How to choose the right model
Learn how to choose the right filter, and their benefits. The advantage of disposable filters is that they do not need to be cleaned. Such an element has a special indicator, when it is filled, it is necessary to replace it. Another advantage is that it can be cut to fit the exhaust system.
Reusable filters are demanding to maintain, but safer and more reliable in use. Acrylic elements are made of a fragile material that can be damaged, so cleaning is carried out with special care, do not rub it hard.
A fatty device of a metal type, compared to the rest, has a long service life; it is made in the form of cassettes. The composition of such a filter includes a perforated pipe of a metal type with a symmetrical or asymmetric type of perforation. The air passes through the metal grate, changes direction, and dirt from soot and grease remains on the filter walls.
Why install filters on the exhaust system
The oil filter is an indispensable part for air purification. Since it cleans the flow of outgoing air from fats and soot. In the absence of a filter device, the inside of the exhaust system will be covered with an oil coating, and it will be difficult to carry out maintenance. Also, the hood engine can quickly become unusable, as it will be under heavy load.
If the hood is placed strictly above the surface of the burners, then the accumulation of a large amount of fat can lead to a fire. Therefore, the use of a special filter is mandatory, but it must be replaced or cleaned in a timely manner, as the device will not work well, and dirt will settle on the kitchen surfaces.
A fat-type filter is necessary to purify the air from various contaminants that can settle on kitchen surfaces during cooking. Such an element prevents global grease contamination inside the exhaust system. When using such a device, the cleaning process is quick and convenient.
How to clean reusable hood filters
First you need to prepare all the components for cleaning, for this, the exhaust system is disconnected from the outlet and disassembled. The mesh, which closes the interior space, is located in the frame, twisted with bolts, they must be unscrewed. Remove the retainer, filter, and the pipe connecting to it. All parts covered with grease are removed and washed.
If the filter and hood are maintained regularly, you can use a regular dish detergent to wash out the grease. All parts are immersed in a soapy solution, left for up to 30 minutes, washed with boiling water, and gently wiped with a napkin or cloth.
If the grease has been strongly absorbed into the grate, and the filter has significant contamination, then aggressive cleaning methods are used.
- Half a glass of soda is poured into a medium-sized container, boiled, the grid and other contaminated elements are immersed in it. Boil for about half an hour, if the filter does not completely fit in the container, then place one part, then turn over, and clean the other side.
- Grated laundry soap is dissolved in hot water, placed in the filter, left for a while, the dirt is washed off with a sponge.
- Old fat can be removed from the filter using acetic acid, it is poured onto the surface, left for up to 10 minutes, and the contamination is cleaned with a hard sponge.
- To remove fat, you can use lemon juice, rub the surface with it, leave it for up to 10 minutes to corrode, wipe it with a damp cloth. The procedure must be carried out until the element is completely clear.
To remove significant heat pollution, you can use special tools, you can take a pipe cleaner, but the procedure must be performed very quickly, otherwise the part may be damaged. The contaminated element is laid out in a container, the surface is poured with the composition, while the fat begins to actively dissolve, after which it is thoroughly washed with cold water.
To remove old dirt, you can use aggressive or milder products. After the filter is completely cleaned, it is washed under running water, then dried naturally, you should not place the element near the heater. If traces of fat remain in some areas, then the procedure is not performed again, you can wet a napkin with lemon juice or vinegar, and wipe such places until completely clean. After that, all cleaned parts are installed back into the system, and the hood is connected.
Single-use grease traps are not subjected to such a process, after contamination they are simply thrown away and new elements are installed. But reusable filters are considered more reliable, safe, and last a long time. The article describes all the advantages of the main types of grease traps, and which one to choose will be an individual decision.
How to install a grease trap under the sink
The work of any grease traps, both industrial and domestic types, is quite simple. Fat is lighter than water, so it gradually accumulates on its surface, forming a film, which, in turn, is discharged into sedimentation tanks specially adapted for this purpose. As the sedimentation tanks accumulate with fatty deposits, they are mechanically cleaned.
Grease trap device
The use of household grease traps allows you to keep the kitchen space in constant cleanliness. In addition, the advantages of grease traps are as follows:
- The use of grease traps allows you to avoid unpleasant odors in the kitchen from the sink;
- When using this equipment, there is no clogging of sewer pipes. You can read about how to clean the sewer by clicking on the underlined link;
- Ability to purify wastewater by 25-30%.
If the grease trap has not yet been purchased, but only its choice is being made, then you should know this. To choose a grease trap for washing, you should calculate its performance. To do this, you need to multiply the height, length and width of the sink, thereby finding out its displacement.
In addition, you should decide on the type of grease trap, since it can be of storage type and flow type.
Grease trap installation
In order to install the grease trap with your own hands, you should carefully study the attached instructions for the selected equipment, as well as follow the simple tips below:
1
To install the grease trap, it is necessary to choose a solid and, no less important, flat surface. Also, there must be free access to the installation site of the grease trap during operation.
As a rule, the installation of the separator is most often carried out directly under the kitchen sink, or near the dishwasher.
2. The installation location of the grease trap is selected, then it follows, proceeds to the next step, connecting the inlet pipe with the sink sewer hose or any other equipment from which wastewater will be discharged.
3. Then the outlet pipe of the grease trap is connected to the sewer system through a rubber seal.
4. After the installation of the grease trap under the sink is completed, it must be filled with water to check the tightness of all joints and connections.
5. Then you can close the upper part of the grease trap with a lid and use the sink.
As you can see, installing a grease trap under the sink is a simple job, which is no more complicated than installing a sololift or other similar equipment.
Types of grease filters
Two types of devices can be used for extracting, they can be fat-absorbing or coal. The latter types perform fine cleaning, remove odor, steam or harmful gas. The main substance that is part of this model is activated carbon. If the exhaust system removes air, then such filters are not used.
The grease filter performs rough cleaning, retains grease or soot, it serves as a good protection for the internal elements of the hood, this makes the system more durable. Such an element of trapping fat is divided into three types.
- There are disposable models, they can be paper, synthetic winterizer or non-woven. On the surface of the device there are special marks that disappear when the filter needs to be replaced.
- The acrylic look is reusable, being washed about once a month with soapy, lukewarm water. It is forbidden to wring out the element, as it can be damaged.
- The aluminum filter can also be washed or cleaned, meaning it is also considered reusable.
