Kinds
Pump Brook V-40 The simplicity of the design is reflected in the number of types of pumps Brook, although the number of modifications produced is quite large.
This is due to the principle of water intake from the reservoir (reservoir):
- model with the upper position of the non-return valve (upper water inflow).
Creek-V-10, V-15, V-25, V-40. The pump is constantly in the water and the situation with overheating does not threaten it;
with the lower position of the valve (lower water inflow).
Creek-N-10, N-15, N-25, N-40. It is possible that the pump, having pumped out the maximum water, will be in the air, which threatens with inevitable overheating. To avoid this, it is equipped with a thermal relay that protects it from overheating.
In terms of design and technical characteristics, both types of pumps differ little from each other. Numerical indicators for all modifications indicate the length of the supply cable - from 10 to 40 meters.
Specifications
Vibration pump "Brook" according to the technical characteristics is considered to be a fairly high-quality equipment. In many respects, it surpasses the products of other manufacturing companies. Often, devices have a water lifting height of 40 m. Pumps with this indicator of 60 m are more practical.
Before installing the vibration pump Brook, you should watch the training video
The equipment can be submerged to a maximum of 7 m. If the device is used for a well, then its diameter must necessarily exceed the size of the pump itself. Usually its diameter is 10 cm. The main thing when choosing a pump is its performance. It is determined by the number of liters of water that the equipment pumps per hour of operation.
Varieties of pumps "Brook" in terms of performance:
- Small is 360 l/h;
- Average indicators - 750 l / h;
- High allows you to pump 1500 l / h.
Power is in the range of 225-300 watts. In this case, the voltage for all models is 220 V with a current frequency of 50 Hz. The equipment can work uninterruptedly for 12 hours.
Other characteristics include the type of pump. This is usually an immersive vertical view. The unit is aluminum, with one check valve. The weight is 4 kg. At the same time, models with different cable lengths can be found - from 10 to 40 m. The diameter of the hose varies between 18-22 mm. Water, depending on the model, can penetrate both from below and from above.
Device Capabilities
Of course, this pump will not solve your global problems in a fundamental way in the water supply of a large suburban area, since on average it has a power of one hundred and fifty to two hundred and twenty-five watts. But the owner of a country house will effectively help to deal with many processes.
Hydraulic supply
In the house, this unit copes with the necessary supply of natural water. True, at the same time you will not be able to calmly bathe in the bathroom, wash the accumulated dishes and wash, as the pump only produces up to seven liters per minute.
But if you use it skillfully and economically enough, then it will be enough to take a warm summer shower and wash the accumulated things. Water pressure directly depends on the depth of a particular water resource. The larger the number, the smaller the feed, respectively.
It is undesirable to connect the pump to your country house, bathhouse and other important outbuildings at the same time, as an unwanted automatic reboot of this system may be caused.
Pump replacement
Some private owners of country houses, who use more powerful and expensive equipment in their home water supply, buy this budget pump as insurance. After all, absolutely anyone, even the best imported device, can break down, and until you repair it from specialists and get it back, a lot of time will pass.
And in any case, the pump will come in handy on the farm. And then, to meet the vital needs, it is the "Brook" that will come in handy for you.It is a kind of lifesaver for the owners of country houses and will not leave you alone in difficult trouble, which are so many in the daily life of every person who owns a country house.
Application in a slowly filling source
When carefully digging a well or well, it is difficult to guess in advance how quickly the proper water level will be restored with repeated use. One source will do it instantly, and the second will need long days for the long-awaited update.
But when buying a device, few people think about it, and it happens that the unit very quickly pumps out water rather than replenishes it. In such a situation, the system may shut down automatically and require a prompt restart. With a quick intake, the chances of getting muddy water increase.
It is best to take the Brook, as it works more stably and has a low intake intensity.
How to successfully restore a clogged well?
You can develop a system using the "Brook". The quality of water, of course, will not change, but the volume will increase significantly, you will immediately notice this for yourself.
Turn on the pump and lower it as close as possible to the required filter. Thanks to the vibrating mechanism, numerous layers will be knocked out, and then rise to a flat surface. Several such successful attempts, and the well will begin to come into full order.
During operation, it is not necessary to stand right next to your well. In any case, the water pump will not completely pump out the water. So you can take care of your accumulated household chores. For example, you can water a country garden. You will immediately notice if the water quality and volume change.
Pumping water from flooded premises
In the spring, basements and cellars are very often flooded with summer residents. Carrying out water with the help of small buckets is very problematic and takes a lot of precious time. Here you will be perfectly helped by a pump with good quality from a Belarusian domestic manufacturer.
New heating system
When building a new house, the heating system is done first of all, rather than connecting to the water supply. You need to somehow fill all the pipes.
The scheme is as follows: you bring water in a huge barrel, insert this pump into it, and connect the second hose to the drain valve of the battery. Next, the tap gently opens and this unit starts. While the system is carefully filled, look carefully at the special pressure gauge in order to determine when the pressure is at the mark you need.
Vibratory submersible pump Stream models and analogues
The use of "Brook" as a drainage device
It must be borne in mind that if the equipment is not used for its intended purpose, this will significantly reduce its service life. Malfunction of the pump can be caused by sand and small stones entering the mechanism. The power of the "Brook" can easily cope even with pumping out drainage, melt water and replenishments with medium pollution. But it is worth taking care of purchasing a filter for additional protection.
The pump is immersed in this filter as in a glass. There are many different types of protective covers. The most common are rubberized covers that are pulled over a heated pump.
Pump repair
Since the pump is not expensive, often many simply refuse repair work and simply purchase a new one. But basically this device is perfectly repairable for a small fee. Repairs can be done on your own by cleaning the parts from dirt and replacing the gaskets. Of course, there may be slight difficulties when disassembling the device. Rust covers the mounting bolts, and it is not so easy to unscrew them.
Models and analogues
There are three models of this pump on the market - this is the pump "Rucheyok", "Rucheyek-1" and "Rucheyek-1M".Their design is similar, but there is a difference. So, in the model "Streamlet-1" a system of upper water intake is installed, which contributes to obtaining the purest water. And "Stream-1M" takes water from the bottom hole. This is the model most suitable for pumping tanks that need to be completely emptied.
The Brook pump is very popular. This is due to the fact that it has a relatively low price and a fairly high quality. And also the submersible pump is very easy to operate. It doesn't need any settings before it works, you just need to press a button and it will work. When purchasing the Brook pump, specify immediately what length of the electric cable that is included in the kit. The set of standard models may include a cable of 10.15, 25, 40 meters in size, which also affects the cost of the device.
In modern models of the "Ruchek" pump, there is a special sensor with the property of determining the temperature and the function of shutting down when the device reaches a critical point. This situation is possible if the pump is without water. This dry running protection can prevent damage and prolong pump life.
