteristic of retro style. The weight of the 170x75 cm model can reach 150 kg.
How to install a Roca cast iron bath, see the following video.
How much does a cast iron bath weigh
Since the technology for the production of cast-iron bathtubs has not changed much since the Soviet Union, therefore, we can draw the following conclusion - cast-iron bathtubs from the times of the USSR and Russia - practically do not differ in weight. But this statement does not apply to foreign manufacturers.Therefore, in order to better understand the issues of weight, it is necessary to study the object and its types. The most curious question is how much a cast-iron bathtub weighs.
Classification by type will help answer this question. When choosing a bathroom - the main thing is not to miscalculate with the dimensions.
It is necessary to decide on three parameters, such as
:
- Depth;
- Length (size).
But also do not forget about other selection criteria: cost, design and manufacturer.
Advantages and disadvantages
The advantages include the following:
- they serve at least 25 years;
- resistant to deformation and shock;
- filling with water occurs almost silently and without vibration;
- water remains warm for 25–30 minutes, exactly as long as it takes to take water procedures;
- the enamel remains shiny even when using strong cleaners;
- the cost is much lower than that of acrylic and stone counterparts.
Flaws:
- very large weight, difficulties with delivery and installation;
- a small selection of shapes and configurations;
- the enamel cracks when shampoo bottles and other items fall into the bowl;
- inability to install in old houses due to the threat of collapse of the ceilings.
Large fonts with a length of 180 cm or more weigh at least 120 kg and contain 185 liters of water. Not every floor can withstand such a load, and it is simply impossible to place such a large product in some rooms.
Production of Soviet cast-iron bathtubs
Bathtubs in the era of the USSR were produced by hot casting. Production was carried out in huge blast furnaces directly at the mining enterprises.
The technology looked like this: iron ore was put into the crucible, under the influence of heat emanating from coal, the iron was melted and enriched with oxygen. Then it flowed into a mold, where it was stamped and hardened.
The products turned out to be very bulky and heavy, the weight of the Soviet-made 150 cm cast-iron model reached 150-180 kg.
In the 70s of the 20th century, technology improved. The wall thickness decreased, various additives reduced the iron content. Products "feel better" by 15-20 kg while maintaining the same dimensions, which was associated with the use of new production technologies. Irregularities were removed from the frozen cast-iron base, the surface was polished and covered with enamel. It protected iron from oxidation. But the coating cracked easily when heavy objects were dropped on it and was quite sensitive to the use of abrasive cleaners.
Dimensions of cast iron bathtubs
Cast iron bath
There are several standard sizes of cast iron bathtubs:
- The length of the bath can be 120, 150 or 170 centimeters;
- The width is most often 70 or 75 cm.
Other characteristics that a cast iron bath has may also depend on the size: how much it weighs, wall thickness, etc.
Important: European bath height standards are 40-42 cm without legs, for deeper models - 40-46 cm
Bathtub with handles
In addition to the classic shape, there are also cast-iron figured bathtubs equipped with special handles to increase comfort. To increase safety, special anti-slip notches can also be made at the bottom of such baths.
The modern market offers a wide range of cast-iron baths of various classes and prices. For example, a cast-iron bath of a higher class - the weight may be the same as the weight of a cheaper counterpart, but higher quality enamel is used for coating, which will retain its original appearance for many years.
Useful: There is also a large selection of Chinese knockoffs for European models at lower prices.
Bath dimensions and weights
The approximate ratio of the size and weight of cast iron baths can be described by the following table:
The weight of a typical old Soviet bath measuring 150x70 cm is approximately 94 kg, 170x70 cm - 114 kg.
Foreign manufacturers
Consider the weight of foreign manufacturers on the example of Jacob Delafon and Roca:
Jacob Delafon
Soissons Model
:
- 1500x700 mm / 88.1 kg;
- 1600x700 mm / 90 kg;
- 1700x700 mm / 99.2 kg.
Model Repos
:
- 1700x800 mm / 117.8 kg;
- 1800×850 mm / 134.5 kg.
Roca
Haiti Model
:
- 1500x800 mm / 79 kg;
- 1700×800 mm / 86 kg.
Model Continental
:
- 1500x700 mm / 73 kg;
- 1700×700 mm / 78 kg.
domestic producers
Plant "Universal", Novokuznetsk
The weight of the smallest bathtub of this manufacturer (Caprice) measuring 120x70 cm is 69 kg.
Nostalgia Model
:
- 1500×700 mm / 94 kg;
- 1700×750 mm / 114 kg.
JSC "Kirovskiy Zavod"
Model Prestige
:
- 1500×700 mm / 90 kg;
- 1700×750 mm / 99 kg.
As you can see, the weight of bathtubs of the same size 150x70 cm varies from 73 kg (Roca Continental) to 94 kg (Nostalgia of the Novokuznetsk Universal plant)
Cast iron bathtub with legs Jacob Delafon Cleo 175×80 cm
Advantages and disadvantages of a cast iron bath
Cast iron bathtubs are characterized by many advantages, including:
- Durability. The font can last more than 25 years with proper operation and adequate care, as the alloy is very resistant to deformation and damage.
- Noise absorption. Thick cast iron walls absorb the sound of running water and vibration.
- Sustainability. Considering how much a standard cast-iron bathtub weighs, it is understandable that it is not easy to accidentally turn it over or budge. It can withstand people weighing over 100 kg. There is no need to install a special podium that prevents bottom deflection, as well as to use additional fasteners.
- Heat retention. Sanitary cast iron maintains high water temperature for a long time. The liquid in the bath remains warm enough for 30-40 minutes.
- Ease of care. The surface of the bath is covered with a thin layer of enamel, which repels dirt. The bathroom is easy to clean. Almost any detergent is suitable for this. Enamel retains a noble luster for a long time.
- Affordable price. Cast iron bathtubs are relatively inexpensive - from 12,000 rubles. But you can find exclusive copies for 350-400 thousand rubles.
Disadvantages of cast iron bathtubs:
- Difficulties with transportation, installation and dismantling due to the large weight and large dimensions of the bath.
- Limited number of molds due to the peculiarities of cast iron casting technology.
- Risk of damage to the enamel of the bath due to impact with a heavy object.
- Warming up the metal when water is added to the bath takes a certain time.
A cast-iron bathtub is not a suitable option for old houses with weak ceilings. They may not be able to support the weight of the font, the water filled into it, and the person.
Do-it-yourself cast-iron bath installation video
Part 1
Part 2
If you first need to vacate the premises and you know exactly how much the Soviet cast-iron bathtub weighs, call your friends, hire movers and arrange for removal - this is a separate expense item.
The collection of exhaust systems is carried out separately and is first installed on the bathroom in the drain and overflow. Then the bottom slope is adjusted, which is set to the horizontal level. Only after that, weir equipment is connected to the sewer.
The bath should be completely adjacent to the wall, if there is free space, it is smeared with sealant.
Optimal weight of a cast-iron bathtub video
The result can be summarized as follows - cast-iron bathtubs will not go out of fashion for a long time. Cast iron bathtubs are a tribute to comfort and constancy.
A cast iron bathtub is a great choice for relaxing in the bathroom.
Such a container retains the heat of the collected water well, has excellent stability due to its large weight. It is about the last parameter that it is worth talking about, paying enough attention. After all, many are interested in the question, but how much does a cast-iron bathtub weigh. This is especially true for the most common sizes: 150x70 and 170x70.
The fact is that for many, the significant weight of these products is a minus. Basically, this attitude is caused by difficulties in delivery and installation. At the time of the Union, a standard 150x70 cast-iron bath weighed approximately 120 kg. Now this indicator has significantly decreased due to the use of new technologies in production. Moreover, some foreign samples can compete with domestic ones, overtaking them in weight by 20 kg (down).
However, it is not worth much coveting such models, since they have one significant drawback for our person - a shallow depth, which is about 35 cm.It is not very convenient to fit in such a container.
Popular bath manufacturers
Now that all the nuances with questions about the weight of cast iron baths have been settled, it is worth thinking about the design and manufacturer of cast iron baths. About this and in order.
In the process of choosing plumbing, you may encounter a popular stereotype that imported manufacturers and their products are of better quality and more durable. It should be noted that domestic manufacturers can also offer competitive products.
The list of domestic and foreign manufacturers, as well as the characteristics will be presented below
:
- The plant in Ulyanovsk (Plant Universal OJSC) can offer cast-iron bathtubs at a very reasonable price and of good quality. The brand name of the manufacturer is a three-layer application of enamel, which allows the bath surface to be flawless and serve for a long time in everyday life.
- The next plant - OJSC "Kirov Plant", is considered the very first plant for the manufacture of cast iron bathtubs. Currently, the plant keeps pace with the times and works on the latest technologies. The plant has two main technologies - special enamel with silver, which allows you to disinfect water. As well as German raw materials - production, from which the guarantee of the cast-iron bath is guaranteed for about 25 years.
- Among foreign manufacturers are well-known, such as the Spanish company Rosa and Novial. Italian firm - Artex, Finland - Timo, China - Goldman.
We determine the weight of the cast-iron bath 150 cm
Cast iron bathtubs are divided into types. There are very small cast-iron bathtubs, but they are extremely rare. Small cast iron bathtubs are recognized as bathtubs ranging in size from 120 or 130 cm, 140 cm long and 70 cm wide. Most often these are the so-called "sitting" baths, in which it will be very problematic to lie down. Great option for a family with small children
Such plumbing products are convenient for small apartments, where it is important to save space and space. The approximate weight of a small cast iron bath is 70 - 80 kg
Let's determine the weight of the cast-iron bath 150 cm - this will be the next category. As already follows from the title, we will talk about cast-iron bathtubs with a size of 150 cm, while the width of the bathtub will also be 70 cm. Similar dimensions for cast-iron bathtubs come into view - small. Weight will be approximately 92 to 97 kg. This is the most common type of cast iron baths. Ideal for standard Soviet apartments. In this bath, you can already lie more freely. For people of average build.
The next one is medium. The width of this type of cast iron bath remains standard (70 cm), but the length will be 160 cm. The weight of this type of cast iron bath varies from 100 kg. For people of average height - this model is comfortable and convenient, but this option is more difficult to find.
How to install
This process consists of several main steps:
- The bath must be brought into the room before installation begins.
- With the help of brackets, the parts of the legs are attached, you will also need a set with bolts. The main thing is to turn the bath over in advance so that the lower part is at the top.
- Siphon and drain-overflow structures - installation of fittings is carried out at the next stage. There should be an inlet in the bottom hole. At the lower end of the tee, it is necessary to screw in a disassembled pipe. It is then inserted into the socket at the siphon.
- It is not necessary to tilt the bath itself to the drain hole. But you need to use a level to correctly calculate the levels for the slope. To drain most efficiently, you can adjust the part where the support is located. In addition, it will help to make the bath itself more stable.
- It is necessary to treat with special sealants the places where the bath is adjacent to the wall. The main thing is that it fits as tightly as possible to the wall.
- After that, parts of the sewer and spillway fittings are connected together. A water shutter mechanism is installed on the outlet valve.It is to this part that we then attach the outlet pipe.
Before the operation process begins, it is advised to fill the structure with 5-7 liters of cold water, and then lower them. And only after that you can switch to hot water in normal mode.
The surface of the bath is recommended to be carefully examined not only at the time of purchase, but also after delivery. After all, at this moment you can still refuse the damaged product and ask for a replacement, if necessary.
Cast iron bath in the interior of the bathroom
Enamel chips and cracks on the surface are unacceptable. Fasteners, legs and the bath itself are essential elements in any set. Before paying, you must definitely check how complete the package was sent. For some, the large weight of cast-iron bathtubs can be an advantage, but for someone, a serious disadvantage. It all depends on the specific wishes, preferences and requirements of each buyer. If you do not take them into account in advance, then you can face serious troubles. After all, it is very difficult to replace a bath, it is bought for at least a few years for sure.
Of course, this issue can also be resolved, but then additional costs cannot be avoided. It is better to take into account all the factors in advance, then there will definitely not be any questions and problems. And the bathroom will delight customers for a very long time. Sellers are always happy to consult and talk about the features of a particular product in order to facilitate the choice of their customers. They are ready to offer further maintenance if necessary.
How much does a cast iron bath weigh
cast iron bath weight
cast iron bath weight
What is the weight of a cast iron bath
How much does a cast iron bath weigh
Cast iron bath in the interior of the bathroom
cast iron bath weight
Cast iron bath - original design
Cast iron about the disadvantages and advantages
What are the benefits of such products? There are only a few of them.
- Lightweight and easy care. Enameled coating initially maintains a high level of quality. Therefore, even household chemicals, temperature changes do not harm the coating.
- Manufacturers always give a guarantee for any products. It can be in the range of 3-25 years.
- Water does not make noise during typing, which often affects steel products.
- Water stays warm longer in cast iron than inside steel. But acrylic in this case is the clear leader.
- Due to the serious weight, most of the vibrations that can appear during operation are eliminated. For a person, they are almost invisible, but this is what often becomes the reason why the tightness at the joints is broken.
Still, it is the weight indicator that can become not only an advantage, but also a disadvantage. The design can weigh more than 100 kilograms. Because of this, transportation becomes much more difficult, and loaders have to be paid more.
Acrylic bathtubs can weigh a maximum of 30 kilograms, while cast iron can weigh between 80 and 150 kilograms. In addition, specialty stores do not offer as many shapes and colors as we would like.
What is the weight of a cast iron bath
Learn more about sizes
- 170, 150, 120 cm - the most common length indicators;
- as for the width, it is in the range of 70-75 cm;
Cast iron bath has a whole range of characteristics, which may depend on the size. In particular, we are talking about wall thickness, weight, and so on.
Some more features
There is not only the classic version. You can purchase models in which the design is equipped with additional handles for increased convenience. In addition, there are models with special floor mats to prevent customers from slipping.
Various models of cast iron bathtubs are produced both in class and in cost. At the same time, the materials remain the same, the appearance may be the same. But, for example, in higher-end designs, a better enamel coating is used.It is able to maintain its appearance for many years.
Cast iron bath USSR
the old bathtubs of the USSR produced until the 70s-80s weighed about 200 kg, those that were later already lightened - about 100 kg.
How much does a cast-iron bath 150x70 USSR weigh? VChM, VChM (modernized) and VChM1 (modernized with a mixer), the weight of the cast-iron bath 150x70 cm was 102 kg, the deviation from the norm was no more than 4 kg. VChMO (modernized lightweight) and VChMO1 (modernized lightweight with a mixer), already weighed - 98 kg with the same 150x70.
How much does a cast-iron bathtub 170x75 weigh?
How much does a cast-iron bath 170x75 USSR weigh? VChM, VChM (modernized) and VChM1 (modernized with a mixer) sized 170x75 weighed 118 kg. Deviation up to 5 kg. VChMO (modified lightweight) and VChMO1 (modified lightweight with on-board mixer) - 117 kg. Deviations 5 kg.
How much does a cast-iron bath 180x75 USSR weigh? With a bath length of 180 cm, the weight should have been in the region of 125 kg. Tolerance 5 kg.
How much does a cast-iron bath 120x70 USSR weigh? Sitting baths with a length of 120 cm and a width of 70 cm weighed 90 kg (error tolerance no more than 3.5 kg).
e.g. Cast iron bathtub 150×70 Wagon Classic manufacturer JSC "Plant Universal" (Novokuznetsk, Russia) weight of the bathtub 92 kg
Why choose cast iron bathtubs
Even without going into the advantages and disadvantages of cast bathtubs, you can immediately notice that today they are still widely represented in the segment of expensive sanitary ware from famous manufacturers. This alone suggests that cast iron models have certain characteristics that positively distinguish them from products made from other materials.
It is thanks to these characteristics that massive fonts do not give up their positions now, nor will they do so in the foreseeable future.
Proponents of cast iron baths highlight the following advantages:
- Thanks to thick walls with high heat capacity, they do not allow the collected water to cool down noticeably for a long time. A person taking a bath feels quite comfortable in it for 30-40 minutes.
- They have good sound absorption, which is manifested in the absence of characteristic rattling, as in steel fonts from a jet of falling water.
- Even the smallest modern models of 150x70 cm standard cast-iron bathtubs usually weigh at least 80-90 kg. Such a solid mass contributes to stability, thanks to which they can be mounted without auxiliary supports. After all, it is not for nothing that fonts in the Baroque, Renaissance, etc. styles are often made of cast iron, installed separately without reference to the walls.
- A strong, thick-walled metal bowl provides two benefits at once. Firstly, it does not bend, even without frames or podiums supporting the bottom, if a person weighing over 100 kg gets inside it. Secondly, the non-susceptibility of its body to deformation contributes to the durability of the enamel coating. That is why, with proper operation and careful care, such a font can serve for 25-30 years without significant deterioration in its aesthetic properties.
If your sympathy for such plumbing is based on its above-mentioned advantages, and you are ready to turn a blind eye to the fact that:
- given how much a cast iron bath weighs, certain difficulties may arise with the dismantling of the old product, and then with the delivery and installation of a new one;
- features of its production technologies impose a limitation on the variety of geometric shapes of the proposed models;
- there is a risk of chipping the enamel from an accidental impact on its surface with a heavy hard object. At the same time, restoring the coating to its original form is often impossible;
- stamped steel analogues are several times cheaper;
then you have almost the only option left - to purchase and install a cast-iron bathtub in your bathroom.
How much does cast iron weigh or why is it so heavy
The cast-iron bathtub has been deservedly used for more than a dozen years. Even in Soviet times, its use proved the reliability and durability of cast iron.
One of the disadvantages of such bathtubs is a lot of weight. Cast iron is not a light alloy. Its density averages 7200 kg/m3. Compared to steel, this alloy contains more carbon, which makes it brittle.
This may seem untrue or an incredible fact to you, but cast iron is lighter than steel. Steel has a higher density compared to cast iron - an average of 7800 kg / m3.
Why steel bathtubs lighter than cast iron bathtubs?
The wall thickness of steel baths is half (3-4 mm) than that of cast iron baths - as a result, the total weight of the product is less.
Comparison of the weight of models from different manufacturers table
In the Russian market, manufacturers from different countries offer sanitary ware from economy to premium class. Unfortunately, there are only 3 domestic manufacturers, two of which are located in Kirov and one in Novokuznetsk.
Foreign manufacturers more than pay off the needs of modern customers, the range of which is presented in a wide range of tubs from 1.2 m to 2.0 m in length. They even offer a non-standard width of 90 cm.
You can get acquainted visually with the weight of modern bathtubs, both Russian and imported, with a division by length and width, in the table below. Here are models from the Novokuznetsk and Kirov factories, the Spanish Roca Continental, the French Jacob Delafon, the Finnish Timo, etc.
Unlike Soviet bathtubs, free-standing bathtubs have also appeared in our time (they belong to the premium class). Their weight and cost are much higher than standard ones. They are produced by such companies as Recor, Novial, KALDEWEI.
When buying imported bowls, you need to pay attention to weight. Manufacturers go for a little trick, indicating the total weight of the bath, taking into account the legs and handles.
In the table you can see that the manufacturer Artex, with a product length of 170 cm, claims a weight of 120 kg, which is even higher than Soviet standards. But this is the total weight with additional fittings, the weight of which separately, of course, is not indicated anywhere.
You should not treat a cast-iron bath as an atavism of past stagnant times. Time-tested cast iron sanitary wares are worthy of taking their well-deserved place in a standard-sized bathroom.
If you decide to change the old cast-iron bath, then first weigh the pros and cons. It will be very difficult to find the same quality products on the modern market, and the cost of such a purchase will result in significant waste.
Therefore, before you take the bath to the country or just throw it away, try to give it a second life. It may be worth just inviting an enamel master, and your bath will last for more than a dozen years.
What you need to know when buying cast iron bathtubs
It is necessary to take into account a number of nuances in order to make the right choice.
What size bath should be? It is important to take into account not only the dimensions of the room, but also the personal wishes of the buyers.
If a new bathtub is purchased as an alternative to the old one, one must remember what the weight of the old model was.
What form is needed in this case.
What are the financial possibilities.
cast iron bath weight
Only when choosing it is recommended to specify as many characteristics as possible. Separately, it is worth asking about the conditions under which delivery is carried out. If there is an old bathroom, you need to ask if the store employee can take out the old model.
What nuances should be taken into account
Many buyers believe that cast iron bathtubs are heavy. And for many, this becomes a serious drawback, a reason to think. When choosing plumbing, many factors matter, and the weight indicator was no exception.Cast iron can be molded into any shape, but it can be so heavy that it can be difficult to transport.
cast iron bath weight
Typical designs in the size of 150 × 70 during the Soviet Union weighed about 100-120 kilograms. Currently, such products are produced not only in our country, but also abroad. Such analogues weigh much less. How much does a 170x70 cast iron bath weigh? The difference between domestic and imported developments can reach up to 20 kilograms.
But manufacturers from foreign countries often try to save on material. Including, on its characteristics such as thermal conductivity and strength, overall quality.
The dimensions of bathtubs made in foreign countries are often smaller than we would like. For example, a depth of 35-37 centimeters is often found. For average people, this space is clearly not enough.
Novokuznetsk produces models that have the same weight as in Soviet times. And the depth reaches 45 cm.
Each manufacturer develops its own lineup. Take Jacob, for example.
- REPOSE2915-00: holds 119 liters of liquid, weighs 139 kilograms, measures 170x80;
- PARALLELE2948-00: holds liquid up to 82 liters, weighs 18 kilograms less, dimensions: 170×70;
- MELANIEE: designed for the same 82 liters. Weighs 90 kilograms, dimensions: 170 × 70.
Further, all models go in volume reduction: 88, 82, 85, 80 liters. The minimum weight is 80 kilograms. The dimensions remain about the same.
Are there other important indicators
The bath always affects the materials it comes into contact with. Overloading is not only related to the own weight of the structure. We must also take into account the person who is inside along with the water.
You can calculate the ceiling for a cast-iron bath as follows.
cast iron bath weight
For example, we take a bath weighing up to 100 kilograms. The water in it weighs half of this figure. Inside is a person weighing up to 100 kilograms. The weight of the cast-iron bath in this case will reach 700 kilograms.
We take into account the area of 1.1 meters squared. The support area is slightly larger - almost 2 meters. It turns out that a pressure of about 320 kilograms is exerted on one square meter. If the overlap is concrete, then this value can be called acceptable.
150-200 kilograms - the weight that wooden-based structures can withstand. A cast iron bath can also be placed on a tree, but additional reinforcement is required. Many manufacturers have learned to make bathtubs that are much lighter, while at the same time possessing sufficient strength. The wall thickness is at the level of 1 centimeter, but the heat capacity remains at a normal level.
The most common shape is a rectangle. It is clear that in this regard, cast iron does not give a very wide scope for fantasies and the implementation of design ideas. But you can choose any color scheme, a set of accessories.
From time to time, an update requires the coating of such bathtubs, created from enamel. During operation, chips and cracks inevitably appear on the working surface. When purchasing a bathtub in a store, it is necessary to separately monitor the absence of chips and smudges on the material, places where there is too much color, or it is too bright.
How is the restoration of a cast-iron bath carried out, what is required for this
The enamel coating, despite its stability, can still lose color or deteriorate over time. Especially the quality of water affects the rate of destruction: if it is too hard, the coating will darken faster. Also, the bottom of the bathtub can become rough due to too much use of abrasive cleaners. In this case, it is not necessary to immediately purchase new plumbing - for a start, you should try to restore it at home.
Before starting work on restoration, the old layer of enamel should be removed, which will require a drill with a special nozzle.In its absence, you can use a metal brush. You should prepare for the fact that this procedure will take a lot of time, because you need to act carefully. Before starting work, the area around the bowl must be covered with rags or newspapers.
After removing the plaque, the surface of the bowl must be cleaned of dust particles and treated with a degreasing agent. Then you should fill a full bath with hot water and leave for 10-15 minutes, after which you need to drain everything and wipe the surface dry with sponges that absorb moisture well. For a more thorough drying, you can use a regular hair dryer.
In the process of restoring a cast-iron bath, you can choose any color of enamel
The final stage is the restoration of the coating. During the restoration process, it will be necessary to apply 4 layers of enamel. Each subsequent layer is applied only after the previous one has completely dried, so that unevenness does not result. Only after applying the fourth layer, the repair is considered complete.
It is important to note that during the restoration process, you can choose any color of enamel, but the shelf life of the new coating will be only 2-3 years, because in terms of quality it cannot be compared with the factory application.
Cast iron bathtubs, due to their durability and attractive appearance, will not lose their relevance for a long time, even despite how much they weigh. The large weight of the product is considered a problem only during installation, and then, on the contrary, it plays into the hands of the user. If you properly care for the product and monitor the integrity of the enamel coating, you will need to change the bath very soon.
Conclusion
The weight of a cast-iron bath is not such a big problem, which, however, is solved quite simply, but it also has undeniable advantages. However, the choice is yours, especially since at the moment it is simply huge!
Quick answer: depends on the size of the tub itself.
It is believed that cast-iron bathtubs are something from the Soviet past, when the average consumer had no real choice. Today, most buyers prefer to purchase bathtubs from other materials - less heavy and much cheaper.
However, this should not be surprising, because such a bathroom has a number of advantages.
Firstly, it is the durability and phenomenal strength of this bathroom item.
Secondly, the service life of such a bath is virtually unlimited and it all depends on how you take care of it.
Thirdly, cast iron keeps the water temperature at the same level for a long time, preventing it from cooling down.
There are only two disadvantages: high cost and weight. Let's talk about the second parameter in a little more detail.
As an example, consider the most popular versions of cast iron bathtubs and find out how much they weigh. The first digits are the length/width, the second digits are the weight.
150×70 cm: 80-90 kg.
160×70 cm: 85-95 kg.
170×70 cm: 95-110 kg.
150×75 cm: 90-100 kg.
160×75 cm: 95-105 kg.
170×75 cm: 110-125 kg.
150×80 cm: 100-110 kg.
160×80 cm: 105-115 kg.
170×80 cm: 125-140 kg.
These are approximate data, since the final weight depends directly on the model of the bath that you mean.
