Delonghi Eletta Cappuccino Top ECAM 45.760.W Online instruction manual 1625
173
• Remaining milk in the container can be stored in
refrigerator.
• In some cases, cleaning requires
wait until the device warms up.
Program the amount of coffee and milk
in a cup for buttons CAPPUCCINO (CAPPUCCINO),
CAFFELATTE(COFFEE WITH MILK) and MILK WITH
A LITTLE COFFEE (MACHIATO)
The machine is programmed to prepare standard
drinks. If necessary, change these
quantities do the following:
1. Place a cup under the coffee spouts and
under the milk spout.
2. Hold down one of the function buttons,
until the name of the drink appears on the display and
the inscription “PROGRAM MILK”.
3. Release the button. The machine starts dispensing milk.
4. As soon as the required amount of mo-
lock in the cup, press the button again.
5. The machine stops dispensing milk and, if
motrenno by the cooking procedure, after a few
seconds starts dispensing coffee: the display will show
the name of the drink and the inscription “PROGRAM COFFEE”.
6. As soon as the coffee in the cup reaches the required amount,
press the button again. Coffee preparation is interrupted.
The machine is now programmed according to the new number
the quality of milk and coffee.
Program the amount of coffee and milk in
cup for drinks MILK MENU buttons
milk
The machine is programmed to prepare standard
drinks. If necessary, change these
quantities do the following:
1. Press the MILK MENU button.
2. Press until the message appears on the display,
related to the desired drink (MILK, FLAT
WHITE, ESPRESSO MACCHIATO or MY MILK).
3. Hold down the MILK MENU button while the display
the name of the drink and the inscription will not appear on the player
“PROGRAM MILK”.
4. Release the button. The machine starts dispensing milk.
5. Once the desired amount is reached
milk in a cup, press the OK button.
6. The machine stops dispensing milk and, if
motrenno by the cooking procedure, after a few
seconds starts dispensing coffee: the display will show
the inscription “Program quantity PROGRAM-E COFFEE”.
7. Once the desired amount of coffee has been reached
in the cup, press the OK button. Coffee dispensing will stop.
The machine is now programmed according to the new number
the quality of milk and coffee.
HOT WATER AND STEAM SUPPLY
Attention! Burn hazard
Do not leave the machine unattended while it is giving out
pouring water or steam. The dispensing unit gets very hot,
this should be taken only by the handle.
Note!
When the "Energy Saving" mode is on, it may
take a few seconds to start dispensing hot
water and steam.
Hot water supply
1. Check that the water dispensing unit is correct
installed (Fig. 7)
2. Place a container under the dispenser (as far as possible
closer to avoid splashing).
3. Press the button (fig. 3). The display shows an over-
the letter “HOT WATER” and an increasing scale that
displays the cooking process.
4. The machine dispenses approximately 250 ml of hot
water, and then automatically stops the supply
chu. To manually stop hot water dispensing,
press the button again.
Change quantity automatically
supplied hot water
The coffee machine is factory programmed for automatic
dispensing 250 ml of hot water. If necessary
To change this number, proceed as follows:
1. Place a container under the dispenser.
2. Keep the button pressed until the display shows
the message “HOT WATER Prog. quantity”;
then release the button.
3. After the cup is filled with the required amount
hot water, press the button again.
The machine has now been reprogrammed according to the new
quantity.
Steam supply
1. Check that the water dispensing unit is correct
installed (Fig. 7)
2. Fill the container with liquid for heating or
and lower the nozzle/cappuccinatore (D5) into it.
3. Press the button: after a few seconds, the cappuccino
chinator steam will begin to flow, which heats up
liquid and the display will show “STEAM”
4. When the desired temperature is reached, stop
giving steam by pressing the button again. (I do not advise
exceed 3 minutes of continuous steam output).
404 nicht funcycliren
City all-gorodaAbazaAbakanAbezAbinskAdygeyskAznakaevoAzovAksayAlapaevskAleksandrovAlekseevskoeAlushtaAlmetevskAnapaAngarskAnzhero SudzhenskAntsiferovoApatityAprelevkaApsheronskArzamasArmavirArsenevArskArtemArhangelskAstrahanAhtubinskAchinskAchuevoBalabanovoBalakovoBalashihaBalashovBaltiyskBarnaulBatayskBelgorodBelebeyBelovoBelogorskBeloretskBelorechenskBerdskBereznikiBerezovskiyBiyskBirobidzhanBirskBlagoveschenskBlagoveschensk (Amur region). BlagodarnyyBoguchanyBolshoy KamenBorBorisoglebskBratskBryanskBugulmaBuzulukBuynakskBykovoVelizhVelikie LukiVeliky UstyugVerhnyaya PyshmaVidnoeVladivostokVladikavkazVladimirVnukovoVolgogradVolgodonskVolzhskVolzhskiyVologdaVolokolamskVorkutaVoronezhVoskresenskVotkinskVsevolozhskVyborgVyshny VolochekVyaznikiGatchinaGelendzhikGeorgievskGlazovGolitsynoGorodetsGoryachy KlyuchGroznyyGulkevichiGus HrustalnyyDalnerechenskDedovskDerbentDzhubgaDzerzhinskDzerzhinskiyDivnogorskDimitrovgradDmitrovDolgoprudnyyDomodedovoDonskoyDubnaEgorevskEyskEkaterinburgElabugaEletsEmanzhelinskEssentukiZhel eznovodskZheleznogorskZheleznodorozhnyyZhigulevskZhirnovskZhukovskiyZainskZaokskiyZvenigovoZvenigorodZelenogradZelenodolskZlatoustZolotuhinoZubova PolyanaIvanovoIvanteevkaIglinoIzhevskIzobilnyyIntaIrkutskIstraIshimYoshkar-OlaKazanKaliningradKalugaKamenkaKamensk-UralskiyKamensk-ShahtinskiyKamyshinKanashKanskKarpinskKaspiyskKashiraKemerovoKizlyarKineshmaKirishiKirovKirovo-ChepetskKirovsk (Murmansk region) KiselevskKlimovskKlinKlintsyKovrovKogalymKolaKolomnaKomsomolsk-on-AmureKopeyskKopevoKorolevKostromaKotelnikiKotlasKohmaKrasnoarmeyskKrasnogorskKrasnodarKrasnoznamenskKrasnokamskKrasnoturinskKrasnoyarskKrasny ChikoyKronshtadtKropotkinKstovoKuznetskKungurKurganKurkinoKurskKushvaKuschevskayaKyzylLabytnangiLaishevoLeninogorskLeninsk-KuznetskiyLesosibirskLivnyLikino-DulevoLipetskLiskiLobnyaLomonosovLotoshinoLysvaLytkarinoLyubertsyMagadanMagnitogorskMaykopMalahovkaMalaya VisheraMalaya SerdobaMahachkalaMezhdurechenskMendeleevskMiassMineralnye VodyMinusinskMihaylovkaMihaylovskMichurinskMoninoMonchegorskMorozovskMoskvaMoskovsky MurmanskMuromMtsenskMytischiNaberezhnye ChelnyNalchikNarofominskNahodkaNevinnomysskNeryungriNeftekamskNefteyuganskNizhnevartovskNizhnekamskNizhny NovgorodNizhny TagilNovaya UsmanNovgorodNovoaltayskNovokuznetskNovokuybyshevskNovomoskovskNovorossiyskNovosibirskNovosilNovotroitskNovocheboksarskNovocherkasskNovy UrengoyNoginskNorilskNoyabrskNyaganObninskOdintsovoOzerskOzeryOktyabrskiyOmskOpochkaOrelOrenburgOrehovo-ZuevoOrskPavlovsky PosadPargolovoPenzaPervouralskPermPetrozavodskPetropavlovsk-KamchatskiyPechoraPechoryPovorinoPodolskPravdinskiyPriozerskProkopevskProtvinoPryamitsynoPskovPushkinPushkinoPyatigorskRaduzhnyyRamenskoeRevdaReutovRzhevRodionovo-NesvetayskayaRodnikiRoslavlRossoshRostov-on-DonuRoshalRubtsovskRybinskRybnoeRyazanSalavatSalehardSamaraSankt-PeterburgSaranskSarapulSaratovSarmanovoSarovSasovoSevastopolSeverodvinskSeverskSergiev PosadSerovSerpuhovSertolovoSestroretskSibaySimferopolSlavyansk-on-KubaniSmolenskSovetskSovetskaya GavanSolnechnogorskSorochinskSosnovy BorSosnogorskSochiStavropolStaraya KupavnaOld ShaigovoOldOskolSterlitamakStupinoSudzhaSurgutSyzranSyktyvkarTaganrogTambovTverTemryukTimashevskTihvinTihoretskTobolskTolyattiTomskTroitskTuapseTuymazyTulaTutaevTyumenUlan-UdeUlyanovskUrayUryupinskUsinskUsole-SibirskoeUssuriyskUst-DzhegutaUst-IlimskUfaUhtaUchalyFryazinoHabarovskHanty-MansiyskHarovskHimkiTsimlyanskChaykovskiyChaltyrChapaevskCheboksaryChegem-PervyyChelyabinskCherepovetsCherkesskChernogolovkaChernogorskChehovChistopolChitaChusovoyShadrinskShaturaShahtyShuyaSchekinoSchelkovoScherbinkaSchigryElektrostalElistaEngelsYugorskYuzhno-SahalinskYurgaYurgamyshYakutskYaltaYalutorovskYaroslavlYasnogorskYaya
Delonghi ECAM 25.452.B User manual online 2021
DISPLAY MESSAGES
Message Displayed Possible Cause Solution
FILL THE TANK!
Not enough water in the tank. Fill the tank with water and/or install it correctly by pushing it all the way down until
snaps (Fig. 4).
CLEAN THE CONTAINER FOR
THUSH!
The coffee grounds container (A13) is overfilled
nen.
Empty coffee grounds container, drip tray, clean
them and put them in place (Fig. 23)
Important: when removing the tray for
collect water, be sure to empty the coffee grounds container, even
if it is almost full. If you do not perform such an operation, it may
so that the next time you prepare coffee, the container
overflow and clog the coffee machine.
GRINDING TOO FINE
OPTEGUL. COFFEE GRINDER
Too fine grinding, coffee comes out slowly
or it doesn't come out at all.
Repeat coffee preparation and turn the degree adjustment knob
grinding (Fig. 11) one division towards the number 7 clockwise,
while the grinder is in operation. If, after having cooked at least
2 cups of coffee, preparation continues to be too slow
repeat the correction, with the help of the regulator one more mark (see
grinder adjustment page 140).
INSERT CONTAINER FOR
GUSCH
After cleaning, the container for
coffee grounds.
Remove the drip tray and install the coffee grounds container.
APPLY PRELIMINARY MOLO
YOUR COFFEE
The “ground coffee” function has been selected, but
ronk was not introduced ground coffee.
Place ground coffee in the funnel or cancel the ground coffee function.
REMOVE SCALING!
Indicates that it is necessary to descale the
apparatus.
Run the descaler program as soon as possible
pi, described in the paragraph "Decalcification" (p. 145).
REDUCE THE DOSE OF COFFEE!
Too much coffee has been used. Choose a lighter flavor or reduce the amount of ground coffee.
FILL THE CONTAINER FOR
GRAINS!
Run out of coffee beans. Fill the container with grains.
The ground coffee funnel is clogged. Empty the funnel with a brush as described in par. "Cleaning in-
ronki for falling asleep coffee.
INSERT THE INFLOWER
After cleaning, has not been installed in place for-
brewing block.
Insert the brewing unit as described in the "Cleaning the brewing unit" paragraph.
node” (p. 146).
INSERT THE TANK
Tank installed incorrectly. Correctly insert the tank by pressing all the way.
GENERAL ALARM!
The inside of the device is too dirty. Clean the machine carefully as described in par. “cleaning” (p. 143). If
after cleaning, the message continues to be displayed, contact the center
technical support.
REPLACE FILTER
The water softener filter has been used up. Replace the filter and remove it according to the instructions in the paragraph "Filter
for softening water” (p. 146).
HYDRO SYSTEM IS EMPTY
FILL THE SYSTEM
alternately with
WARM WATER Confirm?
The hydraulic system is empty. Press OK and let the water drain from the dispenser to normal.
Press the CLEAN button
Milk has just been bred, and therefore,
it is necessary to clean the internal channels of the tank
for milk.
3. Press the “CLEAN” button (fig. 22) and keep it pressed until the filling
The entire progressive scale that appears on the display along with the message
Eat “CLEANING IN PROGRESS”.
INSERT WATER SPOUT
The water supply unit is not installed or is bad
inserted.
Install the water supply unit (C3) as far as it will go.
INSERT CONTAINER WITH
MILK
The milk container is not inserted correctly.
Install the milk container as far as it will go (Fig. 19).
