Foot valve installation
Installation of mixer and bottom valve
You can install any valve yourself. Installation of a mechanical valve is as simple as possible. The valve itself is inserted into the drain hole, fixed. A needle is connected to the lever and the eye of the valve, it is responsible for opening and closing the plug.
After installation, the siphon is connected. The function of the valve and the presence of leaks are checked. If the device works and there are no leaks, the valve is ready for operation.
Automatic bottom valve (installation)
There are faucets with an automatic valve equipped with an overflow and without it. Consider their installation. Before installation, it is worth checking the length of the pipes (they are rigid and must be shortened)
When reducing the length of the pipes, be sure to flush the unit under running water in all directions for 3-5 minutes. This will help to avoid disruptions in operation. It is better to put the mixer on a sealant, which will increase the quality of the fit and service life.
The valve is installed in the sink hole. The lever mechanism itself is immersed along with the mixer. After fixing, we connect all the pipes and hoses under the sink.
A water seal (bottle or tubular siphon) is placed in the drain, and the valve spokes are folded in the form of an equilateral cross. They are fastened with a self-tapping screw in a plastic cross shape. The ends of the spokes are connected according to the scheme: with a lever on one side and with a valve loop on the other.
Vertical translational movements will provide a future mechanism for draining water when the lever is pressed. If there is an overflow system, do not forget about it, connect it. We connect the lever of the mechanism to the valve and attach the siphon. We check for leaks.
In case of no result. We advise you to sort out the system and install again. In rare cases, a manufacturing defect is possible. Faucets equipped with a valve without overflow are installed in the same way.
Installing an automatic valve to an existing faucet
There are bottom valves for faucets (such faucets have a hole for the lever). If there is none. The installation task is more difficult, but doable. To do this, you need a hole for a lever or button. If the sink is metal, then you can make a hole yourself. And install the valve in accordance with the instructions.
The mechanical valve is suitable for the washbasin. The automatic valve is ideal for the kitchen. Submerging your hands in dirty greasy water is unpleasant.
Pay attention to the tools, it's good if they are without sharp corners. Line the sink before installation with cardboard or other material to avoid damage.
Gaskets occupy a special place during installation, do not forget about them. Tighten all nuts and bolts tightly.
Types of bottom valves
The bottom valve for the sink is an analogue of a rubber stopper. The difference between them is not only in aesthetics and hygiene.
The bottom valve works by pressing a button. This device is designed to hold water in the sink, which saves water, and therefore money.
There are such types of bottom valves:
- Mechanical
- Automatic
- with overflow
- Without overflow
The basis of the mechanism is a spring!
Main advantages:
- Easy to install
- Long service life
- Loyal price
Automatic bottom valves
H
The disadvantage is that in order to drain, you will need to dip your hand into the water.
Automatic close and open with a lever (button) The whole mechanism is located under the sink, which preserves the appearance of the faucet. The lever (button) itself is in most cases located behind the crane.
Advantages:
- The aesthetic appearance of the sink is preserved
- Installation is not difficult
- Hygiene
There are two types of automatic valves with and without overflow. Valves with overflow have an outlet, like in a bathroom, to prevent the sink from overflowing with water. Valves without an overflow are not equipped with this outlet.
If the washbasin or sink does not have an overflow hole, then it is logical to install a valve without this function. The valves are available in three versions. Under gold, bronze and chrome-plated metal. Which one to choose is up to you.
