Expert answers
Petrovich:
1) In addition to the rubber cuff, there must be a plastic ring. Which prevents strong compression of the gum when twisting. 2) When assembling, it is necessary to lubricate with plumbing grease, this is done so that the rubber band and pvc ring slide inside when the gander is turned.
Cat smile:
Clean, finally, the spout of the gander itself. Probably - the mesh is clogged and the water simply has nowhere to go - how to overcome all the gaskets and splash on your apron))
FILIN-VP:
for good, the place on which the rubber ring-gasket “rides” must be polished, plus use the high-quality gasket itself, then it will last more or less for a long time, and there is something to eat. I somehow made a couple of turns of the FUM tape on top of the gasket ring and put a gander with it, it worked for a long time and successfully!
Dr. Burns:
replace the gasket - business then
Andrey Guguchkin:
Single mixer?
Can't find the fire?
To change the gaskets, it is necessary to unscrew the threaded sleeve with an internal hexagon, and then screw it back; It starts to leak if this very sleeve is poorly screwed - it is unscrewed.
A.D. (do not offer cologne):
For me, the answer is clear: buy a new faucet, because none of the above will help. And I installed new ganders, and changed the cuff - the gasket, and reeled it up with a fumkoy tangit ... 1/2 inch thread to screw the hose with a watering can. So the mixer can still come in handy :-)
baker:
well, as it were, these rubber rings are different both in diameter and in thickness ... you should take that very first gasket to the store as a sample ... but you probably already threw it out ... then by trial and error, select the optimal
Vladimir Petrov:
On the bottom of the tap, two slots are visible for unscrewing with a key. Take an adjustable wrench or horns in size and carefully unscrew
DN Lions:
Do you see the stitches? Water with a key for them and unscrew.
Ho Min Yu:
You take a wrench and twist it. Spray with water first.
Alexey Kuznetsov:
gets out. but if the crane is silumin, then it will simply fall apart
Best Answers
Tatiana Cherkasskaya:
It's not a woman's business, you need to call a plumber
Natalya Mikhailovna:
Are there any threads and washers? If it's broken, just change it.
Alexander Tsenov:
A good one cannot be torn off, it fell off by itself.
Practical Logic:
How much of a fool are you? ))) Let's go work as a railway worker)))
Pirate Pirate 2013:
Ask a neighbor to take a look.
Russin Sibirak:
new buy
Granny:
He screwed up. Look carefully at the place where he fell off. if everything rotted and fell apart on the faucet itself, then go to the store, buy the same faucet and screw it on. If you just unscrewed, then screw it back.
R.B.:
I can also... Well, that is, the quality of such Chinese cranes .... need a man who understands)
Just love:
male optional. There's a screw at the bottom, unscrew it, take off what's left of the gander and go buy a new one. Do it all in reverse. Not difficult.
Olga:
new buy
Valery Dontsov:
A neighbor can not only look, but also repair and clean ...
Real McCoys:
Serviceable ganders do not fall off just like that. Or rotten already or poor quality. I advise you to install a high-quality mixer, for example, Germany, like ours - here is such a model .dlyavann /item/smesitel-dlya-kuhni-grohe-costa-l-31831 For almost a year nothing has broken, fallen off, or leaked. That's what European quality means.
Nikolai Potafeev:
We urgently need to find a normal man, he will screw it up and explain.
Bogdanich:
options: a) the nut is unscrewed. Stick it in place and tighten it harder) the plastic split ring under the nut broke.Replace and brethren) the silumin sleeve has scattered (a very common case). Buy a new GOOD faucet
