Which toilet to choose
A sign that tells which toilet to choose is whether this design has splashes and splashes of water.
Current systems assume that the toilet bowl is funnel-shaped, unlike older models equipped with a shelf. Today's form is convenient and significantly saves water for flushing, and in general is more hygienic. However, it contains an important drawback, which is expressed in an abundance of splashes and splashes.
To understand which toilet flushes better, you can find out what forms of the toilet bowl are.
So, there are three types of toilet bowl shape:
- vertical (funnel-shaped). In this embodiment, the drain hole is right in the center of the bowl;
- with a shelf. This form contains a number of bad qualities, including splashes, splashes, excessive water consumption and a low degree of hygiene;
- with a slope (the slope in most cases is closer to one of the edges - back or front);
Anti-splash system
The anti-splash system is necessary in order to eliminate unwanted splashes after penetration into the toilet bowl of products of activity. This system is implemented by a special geometric shape of the drain hole.
This form will ensure the absence of splashes, in which the drain hole is narrowed to the maximum, located closer to the bottom of the structure and has an offset to one of the sides, and the main thing is that the water level in it must be as low as possible. The cycle must follow the contour of the hole.
Designation of the height of the water column in the hole for draining the toilet
It is already known which toilet to choose, based on the shape of the bowl, and that the water level in the drain should be as low as possible. You can figure out what this level will be at the step of buying a toilet bowl only with the help of knowledge of the theory of physics, because no one will connect the water in the store.
The water level in the toilet bowl will be suitable for the height of the lower point of the drain outlet of the structure located on the outside. Mentally drawing a line from this point, you can see the level of possible filling of the toilet bowl with water.
Drain system selection
Knowing all the previous selection conditions, it is already clear that how the drain is performed is also of great importance for the presence or absence of splashes and splashes. The drain system is of the following types:
- horizontal way - draining is carried out along the back wall of the toilet bowl. The disadvantage that another part of the structure is left unattended means that the hygiene of this flushing method is not up to par;
- circular option - the drain is realized from three points, which guarantees the same cleaning of the entire bowl at the same time. This option is of course better.
Toilet lid selection
It is also an essential stage in the selection of plumbing equipment, both aesthetically and practically. Basically, all lids have standard qualities, but there are lids with fine-tuning
A system of this type will make it possible not to constantly worry about carefully closing the lid, but will ensure smooth and accurate closing itself.
Quality check at the time of purchase
At the purchase step, the main thing is to check the device for external damage - chips, cracks, scratches. The inside of the rim of the bowl can be checked for enamel by running your hand over it. If it is absent, then this will not become a significant drawback, but still it is better that there is enamel.
It is necessary to check the set of linings and products for fasteners. The lining material can be rubber or silicone. Experience says that silicone pads last much longer. Bolts for fasteners must be strong, it is better to avoid fragile products on alloys.If the selected toilet model has weak fasteners in the set, then it is a good option to buy higher-quality products separately.
It is necessary to pay attention to these parameters, such as the size of the seat, the height of the toilet - everything that will make it possible to increase comfort in use. Having figured out what exactly affects the presence or absence of splashes and splashes in the toilet, you can choose a product that is remarkably appropriate
It is possible and necessary to ask consultants at points of sale, but still it is better to take care of simple knowledge in the field of the purchased item.
Having figured out what exactly affects the presence or absence of splashes and splashes in the toilet, you can choose a product that is remarkably appropriate. It is possible and necessary to ask consultants at points of sale, but still it is better to take care of simple knowledge in the field of the purchased item.
Selection of the design of the toilet outlet
The first thing you need to know in order to form which toilet is better to choose is the design of the toilet neck. It directly depends on the design of the sewage system.
There are three types of toilet neck:
- horizontal;
- oblique (angular);
- vertical.
If, for example, it is assumed that a professional will install the toilet bowl, it is necessary to discuss with him all the conditions that you will need to pay your own attention to so that the work result is of high quality and does not require alteration. It is necessary to discuss the selection of the drain, what it will be - horizontal, vertical or oblique. If, for example, it is planned that the toilet will be closely adjacent to the wall surface in order to free up space in the front, then it is necessary to understand whether the horizontal view of the neck will make it possible to make a sudden slope of the drain corrugation
If it doesn’t work out, then you can pick up an oblique view of the neck. This is important to discuss at the beginning of work.
It is necessary to discuss the selection of the drain, what it will be - horizontal, vertical or oblique. If, for example, it is planned that the toilet will be flush with the wall surface in order to free up space in the front, then it is necessary to understand whether the horizontal view of the neck will make it possible to make a sudden slope of the drain corrugation. If it doesn’t work out, then you can pick up an oblique view of the neck. This is important to discuss at the beginning of the work.
After that, you can go to the plumbing supermarket and select the model and design of the toilet bowl, which is suitable for the type of outlet drain.
