Do-it-yourself septic tank without pumping. Quick Guide
Before starting the construction of a septic tank for a private house, you need to make a simple calculation of its capacity. Sanitary standards require that the volume of the chambers of the treatment plant provide 3-day settling of water. Therefore, the average rate of water consumption by one person per day (200 liters) must be multiplied by a factor of 3. So we get the required volume of a septic tank for the disposal of wastewater coming from one person permanently residing in the house: 200 x 3 \u003d 600 l.
Further calculation consists in multiplying the resulting figure by the number of sewer users. For example, for a family of 4 people, a septic tank with a total volume of 2400 liters (2.4 m3) will be required. We recommend choosing a depth of at least 2 meters for the septic tank. A shallow tank fills up with sediment faster and needs to be cleaned more often.
Having decided on the volume and depth of the tank, you can start earthworks. Please note that the volume of soil to be removed must be equal to the estimated capacity of the septic tank plus the total volume of its concrete walls and bottom!
Having taken out the soil, they begin to lay the reinforcing mesh on the bottom of the pit. Pieces of bricks or stones must be placed under the mesh to create a protective layer of concrete for the metal with a thickness of at least 5 cm. It is desirable that the ends of the reinforcement extend to the vertical walls of the pit by 10-15 cm. This will prevent the joints of the concrete bowl from cracking.
The bottom is filled with concrete, it is given 3-4 days to gain strength. After that, they begin to install panels of vertical wall formwork and partitions between the chambers. A reinforcing mesh is placed in the space between the shields, and holes are cut in the shields to pass the inlet, overflow and outlet pipes.
Please note that the level of the lower cut of the inlet sewer pipe should be several centimeters above the overflow between the chambers. The installation level of the pipe leaving the septic tank must be equal to the level of the overflow pipe. Having installed the pipes in the prepared holes, the walls are concreted.
For compacting concrete in formwork, it is best to use an internal vibrator. In the absence of this tool, you need to manually "stitch" the mixture with a thick reinforcing rod for better compaction.
A drainage trench is dug with a slight slope from the septic tank (3 cm of slope per 1 meter of surface). Its dimensions should be larger than the diameter of the perforated pipe so that there is room for crushed stone backfill (fraction 10-20). After filling the lower part of the trench with gravel (layer thickness 15-20 cm), a layer of sand 5 cm thick is poured on it. After that, a perforated pipe is laid, wrapping it with geotextile. This material is needed so that the holes are not silted up with soil particles. After laying the pipe, the trench is filled with crushed stone, covered with geotextile on top and covered with earth.
Deciding to do do-it-yourself septic tank, think about the design of its "lid" - a concrete slab. We recommend using the proven option, the scheme of which is shown below.
Having bought a sheet of corrugated board of a suitable size, it is laid on the concrete walls of the septic tank. In order for the sheet not to bend under the pressure of fresh concrete, reinforcing bars are laid on it. Each of them must be tied with steel wire to the corrugated board at several points, passing it through the holes previously drilled in the sheet.
In a two-chamber septic tank, two hatches for cleaning must be provided. Frames for them are made from a corner and welded to reinforcing bars. A hole for a ventilation pipe (100 mm) in the secondary chamber can be made in the manhole cover.
Laying highways
Mounting technique:
- the main riser of the sewer system is mounted at a distance of 4-5 meters from the windows;
- next comes the laying of horizontal structural elements;
- special hatches control the condition of the integral pipeline and high-quality cleaning;
- under the toilet, in the lower part of the structure, it is necessary to place revision compartments;
- the turn of the trunk branch should be a right angle (90 degrees);
- because of this, drains will be discharged evenly, without clogging the corresponding pipes;
- equipment for plumbing is selected with the necessary siphon;
- a pipe should be connected directly to the toilet connection;
- a water seal is used to prevent the spread of unpleasant odors from the system.
The sink is connected with a pipe 50 millimeters in diameter, to check the quality of water movement. For the bath, the fasteners are identical to those with the sink. To bring the pipeline to the street, you need an exit through the foundation and this is an important point. If there is a problem in connecting the inner sewer pipe to the central one, then the organization of the sewer septic tank begins.
Works on the launch of sewerage without pumping out according to all standards
The start of operation of the structure begins after a complete check of the tightness of all seams. The normal operation of the sewer system is checked by checking two points:
- no characteristic smell of hydrogen sulfide;
- the filling of the filtration compartments occurs immediately after the waste enters the sewer communications.
If during the construction all the rules and regulations were strictly observed, then the assembled structure with its own hands effectively copes with the task - the removal of sewage (drainage water). To accelerate the sedimentation of the soil mass, you need to use a reagent for biodisinfection.
Related video: Eternal sewage without pumping
A selection of questions
- Mikhail, Lipetsk — What discs for metal cutting should be used?
- Ivan, Moscow — What is the GOST of metal-rolled sheet steel?
- Maksim, Tver — What are the best racks for storing rolled metal products?
- Vladimir, Novosibirsk — What does ultrasonic processing of metals mean without the use of abrasive substances?
- Valery, Moscow — How to forge a knife from a bearing with your own hands?
- Stanislav, Voronezh — What equipment is used for the production of galvanized steel air ducts?
Approximate prices for the services of a vacuum cleaner
When ordering the pumping of a septic tank or a cesspool, you need to provide the contractor with data on its volume and location. This will allow you to select a tank truck of the optimal volume (from 4 to 15 m3) and supply it with a hose of sufficient length (up to 50 meters).
The estimated cost of pumping out 1 m3 of a septic tank for 2016 is 850 rubles. Some firms use a "flexible" price tag for the removal of sewage. In this case, the minimum price of 850 rubles per cubic meter is set for pumping at least 13 m3. With a smaller volume, the tariff increases to 1300 rubles/m3.
The factor of remoteness of the customer's object from the contractor's production base affects the price formation. The average rise in price is 50 rubles. for every kilometer outside the city limits. The amount received is added to the total cost of pumped "cubes".
Some companies, in order to attract customers, set a low tariff for the removal of 1 m3 of sewage (500-600 rubles). At the same time, in their price tags there is a “minimum order” item. It is equal to the full capacity of the called tank truck.
The length of the hose is another possible cost factor for the service. As standard, the machine is equipped with a 6-meter sleeve. If it does not reach the septic tank or cesspool (according to your calculations), then for every additional 6 meters of hose you will have to pay at least 500 rubles.
Self cleaning tank
Popular among owners of small private houses and summer cottages. Cesspools in these cases have an elementary device and a small volume, so calling heavy special equipment in this case is completely impractical. The following are ways to manually clean cesspools.
Attention! The gases that accumulate in the sewage tank are deadly to humans! In no case should you inhale them, this can lead to very severe poisoning. All further actions are performed exclusively in a special respirator, which is designed to filter the air from hazardous substances
Pumping sewer with the help of special equipment
Everyone knows the name of a machine that pumps out liquids - a sewage machine. The car collects and takes out liquid household waste. The machines that are usually called can be of several varieties, which belong to one of three types:
- sludge suction machines;
- vacuum machines;
- combined machines.
Depending on what equipment for the car can be used, the method of pumping out the liquid is determined. The most popular are:
- Cleaning with an ilosos. The most popular and inexpensive way to pump out the sewer. At low temperatures, the use of this type of equipment is also possible due to the possibility of heating. Performance may vary.
- hydrodynamic method. The work is carried out in three stages: pumping out the drain, filling the tank with water, re-pumping. Heating is possible.
- Vacuum cleaning. This method can only be used with a vacuum pump. This type of sewer pumping machine can be used in almost any conditions. A certain distance from the place of purification is possible. The most versatile type of technology.
All types of machines are equipped with hoses, the length of which reaches 15 meters. This is not always enough to get the job done. The owner of the car, who is interested in its versatility, can equip the car with an additional hose. The possible loss of power is compensated by a longer operating time for each specific operation. If the distance to the object is more than 25 meters, it is possible to install a powerful vacuum pump on Kamaz.
Pumping out a septic tank
Frequency and options for pumping septic tanks
An urgent question that worries every owner of a manor and a summer residence is how often should a septic tank be pumped out? It is impossible to answer it unambiguously, since the frequency of emptying the cesspool and septic tank depends on a number of factors:
- Tank capacities.
- Regular use of sewers.
- The number of people living in the house.
To date, there are two options for cleaning septic tanks:
- The use of a sewer machine.
- Self pumping.
The first method is used most often. Having ordered a cleaning service, the owner only needs to meet the car and control the process. The second way is more complicated and unpleasant. If you decide to use a fecal pump to empty the septic tank, then you will need a container to drain sewage. After filling, it will need to be taken to a disposal site designated by local authorities.
Those who are just going to equip a septic tank should choose the right location on the site. It is best to place this structure close to the fence so that a standard tank truck suction hose can easily reach it. This will save you money when ordering a car.
What does a sewer machine do
Living in your own home, which has an autonomous sewer system, needs the services of a sewer when the drain pit overflows. An overfilled septic tank makes it difficult for the entire system to work and contributes to its rapid failure. A family of several people calls a cesspool truck an average of three times a year. Pumping out does not cause difficulties when there is free access of the machine to the drain pit.
Pumping out the contents of a septic tank is not the only use of a sewage machine. For example, it is successfully used when carrying out repair work on sewer and water systems.It is also possible to simply pump out hot or dirty water from the cellar or basement.
The car tank can be used for transportation of technical and industrial liquids, in particular, oil and oil products. Only the transportation of dangerous chemicals is impossible.
The services of special equipment may be needed by sanatoriums, cafes, swimming pools and other organizations whose activities are associated with mass visits of people. Sewerage pumping is a highly demanded service.
Pumping out sewerage in a private house
Installation of a pipe for pumping water from a septic tank
In order not to depend on the length of the sewage hose, a pipeline is laid from the treatment plant, which allows the removal of effluents. In this case, the pipe for pumping out of the septic tank must correspond to a certain type and technical parameters.
In the process of pumping liquid, a negative pressure or, in other words, a vacuum is created inside the pipe. At high vacuum, the pipeline tends to compress, and in this situation the reliability of the system will depend on the strength of the material used and its suitability for work in such conditions.
Conventional gray sewer pipes that are used for indoor installation have a wall thickness of 2.2 mm, which is insufficient for operation under pressure or vacuum. Therefore, such a pipeline is used exclusively for non-pressure systems.
So what kind of pipe is needed for pumping out a septic tank? For such purposes, special pressure pipes with increased wall thickness or an orange PVC pipeline, which is intended for outdoor placement, should be used.
Orange pipes have a multilayer structure, which increases their strength and reduces thermal conductivity.
The diameter of the pipeline must match the size of the suction hose. Theoretically, the size of the pipe for pumping water from a septic tank can be smaller. However, it should be borne in mind that in this case the pump will need more effort to create the necessary pressure, and it will work with an increased load.
Since the suction machine hose diameter is usually 100-104mm, it is preferable to use 110mm PVC pipe. The annular space can be closed with a wet rag or an adapter can be used to tightly connect the pipeline and hose.
Pipe laying must be carried out taking into account the following rules:
- The pipeline is laid at a shallow depth from the septic tank to the roadway. The slope is towards the septic tank.
- The pipe cuts into the septic tank at a depth of about 1 m and, with the help of a corner, turns down, resting with an oblique cut (45 °) against the bottom.
- The exit to the street is realized using a 90 ° corner, which is located in a small pit near the proposed entrance of the sewer truck.
A pit with a pipe for pumping out a septic tank is usually located near the road.
Such a system will allow the removal of liquid waste even with a significant distance from the septic tank from the roadway. In this case, the pipeline does not need to be buried below the freezing level of the soil. Firstly, it is filled with liquid only during the pumping process, and secondly, pipes for external sewerage calmly endure low temperatures.
This article provides general recommendations for the installation of a pipe for the removal of liquid effluents. If there are specific conditions for the operation of an autonomous sewage system, it is better to additionally consult with specialists.
The use of special equipment for cleaning sewers
Its use is still necessary for the periodic cleaning of old and caked sediments, because their accumulation leads to overflow of tanks that cannot be removed manually, even fecal pumps cannot cope.
Hydrodynamic cleaning
A good way for high-quality removal of dense sediments.A jet of water is fed into the tank under huge pressure, which breaks the bottom layer and mixes it with the total mass, in parallel with this, we pump the tank into a movable tank.
At the end, we get a completely washed and completely empty well. For prevention, you can examine the integrity, insulate the cracks that have arisen over time, rinse the sewer pipe.
vacuum pumping
Special pumps have enormous power, which is capable of pulling the entire contents of the tank under enormous pressure into an intermediate container for subsequent disposal. A universal way to clean all types of cesspools - profitable, fast, efficient, although not leaving such cleanliness as in the previous method.
The special equipment that was described above is installed on sewage trucks. These are such trucks that are equipped with a sealed sewage collection tank, hoses and a set of pumps, some are also equipped with good shredders of random household waste.
Such machines will quickly and efficiently deal with any amount of wastewater, as well as carry out comprehensive care of the inside of the tank and the sewer pipe that discharges. The regular call of a vacuum cleaner can hit the pockets of the owners of small houses, so they try to cope on their own.
The cost of work is directly affected by:
- The total way of ordered services;
- The volume of wastewater to be removed;
- Possibility of car access directly to the tank opening;
- Remoteness of the house from the city.
It is recommended to order a machine with a tank so that the pumping out of the sewage can be done at one time, it is much cheaper than pumping out the hole a little at a time. A single-chamber pit is cleaned approximately once a year, while a multi-chamber system can operate without intervention for up to three years.
Components of an autonomous sewerage system
Basically, sewer designs without pumping out require regular maintenance and cleaning. To avoid these not entirely desirable actions and the frequent call of special employees with the appropriate equipment, installation work is carried out to install storage tanks without this drawback.
Often a sewerage system is installed without pumping, it provides for the construction of a septic tank. And before performing work, it is imperative to familiarize yourself with the details of the operation of the components of an autonomous sewer system. It basically consists of a list of subsequent main components.
- Storage tanks (reservoirs).
- Shafts for ventilation are needed in each capacity of the system.
- Hermetically sealed hatches.
Storage tanks interconnected by pipes (as a rule, plastic pipes are used). And the first tank must be filled no more than 75%, and the second tank, respectively, 25%. Each of the tanks has two or three chambers.
Only in complex use can these components ensure the efficiency of sewage removal and the high-quality elimination of unpleasant odors of hydrogen sulfide.
Installation of a septic tank of various options
After choosing the installation site for the country sewerage system, you should start digging a pit for a septic tank.
Septic installation scheme
Make the dimensions of the pit a little larger (20-30 centimeters) than the installation itself. This place is needed to simplify installation and efficient backfilling.
After backfilling, it is important to carefully compact the sand. If the groundwater level is too close to the sewer system, then simply lay a concrete slab on the bottom of the pit or fill it with a solution of cement and sand
You can make a pillow out of gravel.
With a low occurrence of groundwater, a sewer system based on concrete rings can be installed. Their feature lies in super strength.Making a sewer without regularly pumping out the contents is a rather expensive process. But it will pay off in the course of use - they are durable on such terrain.
Progress:
Sewerage facility capable of functioning without pumping
- from the pit they dig a trench for the pipeline;
- also dig areas for the infiltrator;
- when digging all trenches, you need to take into account the angle of inclination (1–2 degrees), for better water flow.
If the finished container is being installed, then along with the documents there is an installation instruction, carefully read it and only then proceed to work, strictly following the rules.
As for the installation of formwork for sewerage, then everything is extremely simple:
Thus, the beginning of the central system and the overflow channel are formed. Further, the formwork is completely poured, at one time, with a concrete solution evenly distributed over its entire surface. You need to remove it only after 1-3 days, it is also not recommended to keep it longer.
How often should a septic tank be pumped out?
The use of a septic tank is considered the best solution for arranging an autonomous sewerage system in a country house. Such a treatment plant can easily cope with the collection and processing of solid waste. At the same time, insoluble compounds gradually accumulate in the sump, which from time to time have to be removed.
Independent disposal of liquid waste is used quite rarely, given the complexity and danger of this event, as well as the need to dispose of pumped out effluents. Therefore, in this situation, it is more advisable to use the services of professional vacuum cleaners. On average, a car is called 1-2 times a year. In this case, the frequency of pumping depends on factors such as:
- volume and model of the septic tank;
- the number of permanent residents;
- intensity of sewer operation;
- composition of household waste.
Pumping out the septic tank must be done in a timely manner, preventing overflow of the tank
Bacteria biologics for septic tanks
Bacteria that accelerate the process of decomposition of organic waste are divided into two types:
- Aerobic (they need oxygen to live).
- Anaerobic (live in a liquid environment without oxygen).
Aerobic microorganisms work more efficiently than anaerobic ones. However, they require oxygen. Anaerobic are less voracious, but can exist in an airtight volume of liquid.
We have provided this information for your information. The buyer of bioconcentrates does not need knowledge of microbiology. Manufacturers indicate on the packaging where the drug should be used (septic tank, autonomous toilet, cesspool, compost heap).
The process of introducing microorganisms into the treatment plant is very simple. The liquid preparation is poured into the toilet and the water is flushed. Dry stir in 5 liters of warm water and send to the septic tank in the same way.
Approximate prices for liquid biological products from 500 to 700 rubles/l. One package of septic tank cleaner is designed for a volume of 2 to 10 m3. The frequency of application is from 2 to 6 months.
How to know when it's time to pump out a hole
Pumping time depends on the type of cesspool itself:
- If the tank is built in accordance with all the rules of an autonomous sewage system: it consists of two interconnected tanks connected by an outlet pipe (one sealed and the second with a filter layer). In this case, to determine the pumping time, you need to check the level of deposits in the pit with an ordinary wooden stick. The stick, the length of which should be at least the height of the tank, must be lowered to the very bottom, then removed and visually determine the level. It should be no more than 1/3 of the depth. The operation of the sewer system is possible without restrictions. Exceeding the level of thick masses, reaching almost to the outlet pipe, is an indicator for stopping the use of the septic tank and cleaning it.
- The sealed container requires the termination of operation when it is completely filled. This can be determined visually by simply looking into the tank.
Pumping frequency
The frequency of the procedure depends not only on the type of pit, but also on its volume, as well as the degree of load. For example, a small reservoir located in a summer cottage, which is used very rarely, can be cleaned every 6 months. A small pit of constant use, it is recommended to pump out every month.
It is not uncommon for the filling rate to start to increase, and pumping out is required more and more often. The reason may be:
- insufficient maintenance of the sewer system: rare cleaning, which leads to the formation of a massive layer of hard deposits;
- silting of the drainage layer;
- winter period - freezing of the soil, the reservoir itself;
- spring-autumn periods - raising the level of groundwater.
The most common cause is silting, as a result of which water accumulates in the pipeline. It is possible to determine the contamination of the cesspool, the need for pumping out, not only by the frequency of its filling, but also by the appearance of an unpleasant odor in the adjacent territory.
You can solve the problem of filling the cesspool by pumping out accumulated sewage, washing the walls and bottom, treating it with chemicals, or replacing the drainage layer.
Fecal pump
The most common and cheapest way to manually pump out sewers in a private house.
Fecal pump
It will be beneficial to purchase a special pump worth about 5,000 rubles. It is also possible to use a conventional water pump, however, the above method has several advantages:
- Such a pump is designed to operate in an aggressive chemical environment - all its elements are protected from corrosion and corrosion.
- It has more durability than options for pumping uncontaminated liquids.
- Due to the specificity of the work, large particles do not damage important components and mechanisms of the pump.
- More expensive models are equipped with a special grinder, which interrupts all incoming substances into a single monotonous mass.
- These pumps have a relatively large capacity and are even less susceptible to damage from large particles.
This method has one significant drawback - even the most powerful models are unable to pump out settled heavy particles from the tank, removing only the surface layers and active fine sediment, so that the call of the sewer can be postponed for at least a few years.
How to make a cleaning system right
Two-chamber sewer without pumping from concrete rings
The main advantage of the mechanism is in the processing of sediment by anaerobic organisms (bacteria). After processing, the sediment at the bottom in a much lower concentration. After periodic compaction of the sediment, it will rise up. When the seal approaches the overflow line, the septic tank is immediately cleaned mechanically. This cleaning will have to be done quite rarely.
Recently, biological preparations for the country sewerage system have become popular. They contain special enzymes, they are able to process the sediment into methane, to use these drugs you just need to install additional ventilation.
In the first tanks, wastewater filtration processes take place, and in the last tank, the purified water is completely drained into the ground.
Bacteria living in a septic tank need to be "fed" with oxygen. Tanks for a septic tank can be bought ready-made or you can make your own at home.
Septic without pumping. Reality or fantasy
The dream of any home owner without a central sewer is a septic tank that does not require pumping. Let's say right away that unattended structures do not exist. A septic tank without pumping is called a design in which the frequency of sediment extraction is 1 time in several years.Moreover, bottom sediments in it are absolutely safe both in bacteriological and chemical terms. Therefore, they are not taken to the landfill for disposal, but are used on the site as a biofertilizer.
How is such a long service life achieved? The secret lies in its design and the use of bacteria. We briefly mentioned the design features of septic tanks at the beginning of the article. Therefore, we will now say a few words about the significance of the bacterial factor.
Thanks to the addition of a special concentrate of bacteria to the water of the septic tank, the natural process of decomposition of sewage is accelerated hundreds of times. As a result, the water comes out quite clean and suitable for irrigation. The removal of a large volume of fecal effluents is not needed here. Therefore, maintenance of a septic tank without pumping out does not require the call of vacuum trucks. It comes down to infrequent (1 time in 2-3 years) removal of sediment.
Having decided to build an autonomous treatment plant on his site, the owner can count on a “double size” win:
- no need to pay for the rental of a sewage truck;
- bottom sediment - free fertilizer for plants.
Types of pipes used for the country sewerage system
Based on the drawn up scheme for the possible location of plastic containers, they begin a set of works on the installation of pipelines. The first stage is the process of attaching a centralized riser, with a diameter of 110 millimeters. The removal of gases occurs through specialized ventilation branches. Pipes can be selected from different materials (divided by cost, quality and term of use).
There are three types of pipes:
- PVC;
- cast iron systems;
- ceramic.
PVC pipes - resistant to organic and inorganic chemicals, not prone to rust processes. A distinctive feature is that, due to the smoothness of the surface, plaque does not form inside, and sewage is removed quickly and efficiently. Fixed using a specialized technique.
PVC pipe size chart
Cast iron systems, in terms of cost ratio with PVC pipes - this system is much more expensive, but these costs will be justified. Reliability and durability guaranteed. A team of specialists works for the installation, since the pipes themselves are very difficult to install on their own.
Ceramic parts are made from clay, with a mandatory firing process. Wear and tear of waste pipes, heat resistance index - these facts determine the high price of the resulting product.
Pumping without a pump
In this case, ordinary buckets are used, with which the contents of the tanks are manually taken out. In addition to a respirator, here you need old but durable clothes and gloves that will cover all open skin areas.
Protective kit must protect all exposed body surfaces
It is also necessary to arm yourself with a strong long rope, one end of which is tied to the handle of the bucket, and the other (if the length of the rope allows) - to a strong post or tree - so you definitely will not drop the bucket with the rope into the abyss of sewage.
Here it is time to talk about where it is necessary to pour the pumped out waste. For these purposes, mobile tanks are used, the contents of which are then sent for disposal.
This method is the cheapest, does not require almost any investment, however, the effectiveness is very doubtful - only the top layer of the accumulated mass is removed. A lot of time is spent compared to the pump.
Cesspool pumping
The principle of operation of the sewage system without pumping
All impurities are removed and accumulated in the first tank. It performs the initial mechanical cleaning. Cleansing occurs from light and heavy particles, they respectively float or settle at the bottom of the tank.
Floated, light, particles at this stage are removed into the second container.The filtration process takes place there and after it they are completely removed by moving to the wells (there may be one or several).
To prevent the penetration of sewage into surface groundwater, onto the land, each chamber of the sewerage system must be absolutely tight. As an exception, the last compartment, small slots are made at its bottom. Their main purpose is to remove solid precipitation and excess moisture.
The principle of operation of sewage without pumping
Precipitation can be prevented using certain methods:
- eliminate the possibility of solid particles entering the storage tank;
- control the withdrawal of inorganic products into septic tanks;
- reduce the access of chemical products to sewer communications.
With the strictest observance of the rules for the effective use of plastic containers, it is possible to extend their work for several decades, without using the services of specialized companies to repair such systems.
Cost of work
When cleaning a septic tank on your own, the costs of buying a barrel for pumping out and a pump are included in the calculation of the cost of work. When using a vacuum truck, the cost of services consists of such factors as:
- Plot locations. The further away the place of work, the higher the cost of services of special equipment.
- The volume of the tank. The larger it is, the more drains the machines can pump out at a time, which means that there is no need to call two machines. This is a significant cost savings.
- The location of the pit on the territory of the customer. If it is not possible to drive close, it is necessary to use an additional hose and a more powerful pump. This increases the cost of the work.
- Time to call the car. The use of equipment outside working hours, for example, in the event of an accident, is more expensive.
Conclusion
Do-it-yourself pumping and cleaning of tanks is only beneficial for small cesspools. This method takes a lot of time, the work is very dirty, plus everything needs to be taken care of finding an intermediate tank for draining and transporting it to the waste disposal site.
The vacuum cleaner works quickly, silently, has its own tank, is equipped with equipment for comprehensive well care. By choosing the services of a trusted company, you guarantee yourself a quick disposal of a mass of wastewater - clean, quiet, high quality and safe.
Related video: Pump Brook
https://youtube.com/watch?v=Uu0lDciGQ-M
A selection of questions
- Mikhail, Lipetsk — What discs for metal cutting should be used?
- Ivan, Moscow — What is the GOST of metal-rolled sheet steel?
- Maksim, Tver — What are the best racks for storing rolled metal products?
- Vladimir, Novosibirsk — What does ultrasonic processing of metals mean without the use of abrasive substances?
- Valery, Moscow — How to forge a knife from a bearing with your own hands?
- Stanislav, Voronezh — What equipment is used for the production of galvanized steel air ducts?
