The main features of the placement and installation of a toilet bowl with a direct outlet

Features and types

Almost all models of toilets with oblique outlets can be divided according to several criteria (classified):

Its main difference among other toilet bowls is where the drain tank is located. On this basis, toilets such as compact toilets with an oblique outlet can be distinguished; products, the tank for which is installed separately, have ceased to be sold, since they are discontinued due to their unpopularity; plumbing fixtures with flush-mounted cistern. The latter are increasingly coming into use, because they have two significant advantages: first, thanks to them, you get a compact product, since the cistern is mounted in a wall or niche; the second is that it has a stronger drain, which ideally flushes sewage through the sewer system. Plumbing compacts are in great demand because they are cheaper than toilets with a hidden cistern, but are still gradually becoming a thing of the past, being replaced by more fashionable plumbing. Nevertheless, if you look, even among the compacts, several types can be distinguished: toilets with a detachable flush tank, the main advantage of which is the ease of transporting them from the store to the house, and the so-called monoblock compacts, which are a cast product, where the toilet is directly combined with cistern. The installation of such a toilet with an oblique outlet consists of fixing it to the floor, while simultaneously connecting it to the sewer system

That is, you will not have a product assembly stage.
Another important distinguishing feature among toilets is the material from which it was made. Most often you will deal with faience (they cost less) or porcelain products.

The former will serve you less than the latter, since faience absorbs moisture quite strongly, which leads to a change in its original color and the formation of small cracks on its surface. Porcelain is more expensive, but dirt practically does not linger on it, although it does not tolerate shock and mechanical damage very well. In addition, acrylic toilets are presented to your attention, which can be taken care of with cleaning products that do not contain abrasive particles. Or opt for more exotic and fashionable toilets made of glass, natural stone or copper. Designers have even created a toilet-aquarium, which has double walls, between which exotic fish swim.
The third feature that allows you to separate toilets with an oblique outlet will be the shape of their body. Here we can talk about a poppet product with an oblique outlet, which is characterized by the fact that it gives a minimum amount of splashes when you use it for its intended purpose. The funnel-shaped toilet is definitely worth mentioning, although it has a number of negative aspects: a lot of splashes during use, poorer drainage and difficulty in caring for it. So it is better to buy a visor latrine with an oblique outlet.
One of the features that distinguish toilets with an oblique outlet is the way they are installed, in other words, the ability to connect them to the plumbing system. Here you will be dealing with a floor standing toilet with an oblique outlet and a bottom water connection and a toilet bowl that has a side connection to the water line. The first, by the way, will allow you to almost imperceptibly bring a flexible water hose to the toilet.
And in conclusion, I would like to mention the division of the aforementioned toilet bowls depending on the type of flush, because it completely depends on the internal components of the cistern. So we can talk about models that provide for continuous draining of water (full tank) and draining in a certain dosage (controlled).The second allows you to control the flow of water in the tank yourself, depending on which of the two buttons you pressed: a smaller one - half or a quarter of the water capacity will pour out, a larger one - the drain tank will be completely empty. This allows you to use water more economically, especially if you have a meter installed.

The nuances of the work

If you have to carry out work in the bathroom of an old house where cast-iron pipes are installed, then the device must be connected in the following way. The outlet is inserted into the opening of the sewerage system. The remaining gap should be filled with cement mortar, this must be done in such a way that the composition does not get into the riser. You can use a cuff that is put on the release, immersed into the sewer hole. Previously, the surface must be cleaned of cement, dirt and foreign objects. Irregularities can be eliminated with a sealant.

Toilet selection

The purchase of such equipment is a responsible business. It is necessary to take into account several criteria at once.

1. Release of the toilet. How to choose a toilet outlet, we have already decided and we know that it must match the sewer outlet.
2. Manufacturing material. On sale you can see models made of porcelain, faience and metal. Porcelain models are more hygienic, as this material has small pores, and pollution is not strongly attracted. The cost of such toilets is higher than faience.
3. The dimensions of your toilet will affect the choice of model. In different cases, you can choose a floor, hanging or attached toilet. For small rooms, it is advisable to use a hanging option. It will be possible to keep the room in perfect cleanliness, since the entire floor surface is freed.
4. Bowl shape. It affects the formation of spatter during rinsing. Usually they are: with a slope, with a shelf and funnel-shaped.
5. The type of tank is also an important point. This is practically the most important part in this equipment. They are suspended, that is, they are attached at a distance from the toilet bowl. Such models are used less and less, but they provide maximum water pressure when flushing. Built-in tanks fit into the wall, while saving space in the room, and work almost silently.
6. Toilet lid. Now there are models with a built-in microlift on sale. Such a lid will no longer wake up your household with its rumbling lowering onto the toilet. If you have new equipment, then you can only purchase a seat with this design.

Thus, the variety is huge and it is really possible to get lost in this assortment. We hope that our selection tips will help you make your bathroom comfortable, versatile and stylish.

http://aqua-sovet.ru

What you need to know about installation work

Which toilet outlet is better - straight or oblique - you can decide for yourself if you know if your bathroom is limited in free space. Despite the fact that toilets with a horizontal drain are increasingly being installed in new buildings, devices with a vertical outlet do not lose their relevance. To connect the toilet to the sewer system, prepare:

• fan pipes;
• corrugated pipes;
• cuffs;
• eccentrics.

When using a fan pipe, you can achieve the unity of the device with the connecting material, because both are made of porcelain, faience and ceramics. The only difficulty during installation in this case may be the need to match the installation site. It will not work to fit the trimming method.

The cuff-eccentric is made on the basis of polymers and is a design of a pair of bends, in which the axes are shifted. The cuffs can have different lengths, so it is easy to choose them to connect the device to the sewerage system with other socket and outlet parameters.Installing a direct outlet toilet may require the use of corrugated pipe, which is ductile and can bend as well as stretch. If you use this element, the master will get freedom of movement and facilitate installation work. But in this case, one should not forget about the slope of the sewer pipe. In this case, care should be taken about the rigidity of the material so that the walls are reliable and durable during further operation.

A cast iron sewer pipe can be connected to a plumbing fixture using a rubber cuff. It is located at one end of the pipe. The toilet bowl should be put on the outlet, the cuff is turned out in such a way that it is possible to achieve complete sealing. You can increase the density of the connection by using a sealant.

Vertical equipment

This system is not very common in our country, since sewers during the construction of domestic multi-storey buildings are laid in the walls, and for a toilet with a vertical outlet, the sewer pipe must pass under the floor. However, in the construction of houses and cottages, when it is possible to choose the method of laying pipes, vertical systems are often used.

Toilet bowl floor Gustavsberg Basic 390 GB1039026105 (vertical release)

Advantages and disadvantages

Models with an outlet that goes into the floor (by the way, they, like the options with a horizontal pipe, are called straight lines) have a number of advantages over the types considered earlier:

• Silent operation;
• Hygiene. In the vertical bowl of such a toilet, the water level is quite high;
• Ease of cleaning the walls of the bowl;
• Efficient flushing, which is provided by a siphon;
• No splashing or splashing;
• Space saving and the ability to place the toilet anywhere in the room, since there is no attachment to the wall;
• Aesthetics. The pipes coming from the toilet are not visible.

There are no obvious shortcomings in this release. Of course, you will not be able to install a hanging toilet with this type of sewage, only floor and side models are available.

Toilet bowl with outlet going to the floor

Models

• IFO Frisk 21020000. This is a compact toilet bowl of Swedish-Russian production. This model costs 6,500 rubles. It has a double drain button and a micro-lift;
• Vidima Seva Mix W904701. This is a compact porcelain model from Bulgaria. The microlift system is not provided in it. Price - 8,200 rubles;
• Jika Lyra 2423.7. Toilet-compact Czech production. Made from porcelain. Two drain modes (3/6 l). You can buy such a toilet with a vertical outlet to the floor for 3,900 rubles.

Photos of popular toilets with a vertical outlet

Vidima Seva Mix W904701

IFO Frisk 21020000

Jika Lyra 2423.7.

Toilets with oblique outlet

Found: 81

Easy draining of waste from the toilet into the sewer is the key to its good work. Any plumber knows that additional elbows, transitions, couplings and other elements of sewer fittings prevent free flow and reduce flushing efficiency. Therefore, depending on the height and location of the sewer pipe, one of the three existing structures is used:

• toilet bowl with oblique outlet;
• toilet bowl with direct release;
• toilet with vertical outlet.

In the section "Toilets with an oblique outlet" we have placed 15 corresponding models presented by Russian and foreign manufacturers.

At the same time, Russian products occupy a cheap price niche, they have little competition in the lower and middle price segments from Swedish products, and Italian craftsmen offer the most expensive, elite goods. The cost of toilet bowls ranges from 3,500 to 35,500 rubles.

Pay attention to the list of additional equipment - there you can find a useful accessory that significantly increases the convenience of using this device.

Buying a toilet with an oblique outlet is an advantage of choice

Since the drain option depends on the specific conditions, we strongly advise you to choose a toilet together with an experienced plumber who will subsequently install it for you. In panel-type houses, as well as in old brick houses with wooden floors, sewer pipes are not hidden in the wall, but are usually mounted along the floor in the corner.

The owner of such apartments will have to buy a toilet with an oblique outlet, since this option is best adapted for these conditions. The use of a modern plastic sewer fitting simplifies the installation of the toilet bowl in cramped conditions of the toilet room.

The buyer only has to evaluate the design and choose the design of one of the floor-mounted toilets in our store.

Photos and prices of imported toilet bowls with a 45 degree outlet

All imported oblique outlet toilets are adapted to the requirements of domestic water and sewer networks. Most often, a consumer is looking for a 45-degree toilet, although the angle of inclination of the toilet drain from different manufacturers may vary slightly in one direction or another. In retail chains, you can find a floor-mounted toilet with an oblique outlet of 45 and 30 degrees.

When replacing an old toilet, you have to look for a model with the same overall dimensions and the same outlet angle. In extreme cases, you like a floor or side-mounted toilet with an oblique outlet can be connected to the sewer with a special flexible corrugation or a special plastic eccentric.

Horizontal release

This type of toilet bowl has recently gained more and more popularity. Such a release can be observed in new buildings, where the sewer system was prudently made for them.

Equipment with a horizontal outlet has a spigot parallel to the floor at the rear. To install such a toilet, you need to push it tightly against the wall. If this is not done, then the view, frankly, will not be very attractive. The sewer pipe is connected using a special cuff.

The toilet is attached to the floor, as usual, with dowels and bolts. Among the advantages of such a model are:

Toilet with horizontal outlet

• Ease of installation.
• Neat appearance.
• Convenient location for repairs.

In addition to the pros, there are also disadvantages. If the installation is not carried out according to the rules, then the connection of the sewer pipe and the pipe will be short-lived. The designs of toilets with a horizontal outlet can be very diverse, so their popularity is only growing. Here you can see: attached, floor, suspended models. Depending on the size of your toilet, you can choose the appropriate option.

Installation

If we talk about connecting a toilet with an oblique outlet to the sewer system, then in principle it is almost no different from installing (replacing) another toilet with any outlet. Almost the same assembly, during which the toilet is installed, as well as fixing it to the floor and connecting it to the plumbing system. But when it comes to connecting it to the sewer system, you will have three ways in which you can install it. They differ from each other depending on the use of one or another connection option:

1. Direct connection to the socket of the sewer branch. It will suit you only on the condition that the exit from the plumbing and sewer lines match perfectly, that is, you do not need to move the product to the left or right. This happens if you clearly measure the location of the socket or replace the old toilet with a new one, but absolutely identical. With such a connection, you will have to use a special cuff, which differs depending on the material from which the sewer pipes are made - cast iron or plastic.Its installation is very easy: lubricate the outlet of the toilet with soap (shampoo) and push it into the socket, on which the cuff is already installed. You just have to mark the places for fastening and fix the plumbing to the floor with high quality.
2. Connecting an oblique toilet with an eccentric. It is a bell with a center offset of 50 mm, with a sealing gasket already built into it. By turning the eccentric inside the sewer outlet, you can move the toilet to the right or left of the center of the hole by 50 mm in any direction. In addition, a shift in the center of the sewer outlet up or down is provided. A very convenient device that allows you to connect a latrine to the sewer if there are slight discrepancies between the outlet and the socket.
3. Connecting a toilet with an oblique outlet using a corrugated outlet. The eccentric helps to fit plumbing to the sewer outlet with small deviations, but the corrugation does this with significant deviations. Additionally, with the help of corrugations, you can turn the toilet bowl at an angle of 90 degrees relative to the sewer outlet. But at the same time, you will have one serious drawback of the removal from the corrugation - your latrine will move far from the wall, from about 50 mm and further, depending on the circumstances. However, you can use the flex as a cardinal remedy in extreme situations.

It remains only to mention that you can even install a toilet with an oblique outlet instead of the same product, but with a vertical connection. Of course, it will move forward, so experts recommend using it only as a temporary measure. You can make such a connection using an ordinary pipe turn at 45 degrees.

Characteristics of the toilet bowl with direct outlet

The direct outlet of the toilet bowl was and remains typical for buildings of the 50-60s of the last century. In the event that you decide to acquire a new house, especially if it is being built from scratch, you need, among other things, to think carefully about the design features of your bathroom. If you are most interested in a toilet that drains vertically, then it would be nice to know all the advantages and disadvantages of your choice.

The vertical outlet toilet has an important feature that distinguishes it from other configurations: it has a built-in spigot and siphon in the bottom of the body. A toilet with a direct drain is good because it does not require a special installation location. It can be mounted even in the middle of the room at any angle convenient for you. By installing this toilet in the bathroom of a new home, you can safely implement extraordinary design solutions.

The thing is that in this case the sewer line runs under the floor, along with all engineering communications. In this situation, you have the opportunity to remove the sewer socket in any place convenient for you.

A design with a vertical drain is not very common in our territory, and in order to buy it, you will have to go around more than one store. But if you put in the effort to find it, you won't regret your time, as a direct outlet toilet has a ton of benefits that other types don't.

The toilet bowl, which is equipped with a vertical drain, has the following advantages:

• Pushes the boundaries of the layout and allows you to significantly save space in small toilets.
• It is more hygienic due to the high water level in the bowl.
• The toilet bowl is characterized by good flushing of feces from the walls of the bowl.
• The built-in siphon gives a greater retracting force, which also leads to more efficient flushing.
• During use, the water in the bowl is not splashed.
• The toilet cistern is designed with high quality and reliability.

Now that you have purchased a vertical outlet toilet with peace of mind and confidence, let's look at the details of installing it.

Advantages and disadvantages of a toilet with a vertical outlet to the floor

Each release type has its pros and cons. Bottom flush toilets are gaining popularity due to significant advantages. Consider the main advantages.

The choice of a suitable model in a particular case is based on the options for the release of the drain system, which should dock without any problems with the sewer

Advantages of vertical release:

• Allows you to save space;
• The high water level ensures a hygienic runoff;
• Plaque from the walls of the toilet bowl is better washed off;
• A good descent is also provided by the built-in siphon;
• No splashing during rinsing;
• High quality and reliable tank.

This type has no particular disadvantages. Among the minuses, it is worth noting the need for a special hole in the floor. It needs to be cut into the tile during installation. Also a disadvantage is a small selection. You need to work hard to find the right option.

Choosing a way to connect the toilet to the sewer

To quickly install a new toilet instead of the old one, it is recommended to select a suitable connecting cuff in advance. To do this, carry out comparative measurements of the existing and new toilet - if the parameters match, you can choose a cuff of the same type that is already installed.

Rigid drain pipes with a hermetic fastening system at one end are used if the outlet of the toilet bowl and the entrance to the sewer pipe are strictly on the same axis. The dimensions of such a pipe are regulated by trimming. A pipe with cuffs at both ends cannot be cut.

Eccentric collar, suitable for use if the axes of the outlet of the toilet bowl and the entrance to the sewer are slightly mismatched. By turning such a cuff, you can achieve the correct connection of the elements.

Corrugated pipe - universal mount. It has a certain drawback - if installed incorrectly, waste can accumulate in the sagging folds of the corrugations, which threatens to clog the system. But on the other hand, the corrugation allows you to connect the toilet to the sewer, regardless of the location of the entrance to the sewer.