Which stove is better for a bath

The best stainless steel bath stoves

Termofor Tunguska

A great copy that is also not very expensive. This oven very quickly heats up a steam room up to 18 m3. The heater available here warms up from all sides - this is the key to efficiency.

Advantages:

• Suitable for a Russian bath of any configuration;
• Gives out fine steam;
• Very fast heating;
• The volume of the firebox and heater will suit everyone;
• Adequate cost;
• Very easy installation.

Flaws:

• Design - for an amateur;
• Cools down very quickly.

The main advantage of this model is very fast heating. The trouble is that it cools down very quickly. Reviews on Termofor Tunguska indicate that one must not forget to throw firewood into the firebox, otherwise it can quickly cool down.

However, its 60-liter volume allows you to do this not too often. The room is heated by this furnace due to the casing-convector, which creates a powerful stream of hot air.

Termofor Geyser 2014

Another worthy stove designed for the Russian bath. For its production, heat-resistant alloy steel was used. Vaporization here is two-stage. This means that the stove creates heavy steam, which is dried in the second compartment, after which it goes into the steam room.

Advantages:

• Light and pleasant steam;
• Good appearance;
• The heater holds 70 kg of stones;
• Combined fuel;
• Optimal price tag;
• Very fast heating;
• The case turned out to be very reliable.

Flaws:

With intensive burning of firewood, a rumble is heard in the chimney.

Much more important is the fact that the stove can boast a long service life - it is possible that it will outlive the bath itself. It is capable of heating a room up to 18 m3 - this is quite enough for most owners.

6. Harvia Legend 240 Duo

The Finnish manufacturer has been working in this field for 60 years and now shows a very decent result. Harvia Legend 240 Duo is distinguished not only by its attractive appearance, but also by its high-quality device. The large stone compartment holds up to 200 kilograms. This stove is suitable not only for the Russian bath, but also for use in the sauna, because it can produce high temperatures, while leaving the humidity at a low level.

Very often, the premises allocated for the steam room are small in area. However, the innovations that were used in the design of the furnace allow you not to worry about fire safety when installing it. Items in the steam room can be located depending on the desire of the developer. The large volume of the heater compared to analogues is also an advantage. Firstly, it allows you to get a large amount of high-quality steam. Secondly, you can lower the temperature without losing the amount of steam. This can help people who are contraindicated in the bath because of the high temperature.

pros

• Large compartment for stones.
• Rapid heating of the room.
• Lots of steam.
• High quality material.

Minuses

It is possible to add a tank, but it must be purchased separately.

Vladislav, 56 years old.

I bought the stove a year and a half ago. Very happy with the purchase. When I first installed it, I was surprised that there was a lot of free space left in the steam room. Of course, I saw that the oven was compact, but I did not think that it was so. However, steam quality and heating time are not affected. Approximately 30-40 minutes is enough for the steam room to warm up to 80 degrees. Steam is light and pleasant. And the design is nice too.

Advantages and disadvantages

The main advantage of stoves made of cast iron is that the walls of such units are more than 10 mm thick, which means that such a bath appliance will accumulate heat much better, retain it and give it away longer than its steel counterparts.A cast-iron stove for a bath will provide a gradual, smooth heating of the steam room and will allow you to save firewood - an expensive fuel.

High heat resistance and thick walls of the heater also have a positive effect on its durability. Cast iron walls are not subject to deformation under the influence of high temperatures, which means that the unit will serve you for many years, its service life is much higher than that of steel.

The corrosion resistance of cast iron is simply brilliant, unlike steel, it does not rust even in a room with sharp temperature fluctuations and high levels of humidity.

Modern cast-iron bath appliances are made by casting, carried out according to the tenon-groove principle, or using sealants. The absence of welds also has a positive effect on the quality, since very often, due to non-compliance with the technology, it is the joints that become the most vulnerable points of the heater.

Another important point: cast iron is a chemically neutral alloy, which means that oxygen in the room will not burn out during the operation of the furnace.

Cast iron stove for bath Vesuvius SKIF

In fairness, it should be noted that products made of cast iron still have drawbacks. First of all, this is the high cost of such units and a large specific gravity, which means that for installing a furnace, an indispensable condition is the need to equip a foundation for it.

Many modern manufacturers, in an effort to reduce the cost of their products and make them more competitive, offer consumers combined options.

In this case, the furnace part of the unit is made of heat-resistant cast iron, and the outer casing is made of stainless steel. Such specimens have proven themselves well, but those who are accustomed to the “broom” steam still remain adherents of brick or cast iron stoves.

The best companies for electric sauna stoves

Electric sauna stoves undoubtedly have several major advantages: they are environmentally friendly, easy to operate, fireproof and, most importantly, do not require the use of additional constructive measures to remove combustion products. Therefore, despite the fact that a wood-burning stove is considered a traditional option for a Russian bath, electric devices in the steam room are becoming more and more popular. Their compact dimensions, the possibility of wall mounting and other nice options attract not only owners of small saunas, but also owners of full-sized steam rooms in a country house.

Although most of the major manufacturers of sauna units usually have several electric heaters in their assortment, the most popular electric sauna stoves on the market are made by specialized companies. This is due to the fact that the design principles of heating devices using the principle of fuel combustion are radically different from the approaches to the development of electrical devices.

The best companies of steel sauna stoves

If cast iron is a material from which only wood-burning stoves are made almost exclusively, then stainless and structural steel is a universal option for all types of bath units - electric, gas and solid fuel. Although steel furnaces are less durable than cast iron ones, modern metal processing technologies make it possible to produce quite high-quality furnaces with excellent characteristics, while differing in budget price and relatively low weight. Most of the well-known Russian manufacturers of steel sauna stoves offer the consumer a large range of models and the opportunity to choose the type of fuel: wood, coal or gas.

4. TMF Geyser 2014

Quality products. The stove is ideal for a Russian bath. The walls are not as thin as in the previous model, due to which the term of high-quality work increases. To obtain light, high-quality steam, a two-level system is used.A similar tool is used in the "Angara". Heavy steam first passes into the first compartment, then moves to the next, where it receives the necessary lightness. The unique design will also not leave anyone indifferent.

High quality steel ensures a long service life. There is a funnel for water supply. A limiter is installed on it, with the help of which it will be possible to avoid excessive water ingress on the stones. True, for a large room you will need a different stove. This model is designed for heating 8-18 cubic meters. According to customer reviews, we can conclude that the oven requires attention.

pros

• Fast heating.
• Light steam.
• High quality steel.
• Perfect design.
• Large compartment for stones.

Minuses

• Not suitable for large rooms.
• There is noise in the chimney when burning a large amount of firewood.

Dmitry, 40 years old.

I am satisfied with the purchase. First of all, I would like to evaluate the quality of the steam. When I bought, the seller said that the steam would be light, but I could not even imagine how much. All in all, a great couple. The stove is also comfortable. Previously used a different model. When I bought stones, I bought them out of habit, there wasn’t enough, I had to buy more. However, this number of stones is only a plus. The steam room heats up quickly, literally 30-40 minutes, although the volume is not very large. Looks nice too. Haven't noticed any cons yet.

3. Hephaestus PB-03

Completes our rating of the best stoves Hephaestus PB-03. This oven is fundamentally different from the previous one in terms of its heating capabilities. It can bring to the desired temperature a room up to 45 cubic meters. Thick cast-iron walls give the stove massiveness and volume. Due to this thickness, the service life automatically increases, since it is very difficult to damage or burn them out.

Lovers of high temperatures will love it. Excellent oven. The efficiency is 90%. This is much higher than other models. The room warms up quickly. The vapor quality is also excellent. It is very light and not dry. Retains heat for a long time. So you can take a steam bath at your pleasure, without worrying about throwing firewood for a long time. The only thing that can influence the choice of this furnace is the weight. With a basic content, the weight is 350 kilograms, so the floor in the bath must be strong and preferably reinforced. The furnace will show the best result if it is lined with refractory bricks, which will also affect its heating time.

pros

• Reliable construction.
• High efficiency.
• Heat is retained for a long time.
• Suitable for heating large rooms.

Minuses

• Impressive weight.
• High price.

Vladimir, 56 years old.

The best sauna stove I have ever seen. When buying, I tried on for a long time, the price scared me away. However, he did not regret the cost. The steam room heats up very quickly and it is pleasant to bathe. True, I had to strengthen the floor in the bath, because I did not count on such a giant.

3 Helo

Most efficient ovens Country: Finland Ranking (2019): 4.7

Helo, one of the oldest companies in the world producing stoves for baths and saunas, prefers not to stop there. The group's engineers are constantly looking for innovative solutions to improve user comfort. For example, the exclusive Saunatonttu model has a design that allows, with a large mass of hot stones inside, to ensure complete safety for users and especially soft steam due to effective insulation of the body. At the same time, the energy consumption of the furnace is one of the lowest in the class. The only drawback is the high cost.

But among the company's proposals there are also more budget solutions, which are distinguished by consistently excellent quality and comfort in use. The classic series of electric heaters provides customers with a wide selection of sauna devices. There are compact stoves for mini-saunas, and solid appliances with a power of up to 9 kW. And, of course, various options for thermostats, timers and control panels are available - from simple mechanical to touch.

3 Ermak

Modular design of furnaces Country: Russia Rating (2019): 4.7

The main advantage of Ermak bath units is their modular design. The classic series involves hanging additional modules only on the rear wall, and the new line (Modifications "Standard", "Premium" and "Lux") allows you to attach optional equipment on two sides. The list of such modules is quite extensive: at the request of the buyer, a heat exchanger, a hinged water tank, a stone grid, a steam generator or a convector screen can be added to the basic design of the furnace.

Another interesting modification of Ermak bath units is a universal gas-wood-burning stove. The design of the popular Uralochka model allows you to install either a gas burner or a door in case of using firewood. The factory warranty on the furnace is valid for up to 5 years.

2. Bystrica

The second place is occupied by the Bystrica oven, a high-quality Russian-made product. It is optimally suited for a Russian bath, it warms up rooms up to 18 cubic meters as quickly as possible.

The stove adequately fulfills not only its immediate task, but will also become a real decoration of the interior of the steam room thanks to ceramic cladding, aesthetic appearance in a minimalist style.

The design of the stove is designed in such a way that heat flows spread evenly throughout the steam room, including the floor. For this, a convector is provided, which also provides an optimal level of humidity in the room.

The hearth of the furnace is made of a new seamless steel pipe with a thickness of 8 mm. The back and front walls are also made of high-strength steel and have a thickness of 5 mm.

Another feature of this model is its versatility. That is, the design of the stove allows you to additionally equip it with hanging tanks with a volume of 60-90 l, a removable closed heater, a stone mesh on the back wall, a mesh on the chimney, a heat exchanger for heating water, a furnace portal, which is adjustable in length and facilitates installation.

All parts of this furnace are assembled on special machines, there are no butt welds in it, only semi-automatic welding is used. In addition, the product is equipped with an adjustment of the intensity of burning firewood, for this a gate valve and a convenient ash pan are used.

pros

• Pleasant and mild heat;
• Uniform distribution of heat flows;
• Versatility;
• Two installation options (firebox from the steam room, current from the dressing room);
• Aesthetic appearance;
• Fast warm-up;
• Durability and practicality;

The best cast iron stoves for the Russian bath

Cast iron stoves have a lot of adherents. Although they take longer to heat up, the heat is retained better. Here are the best representatives of this category.

Hephaestus PB-04 M

True connoisseurs of the Russian bath prefer cast iron stoves. Model Hephaestus PB-04 M is made from a special grade of cast iron with a chromium content. Thanks to the remote portal, the firebox can be in one room, and the heat-resistant door in another. Since the oven is delivered unassembled, there will be no problems with transportation and unloading

Experts pay attention to the innovative design of the firebox. It has a gas afterburning system, a flame arrester and turbulent fins.

As a result, even when the furnace compartment is heated to 750°C, the exhaust gases enter the chimney after cooling down to 300°C. The furnace efficiency reaches 87%.

The model becomes the winner of our rating also for the record wall thickness (6 cm), so the heat is retained in the oven for a long time. Complementing the picture is the artistic framing of the door.

• long service life;
• high efficiency;
• unique firebox design;
• artistic framing of the door.

Flaws

not detected.

Vesuvius LEGEND FORGING 28 Fireplace (205)

A worthy competition to the leader of the rating is created by the Vesuvius cast-iron stove LEGEND FORGING 28 Fireplace (205). It can work in a bath with a steam room up to 30 cubic meters. m.Externally, the model looks elegant, there are no problems with transportation and installation. The cast-iron firebox is divided into 3 parts; the manufacturer used a ceramic cord for sealing. The safety and reliability of the design is ensured by the bolted connection of assemblies and parts. A special grade of cast iron withstands strong temperature fluctuations, it does not burst when a large amount of water hits it.

The stove takes the second place in the ranking due to the higher price and the thinner walls of the firebox (1.2 cm). In addition, the design has more weight (178 kg) and dimensions.

Flaws

• big weight;
• high price.

Attention! This rating is subjective, is not an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist

7. Vesuvius SKIF STANDARD

This oven also does not have sharp corners. This appearance allows for a more even distribution of the generated heat. 2 models from the manufacturer are presented: with an open and closed heater. If you need a Russian bath with high humidity, it is better to limit yourself to a closed type. However, if you want to look at the stones live and splash water on them, you will have to install additional tools to increase the humidity of the air and make the steam lighter.

All stoves from this manufacturer have specific shapes that will definitely be remembered by visitors to the bath. There are a large number of types of "Scythians", so it will not be difficult to choose the necessary stove for the volume of the room

Also, special attention is drawn to the door for firewood, which can be made in both classic and glass style. Possibility to connect a hot water tank

However, it should be borne in mind that the standard package does not include this add-on, so it will have to be purchased separately. Fortunately, the same manufacturer can find several types.

pros

• Quality material.
• Original design.
• It is possible to add a tank for heating water.

Valery is 32 years old.

Bought this oven 2 years ago. At first I was pleased with everything, but after about six months I began to notice the minuses. Firstly, the chimney quickly becomes dirty, which is why you have to clean it very often. I can't find the reason. Carefully cared for the cleanliness of the chimney, regularly cleaned it. Secondly, after prolonged use, it becomes increasingly difficult to clean the glass on the firebox door. Again, I used special cleaning products, but they no longer help. In general, the first six months - a year is a pleasure to use, but then problems arise.

1 Harvia

Best Selling Country: Finland Rating (2019): 5.0

Although the Finnish company produces not only electric stoves, it is the network-operated heaters of this brand that are most popular in our country. They provide smooth heating, are economical and are available in a wide range of capacities and designs. Excellent workmanship, creative design and reasonable prices are three reasons why Harvia electric ovens are top sellers in Russia.

One of the most successful lines of sauna stoves from this manufacturer is the Cilindro series. Due to the large weight of the stones, you can get the optimal amount of steam. There are models for rooms from 10 sq. m to 18 sq.m, you can choose the option with a built-in or remote control. Fuga ovens with soapstone also deserve attention - thanks to their closed design and large surface area of ​​the stone, they are especially good for small rooms.

Attention! The above information is not a buying guide. For any advice, you should contact the experts!

1 TMF Termofor

Best Functionality Country: Russia Rating (2019): 4.9

This company especially emphasizes its geographical position, giving the definition of its products: "Siberian stoves, boilers and fireplaces."The traditions of the Russian bath are especially strong beyond the Urals, so it is not surprising that one of the best manufacturers of wood-burning sauna stoves is based in Novosibirsk. The whole variety of thermal units of the company can be divided into two large groups according to the material: stoves made of stainless steel have the word INOX in the name, and anti-crisis devices are made of improved structural steel and are marked CARBON. Each popular model of the company - both the ultra-compact Osa, and the Geyser with a two-stage steam generation system, and the powerful Tunguska XXL - is available in two versions, classic and budget.

Although TMF specializes primarily in traditional wood-burning sauna stoves, in the past few years, in response to the wishes of customers, the company's engineers have developed two limited ranges of more modern heaters, powered by electricity and gas fuel.

4 Polytech

Best prices Country: Russia Rating (2019): 4.6

Electric sauna stoves manufactured by the Russian company Polytech have been on the market since 1990. Many models of traditional heaters from this company have thus been in operation for 15 years or more and have earned a reputation for being reliable and trouble-free. Heating elements of our own design do not allow oxygen to burn out, thanks to the correctly selected temperature regime. The company's line includes electric furnaces with power from 3 to 36 kW, almost all models can be connected to both 220 V and 380 volt networks.

Reasonable pricing policy of the company determines the high popularity of heaters "Polytech" among buyers. In addition, these devices are maximally adapted specifically for the Russian bath. The most famous models, the design of which has been tested over the years of operation, are the line of classic electric stoves for the Christina bath. A new development of the company's engineers is the "Exclusive" series, which uses a large mass of stone. A particularly successful model of this type can be called the Stone Flower stove - it not only provides a high heating rate, but also has a truly original, memorable design.

Which stove for a bath is better steel or cast iron

Furnace type	Advantages	Flaws
Steel	+ high reliability + long service life + during combustion, the metal does not oxidize + heats up quickly	- not every stainless steel has high performance characteristics - price fluctuates a lot - cools down quickly
Cast iron	+ stays warm for a long time + withstands changes in temperature and humidity + reasonable price	- big weight - short service life - slow heating

8. Varvara Terma - Kamenka

Nice sauna stove. It is suitable for people who like to experiment with the purpose of the device. The standard equipment does not include a tank for heating water, however, if necessary, modification of the model is allowed. You can also change the position of the tank, setting it even on its side. You can also use this stove as a boiler for heating. In this case, batteries with water heating are connected to it.

The volume of the hot water tank in this case can reach 60 liters. Such dimensions help to obtain a sufficient amount of hot water without spending more time on heating it. The volume of the steam room, for which heating this stove can be used, can reach 24 cubic meters. The dimensions of the heater are also impressive, while the weight of the stove itself can be about 70 kilograms.

pros

• Convenient installation.
• Profitable price
• Easy to use, no additional tools required.

Minuses

• It may take longer to heat up the hot water tank than other models.
• Perhaps the appearance of condensed water droplets with their subsequent flow down the pipe.

Victor, 53 years old.

I have been using this oven for about 1 year. I didn't notice any major downsides. The only thing is that you have to clean the chimney about 1 time per month, otherwise the draft starts to deteriorate. Satisfied with the quality of the pair. The steam room heats up for an hour on average. Firewood does not take much. The overall impression is positive, so I advise all lovers of baths to purchase this product.