The effect of setting the filter
Hard water saturated with a large number of all kinds of impurities is the main reason for the breakdown of the automatic washing machine. Because of it, the heating element most often fails, and over time, a thick layer of scale appears on individual parts.
Poorly treated water, which contains sand and other suspended particles, shortens the life of the drain pump, significantly reducing the quality of washing clothes. When installing a Geyser filter device, it is possible to obtain a positive effect, which is as follows:
- Reliable protection of heating elements of washing machines from scale.
- Reduced electricity consumption.
- Saving washing powder consumption.
- Extending the life of your home appliance.
In addition, the use of a filter product creates conditions for gentle washing of linen, after which it becomes softer due to the rejection of special detergents. At the same time, sodium polyphosphate binds iron dissolved in water, eliminating the possibility of yellow stains appearing on things washed in the machine.
Please note: All of the listed positive qualities should be attributed to the advantages of using Geyser filters for washing machines.
The range of filter products offered by the domestic market is quite large, and the choice of the most suitable of them depends on the preferences of the user.
Overview of Geyser filter modifications
Manufacturers of filter products of this brand produce a number of modifications used for various types of household equipment or performing other functions. Let's consider the two most popular varieties represented by the Geyser 1P and Geyser 1PF samples and find out what their difference is.
Geyser 1P
A product labeled "1P" is capable of purifying water from dangerous impurities contained in conduits in the form of fine sand or silt and leading to the appearance of limescale. It is mounted on the outlet of the pipeline with cold water and is intended not only for washing machines, but also for any other household appliances (dishwasher, for example).
The filter contains a special cartridge that retains all fine impurities contained in the water carrier. Over time, this element becomes clogged and requires replacement (it cannot be cleaned and restored).
As a filler in the device, foamed propylene granules are used, which provide high quality cleaning from impurities (the porosity index is about 5 microns). The body of the product is able to withstand pressure up to 25-30 atmospheres, so that any pressure of water in the pipeline is not dangerous for it.
Geyser 1PF
This model of a purification device has a slightly different focus, since it is mainly intended for purifying cold water from salt impurities. They are the main reason for the appearance of scale on the heating elements of washing machines, for which this device is designed.
The filter is made in the form of a transparent flask with a lid, which has inlet and outlet pipes. The polyphosphate-based filler, when combined with the salts contained in hard water, enters into a chemical reaction with them, as a result of which the impurities are neutralized.
Important! Since salt crystals dissolve easily, their number in the filter device decreases over time.
That is why it is recommended to replenish the filter tank loading periodically. A flask fully loaded with filler is usually enough for 365 washes on medium-capacity machines.
Both modifications of the Geyser filter, designed for washing machines and other equipment, are characterized by relatively low cost and sufficient efficiency.From the analysis of customer reviews on the use of filter elements of this type, it follows that a particularly attractive feature of the products is the optimal ratio of price and quality.
In the final part of the review, we note that if you want to increase the efficiency of cleaning the water entering the washing machine, it is allowed to install two filter devices at once at its inlet. According to experts, this technique will reliably protect the unit even from very strong pollution.
mixer requirements
Due to the presence on sale of a huge amount of uncertified goods of dubious quality, combined models must meet certain requirements. Otherwise, the accessory will not be able to serve the allotted time or it will not purify the water well.
Material for a quality faucet
Higher demands are placed on combined accessories, since it must be not only strong and durable, but also safe for the already filtered liquid.
High-quality combined water mixers are made of stainless steel, brass or compounds of these metals. They are not affected by the corrosive process and do not release harmful substances into the already purified liquid.
Combined faucet for supplying piped and filtered water
Purchase package
The combined kitchen accessory consists of:
- 1-or 2-lever crane;
- ceramic disk cartridge;
- outlet for purified water;
- replaceable or built-in aerator (one or two);
- flexible hose, from 45 cm long (up to 3 pieces).
In addition to the accessory, you need to buy a set of water purifiers.
Water filters for washing are:
- Flowing.
- Reverse osmosis systems.
Flow water filters are easy to install and are considered the best non-osmotic purifiers. Their advantage is the low price and the possibility of using purified water without waiting for accumulation - after the tap is turned on, the liquid is continuously supplied in a thin stream, and does not accumulate in the tanks.
Under-sink water filter
This water filter removes:
- chlorine;
- pesticides;
- salt;
- iron;
- solid particles.
The reverse osmosis system is an expensive and effective accessory. It sorts out all harmful microparticles, salts of heavy metals, making water similar to that flowing in a mountain spring. Additional flexible hoses and replaceable cartridges are included with the system, after which the device is mounted under the sink, connecting to the mixer.
The downside of using the system is that water filters do not constantly clean the liquid, it accumulates in the drainage tank, and after leaking through thin-film membranes, it goes to the tap.
Best Answers
Allevit:
A coarse filter in the water supply system is simply necessary, regardless of whether it is a central system or a well in the house. At the same time, it is placed not only on the pipe leading to the bath mixer, but on the entire system after the main tap from the common water supply riser. And I would advise you to put a filter like this: .gor-servis /service/1271-ustanovka-filtra-gruboy-ochistki . It can be cleaned very easily and it also has a monometer system, which is also useful. And tell the plumber if he would go better to dig holes - you don’t need to think there: take more, throw it away, while it flies - rest)))
klen054:
You probably meant the coarse filter... You can put it, even you need it, if you have such water ...
Andrey Denisov:
Be sure to set it if the water is bad ... and do not forget to put a tap in front of the filter (you will need this to change filters).
Old toothless concrete worker:
A coarse filter is required. Every month it clogs with scale, each of which is the size of a little finger nail. Why only hot water? It must be placed at the entrance to the apartment from the riser.
Anatoly Gorbachenko:
A coarse filter is usually installed at the water supply inlet to an apartment (house), then a metering unit, after which a water treatment system (filters, softening, etc.) On the advice of your plumber, you need to install two filters - for hot and cold water, because -that it is not known where the sand comes from. To make a diagnosis, you need to see the water supply scheme of your home. I suspect that you have a water heater (column, boiler) from where the scale is in the form of sand.
Alexander Mozgin:
And you can put such a filter after the faucet on the bath, I have a faucet, a faucet and a watering can tie into the sides of the acrylic bath and all the giblets are hidden under the bath, that is, there is a technical possibility, but in the revision window, at the input, you probably can’t turn around! Thanks for the tip!!!
Expert answers
Marina Parshenkova:
No need to tempt fate - a ceramic sink is so expensive, one wrong move - and you can throw it away. , they do not stick together, they are not repaired :(((Such things need to be trusted to specialists !!!
Liskay:
in building materials, nozzles for a perforator drill are sold. called Belerinka. come in different sizes and different materials.
Vera Medyantseva:
you need a special drill for ceramics. Or call the master. :)
Vladimir Belorussov:
Ceramics should be drilled with a diamond core drill at low speed with water. The most important thing is to try to install the drill so that it does not swing, otherwise the drill will jam and you will get a marriage, possibly irreparable. If there is no experience, it is better to contact specialists.
Slav:
The filter tap is 12 mm in diameter, if there is a 14 mm drill bit, drill it yourself, only strengthen the wooden block with a clamp from below,
infection:
Just not a perforator. themselves no
Denis Gritsaev:
you can use a plasma arc, but you don’t have an apparatus ...
Andrey Volkov:
Tubular drill - drills (selecting the desired diameter in the store). And how to make sure that he doesn’t get carried away - it’s so elementary - I see everyone knows this - if you write something, I’ll teach
Here I say:
Gently with a puncher in the drilling mode without grooving with several drills, starting with the six.
Shulev Ivan:
If you showed us a photo, then everything would be immediately clear.
And for a separate water tap, I'm not going to change the entire sink.
Sasha:
the third is for connecting a water filter, if you have it connected under the sink and drive plumbing in the neck, he is absolutely not qualified in this
Alex Mishin:
The first answer is great! Instead of a pipe for supplying filtered water, you can connect an alcohol pipeline - by turning the handles you can adjust the strength of the vodka pouring from the spout!
In fact, apparently, your faucet design provides for the possibility of connecting a small shower or a brush for washing the sink. This hose is for the third thread. Switching the water supply to the spout (colloquially - “faucet spout”) or to the shower can be solved in two ways. Or there is a switch on the faucet body, like above the bathtub. Or an automatic valve is hidden inside the faucet body: in this case, there should be a button on the shower head - when you press it, water will pour out of the shower, and the spout will stop flowing. The system is rather unreliable: I have not had such a faucet even for two years, and even when the shower is running, the water from the spout does not stop flowing. You can read for example here.
Purified water is always served on a separate tap - so that splashes of dirt and soap do not fall on its spout, at least.
Alexander Greshnev:
Look at mastercity for a lot of info on this.
Timurat:
Water filter and plumber goof
Wit Polek:
the answer from Alex is the only correct one
IFNs:
Everyone is wrong. It turns out that the tap regulates the pressure at the heater inlet - in an original way, and the cartridge limits the pressure of the water supply
It is possible to connect a boiler water circuit instead of a boiler
zurab tsandekidis:
third for filtered water.
SLAVA:
I think for santa shower
