Pumps dub specifications

1 Types and applications of DAB pumps

This brand for the production of equipment is represented by mass-produced products with many model ranges. In addition to pumps, DAB plants produce various equipment and spare parts with accessories.

DAB products can be divided into several types:

DAB circulation pumps are widely used in both domestic and industrial sectors. They are indispensable in the development of heating and water supply systems for the circulation of fluid through a closed pipeline loop. DAB circulation units are produced with a wet rotor, in the form of a sphere, with an on-line electronics adjustment function.
Well pumps DAB are designed for pumping liquid from wells. This method speeds up and facilitates the work process. DAB well pumps exist in several modifications, from which DAB submersible and surface pumps can be distinguished. Surface units are less suitable, since they have a maximum lifting depth of 8 meters.
DAB borehole pumps are used to pump out liquid if the well is more than nine meters deep. The choice of apparatus for wells is carried out after the required calculations are carried out according to the parameters.
DAB drainage pumps are used for pumping out unnecessary, excess water from flooded basements, garage pits, tanks, reservoirs, waste water. Devices for drainage can be divided into surface and submersible.
DAB self-priming pumps are used for autonomous water supply systems that cannot be connected to a sewerage system. Such a water apparatus is installed at a distance from the place of intake and the water is lifted, which passes through the unit itself. Often pumping stations are made from such units.
Fecal pumps DAB. Such devices are useful for connecting waste fecal pipes to the central sewer. The fecal unit will provide reliable operation for moving wastewater through the pipeline, even over long distances.
DAB centrifugal pumps are often used for heating, water supply of houses and buildings, agriculture, civil and industrial construction. A simple design reduces the number of breakdowns and wear of internal parts; repairs of such devices can be done by hand.
DAB multistage pumps are vertical devices that can pump water from any source. Their main advantage can be considered small size, which significantly expands their scope.
Console-monoblock pumps DAB are often used where circulation is needed for heating or water supply systems of houses, apartments or buildings. If a single mechanical seal is installed for a DAB pump, the liquid temperature can rise up to 1050°C during circulation. This device is not suitable for use with chemical, flammable and explosive liquids or substances.

1.1 Description of DAB pumps

Consider the description and data of some model ranges and individual models that are manufactured by DAB. The DAB circulation pump is most often used for DAB heating, creating water circulation through a closed pipeline. Units of this type are capable of operating in a three-mode schedule, which makes it possible not to carry out various calculations when choosing an apparatus.

Circulation pumps for heating Dab

Circulation units are represented by several model ranges:

Classification of circulation units Dab

Combined into several series:

BPH - devices for universal tasks that are used both in everyday life and for industrial purposes;
ALP, ALM - more durable parts. So, the body is made of bronze, resistant to rust and leakage;
A, B, VB and VA are the most common modifications that are suitable for private houses and apartments;
CP and CM - have high-power hydraulic characteristics, allowing them to be used for large industrial facilities;
E - industrial series, which is distinguished by the possibility of manual adjustment;
D - have a dual design, which contains an additional (backup) pump. Mounted on potentially dangerous objects.

DAB VA 35130 230V

A long-loved model of circulation equipment with a wet rotor. It operates in a wide temperature range - from -10 to +110 0С. Its original design has proven itself in heating, geothermal and newfangled "warm" floor systems, popular with our fellow citizens.

The pump is a monoblock unit with two main working elements:

It has reinforced bearings that are self-lubricated by the transported fluid. Through graphite gaskets, they are connected to the motor shaft. Installed horizontally.

Advantages:

hermetically sealed cast aluminum alloy body;
steel shaft has increased wear resistance;
equipment with a reliable 2-pole asynchronous electric motor, which is protected from overheating due to its own resistance;
the engine operates in three speed modes;
works from a network with a voltage of 230 V;
withstands pressure of 10 bar;
the presence of a check valve;
high degree of electrical protection and isolation.

Specifications:

Power - 0.071 kW;
Throughput - up to 4.2 m 3 / h;
Head - up to 6 m.

DAB VA 25130

Easily mounted in systems with membrane or closed expansion vessels. A three-position switch on the terminal box allows you to independently select the operating speed.

Advantages:

the presence of an air vent;
equipment with a thermal switch;
cast iron body;
steel version of the shaft and the protective casing of the impeller;
impeller made of technopolymer with good anti-corrosion properties;
have 1 threaded socket.

The Italian company DAB has firmly established itself in the world market for the manufacture of pumping equipment and was founded more than 30 years ago. DAB expanded its production and acquired six branches located in Europe, as well as a representative office in China.

Over the years of its existence, the products have been constantly modernized and modern technologies have been introduced. The products manufactured by this company are of high quality, durability, cost-effectiveness and include many series for the production of pumps with their own model ranges and components.

DAB pumps download information

DAB pumps: certificates

DAB Certificate of Conformity

DAB PUMPS is an Italian company specializing in the production of pumping equipment, which has been developing and existing for 35 years. Every year more and more consumers of DAB pumps are convinced of the excellent quality of these products.

Today, DAB PUMPS is implementing many promising developments, the introduction of which into production will lead to the emergence of a new generation of DAB pumps for various purposes. Of course, the main advantages of these pumps will remain unchanged - reliability, simplicity and low price.

DAB PUMPS owns three factories in Northern Italy, occupies 65,000 m2 of area, employs 560 people, a head plant with an administrative office in Mestrino, a logistics department, a marketing service, a customer support service, a finished product warehouse.

Production is mainly assembly: small circulation pumps, domestic surface and borehole pumps, booster units; plant with a powerful iron foundry in the town of Brendol (Vicenza), where IN-LINE pumps, DAB standardized console pumps and electric motors are assembled.The company's engineering and technical center is also located here; small production in Castello di Godego (province of Treviso) with an aluminum casting line, assembly of rotors, stators and small electric motors.

Almost all assembly processes are automated. The capacities and capabilities of the iron foundry make it possible to fulfill orders for the manufacture of complex parts of pumping equipment for other pumping companies. Excellent design and technological development of mechanisms allows minimizing the time for repair and preventive maintenance of equipment during subsequent operation.

The year 2008 was marked by an important event - there was a merger of several Italian factories around the main enterprise DAB PUMPS with the formation of the DWT GROUP (DAB WATER TECHNOLOGY) holding. DWT GROUP now includes several brands of pumping equipment and automation: DAB, LEADER, ALMA, TESLA, BRISAN, WACS.

DWT GROUP is certified in accordance with Vision 2000 and ISO 9001:2000 quality standards, which means that design, production, sales and customer support meet high international standards.

Of course, certification and awarding various product prizes is important for any company, but the most important criterion for recognizing the quality of its products is long-term operation. The consumer is primarily interested in quality, and especially the Russian buyer. DAB pumps have been operating in Russia for decades, demonstrating functionality, reliability and quality, confirmed by the time of operation in Russian conditions

And, nevertheless, every year there is a modernization and improvement of products in order to continue to meet the highest requirements of consumers.

DAB pumps have been operating in Russia for decades, demonstrating functionality, reliability and quality, confirmed by the time of operation in Russian conditions. And, nevertheless, every year there is a modernization and improvement of products in order to continue to meet the highest requirements of consumers.