Choosing a model and installing a septic tank Ergobox

General information about the Ergobox septic tank

The manufacturer of the Ergobox septic tank is the Multplast company. A septic tank can be in modifications of different capacities and for a different number of residents.

Advantages

The product made in this way has a high resistance to chemicals and impact resistance. Also on the product there are no seams, scratches and any damage inherent in products made by other methods.

All models of Ergobox stations have the value of electricity consumed, on average, one and a half kilowatts per day. The length and height of the hull is from two to two point two tenths of a meter, and the width is 0.785-1.2 m. There are no specific standards, the dimensions of this design are selected by the manufacturer independently.

Modifications

The model range of Ergobox septic tanks is presented with the following capacities - 1000, 1300, 1600 and 1900 l / day.

All capacities are available in 2 modifications:

gravity septic tank with the designation S, used for ordinary soils;
forced ejection - PR, suitable for areas with a high level of groundwater penetration.

In the smallest dimensions, the Ergobox 4S septic tank is presented, designed to process wastewater up to a thousand liters per day for a family of four members. The most powerful stations are Ergobox 10S and 10 PR, up to one thousand nine hundred liters per day and ten residents.

General characteristics

According to the reviews of the owners who installed the Ergobox septic tank, it is unpretentious in operation and highly productive. This modern deep aerobic cleansing device is suitable for both a country house and a large cottage. During installation, there are no difficulties, and the total weight of the structure is not more than one hundred and fifty kilograms. Installation can be done even by one person.

The manufacturer offers a video instruction on installing a cleaning station, as well as a detailed description of all the advantages of the unit.

Another important parameter of the Ergobox septic tank is peak discharge. These local purification systems can have from one hundred and eighty to five hundred and fifty liters per hour. The value of this parameter corresponds to the volume of wastewater that the septic tank is able to process at a time.

For your information: The value of this parameter will be higher, the longer the period of residence in the house. Before purchasing an appropriate septic tank, it will be necessary to accurately calculate the water consumption.

Benefits of the Ergobox cleaning station

There are models for any type of soil,
Does not harm the environment
Wastewater treatment up to ninety-eight percent,
Long service life up to fifty years,
Affordable price,
Energy-dependent mode of operation. This mode is convenient in case of a decrease in the number of residents,
The case is ergonomic, and the design is thought out to the smallest detail,
Immediately after installation it is ready to work. Can be installed even in areas with high groundwater levels, the structure does not move in the ground,
Uniform distribution of effluents over the inner surface of the tank,
Easy installation. It does not require digging a huge pit or the use of equipment,
The station is very easy to use. To clean the device from silt, use an ilosos by placing it inside,
Since the design is seamless, there are no leaks or blockages,
Does not need an additional irrigation field.

Flaws

The Ergobox septic tank has a minus, which consists in the necessary careful observance of all technologies when filling up a local cleaning system.

If a mistake is made at this level, then damage to the hull is possible. Plastic walls with improper installation work can be deformed or cracked. Also, somewhat slower processes of filtration and purification of wastewater due to the multi-chamber design.

Ergobox maintenance is quite simple. To clean this device, it will be enough just once every few years to use a vacuum cleaner or the services of a sewage machine. But if this is not done in a timely manner, then there may be violations of work efficiency.

Selecting a biological treatment plant

The main criterion for choosing a septic tank of appropriate capacity is the number of permanent residents. For ease of selection, the manufacturer has created a table that shows the models of each capacity and recommendations for the number of residents.

Principle of operation

In essence, Ergobox is a local anaerobic treatment plant, although it is often called a septic tank. A distinctive feature of the station from a septic tank is energy dependence, as well as the highest quality water treatment and the absence of the need for frequent pumping. The septic tank is made in the form of an elongated tank with a neck. The polyethylene case is sealed without seams, and is also equipped with stiffening ribs. It is very durable and does not deform.

Consists of five chambers

Receiving capacity with function of a filtration of a large deposit;
Sludge tank;
Clean water sump;
The control block located at a mouth with the compressor.

In another tank, microorganisms come into contact with wastewater. The aerotank is the place where the main process of processing organic substances by microorganisms takes place. In the third chamber, activated sludge settles to the bottom, which is then sent back to the first tank by the action of a circulation pump.

The principle of operation of the septic tank is as follows: Waste water enters the first tank. Here biological purification takes place under the action of bacteria that are in the sludge. Then the waste masses, passing through filtration, pass into the second container, called the aerotank.

In this chamber, the waste liquid is saturated with air, which the bacteria need to carry out their activities, i.e., aeration occurs. The third reservoir is where the gravity sediment separates. Waste masses are divided into liquid and sediment in the form of active sludge deposits.

Then light water passes into the 4th tank, and under the action of a special deposit, activated sludge is pumped into the first tank. In the fourth chamber, the liquid finally settles. 5 container is arranged at the top in the neck. It is accumulative, from where purified water is pumped out.

Ergobox septic device installation

It is quite possible to do it yourself. The finished factory design is simply installed in a prepared place and pipes are connected.

You just need to follow the following simple instructions:

First you need to inspect everything, make sure there are no malfunctions.
The pit is being dug. It is necessary to leave a distance of about 25 cm from the outer wall of the device. The depth of the pit is about two and a half meters.
The bottom needs to be level. The permissible horizontal deviation should be no more than one centimeter.
Dig a trench for the pipeline. The inlet trench should be at a slope of at least two centimeters for gravity draining.
A layer of sand from twenty to thirty centimeters is poured at the bottom of the trench.
Immerse the device directly into the pit.
Next, backfill is carried out using a mixture of cement and sand in a ratio of one to five. Falling asleep should be done in stages with tamping every twenty centimeters.
Simultaneously with the backfilling process, it is necessary to gradually fill the tanks with water, the water must be higher in level than the backfill. All containers must be filled at once in order to create equal pressure on the walls of the tank from the outside and from the inside. If there is a need for insulation from above the local station, foam plastic can be used, and it is already completely buried, leaving one hatch.

For your information: The manufacturer offers services such as "turnkey installation" or "Installation supervision" - do-it-yourself installation of a septic tank under the supervision of a master.

Ergobox installation

There should not be any particular difficulties with the self-installation of a septic tank of the brand in question. This is not a do-it-yourself strip or column foundation. With the Ergobox station, everything is much simpler. The factory-ready design should simply be put in place and pipes connected to it.

First, a foundation pit is dug with a depth of 2.5 m. Two meters is the height of the station with a neck. Plus 50 cm on a compacted sand cushion from below. On the sides, the pit should exceed the dimensions of the body by 25 cm.

The bottom of the pit is leveled and a treatment plant is installed there. A sewer pipe from the house is connected to it and a branch pipe is removed for the drains that have been cleaned.

Backfilling is carried out layer by layer with a cement-sand mixture (1:5), 20–30 cm each, with tamping of the layers and gradual pouring of clean water into the chambers of the station. From above, if necessary, VOC is insulated with foam plastic and finally buried so that only the hatch remains above the ground.

Description and principle of operation of a septic tank

Externally, the Ergobox septic tank is made in the form of an elongated container with a neck on top. The seamless sealed body of the station is made of polyethylene and has stiffeners. It has high strength, which eliminates deformation even with strong heaving and high groundwater level.

Type Ergobox

Inside, the Ergobox septic tank is divided into five sections:

Receiving chamber with filter of large fractions.
Aerotank with forced aeration.
Chamber of gravitational sedimentation of silt.
Block-dampener for sludge of purified water.
The control unit with the compressor located in a mouth.

Scheme and principle of operation of the Ergobox station

The contact of aerobic bacteria with sewage water occurs in the Ergobox septic tank in the first chamber. The main process of eating organics by them takes place already in the aerotank. And the third chamber serves to settling activated sludge to the bottom, from where it is sent back to the first section by a circulation pump.

Product range Isobox

Due to the technical characteristics of Isobox mineral wool, it is widely used in the construction of civil and industrial facilities, and is also used in the manufacture of equipment and mechanical engineering. Due to the wide scope of use, for convenience and for full technical compliance, Isobox mineral wool is produced in an assortment in the form of rolls, plates and mats.
The Izobox model range consists of the following types of modifications:

General construction line Isobox LIGHT and Isobox EXTRALIGHT
Mineral wool of this type is used for warming apartments, country houses, summer cottages and outbuildings. The thermal conductivity of the type modification is 0.039-0.042 W / (m K) λ25, density 30-38 kg / m.cub. and vapor permeability within 0.3 mg / (m h Pa) provide an opportunity for mineral wool of this level to be used in the insulation of construction sites throughout the Russian Federation. The material belongs to the class of fire safety NG. At the construction site, thermal insulation products are delivered in vacuum packages; when packaged, the mineral wool is straightened, taking on natural dimensions and a certain thickness (5-10 cm).
Facade line Isobox INSIDE, Isobox FACADE and Isobox VENT
For heat and sound insulation of ventilated facades, Izobox INSIDE, FACADE and VENT fit all technical parameters of construction projects. Cotton wool has a high density (45-80-150 kg/m3) and low thermal conductivity (0.036-0.045 λ25 W/(m K)) providing an excellent barrier to cold from the outside and creating a comfortable indoor microclimate. The lightness of the material does not burden the load-bearing structures, and the dimensional parameters of 100x50cm and 120x60cm make the installation process quick and convenient. Cotton wool from fibers of basalt mountain stones is cut with a knife, acquiring any shape.
Roof line Isobox RUF, Isobox RUF H&B
These products are widely used by industrial and civil construction in the arrangement of flat roofs. High density of 100-150 kg/m3 makes the material invulnerable to moisture and external sound background. Endurance to temporary or permanent vertical loads and resistance to sudden temperature changes and fire safety class NG are ideal characteristics for roofing heat and sound insulation, suitable for any region of the Russian Federation.

Ergobox septic device installation

It is quite possible to do it yourself. The finished factory design is simply installed in a prepared place and pipes are connected.

You just need to follow the following simple instructions:

First you need to inspect everything, make sure there are no malfunctions.
The pit is being dug. It is necessary to leave a distance of about 25 cm from the outer wall of the device. The depth of the pit is about two and a half meters.
The bottom needs to be level. The permissible horizontal deviation should be no more than one centimeter.
Dig a trench for the pipeline. The inlet trench should be at a slope of at least two centimeters for gravity draining.
A layer of sand from twenty to thirty centimeters is poured at the bottom of the trench.
Immerse the device directly into the pit.
Next, backfill is carried out using a mixture of cement and sand in a ratio of one to five. Falling asleep should be done in stages with tamping every twenty centimeters.
Simultaneously with the backfilling process, it is necessary to gradually fill the tanks with water, the water must be higher in level than the backfill. All containers must be filled at once in order to create equal pressure on the walls of the tank from the outside and from the inside. If there is a need for insulation from above the local station, foam plastic can be used, and it is already completely buried, leaving one hatch.

For your information: The manufacturer offers services such as “turnkey installation” or “Installation supervision”, do-it-yourself installation of a septic tank under the supervision of a master.

Modifications of Ergobox stations

The line of septic tanks with ERGOBOX aerobes is divided into five main models in terms of performance:

"ERGOBOX 3" - up to three people, 500 l / day.
"ERGOBOX 4" - up to four people, 800 l / day.
"ERGOBOX 6" - up to six people, 1300 l / day.
"ERGOBOX 8" - up to eight people, 1600 l / day.
"ERGOBOX 10" - up to ten people, 1900 l / day.

Choosing a model and installing a septic tank Ergobox

Model range of Ergobox stations

All these septic tanks consume about 1.5 kW / day of electricity. Their body dimensions in height and length are in the region of 2–2.2 meters. And the width, depending on the model, ranges from 0.785 to 1.2 m.

There is no standard, as for the size of aerated concrete blocks or bricks, here. The manufacturer selects the overall parameters of the treatment structure based on his own preferences. Moreover, depending on the air temperature, these values for the polymer case can deviate within 3%.

Each of these modifications is further subdivided into two varieties:

"S" - execution with gravity for ordinary soils;
"PR" - a subspecies with a forced release of treated effluents, used for high groundwater.

In the first case, the LOS has a pair of identical nozzles - one each at the inlet and outlet with a diameter of 110 mm. In the second variation, the outlet pipe is made with a cross section of 32 mm, and a coupling for connecting a water drainage hose is included in the septic tank kit.

Models of Ergobox treatment plants

Station	Person	LxWxH	Energy	Produces.	Price from*
Ergobox 3	1-3	1555x785x2000 mm	1.5 kW/day	500 l/day	55000 rub
Ergobox 4	4	2000x800x2000 mm	1.5 kW/day	800 l/day	59000 rub
Ergobox 6	6	2000x1000x2100 mm	1.5 kW/day	1300 l/day	69000 rub
Ergobox 8	8	2050x1050x2110 mm	1.5 kW/day	1600 l/day	82400 rub
Ergobox 10	10	2190x1200x2070 mm	1.5 kW/day	1900 l/day	99900 rub

*Prices are indicative for 2018, excluding installation

Another important parameter of the Ergobox deep cleaning station is peak discharge. Depending on the size and performance of the modification in the VOCs under consideration, it ranges from 180 to 550 liters / hour.This parameter of the septic tank characterizes the volume of wastewater that the treatment plant can accept and process without problems at a time.

The more a person lives in a cottage, the higher this value should be selected. But at the same time, if the water supply of a private house is designed for a large number of plumbing fixtures, even with one resident, the sewerage system will produce a lot

Therefore, before choosing a septic tank, it is so important to correctly calculate the exact calculation of water consumption. And then VOCs may not be able to cope with wastewater treatment

General characteristics

The manufacturer offers a video instruction on installing a cleaning station, as well as a detailed description of all the advantages of the unit.

Benefits of the Ergobox cleaning station

There are models for any type of soil;
Does not harm the environment;
Wastewater treatment up to ninety-eight percent;
Long service life up to fifty years;
Affordable price;
Energy-dependent mode of operation. This mode is convenient in case of a decrease in the number of residents;
The case is ergonomic, and the design is thought out to the smallest detail;
Immediately after installation it is ready to work. Can be installed even in areas with a high level of groundwater, the movement of the structure in the ground does not occur;
Uniform distribution of effluents over the inner surface of the tank;
Easy installation. It does not require pulling out a huge pit or the use of equipment;
The station is very easy to use. To clean the device from sludge, an ilosos is used by placing it inside;
Since the design is seamless, there are no leaks or blockages;
Does not need an additional irrigation field.

Flaws

The Ergobox septic tank has a minus, which consists in the necessary careful observance of all technologies when filling up a local cleaning system.

General information about the Ergobox septic tank

The manufacturer of the Ergobox septic tank is the Multplast company. A septic tank can be in modifications of different capacities and for a different number of residents.

Advantages

The product made in this way has a high resistance to chemicals and impact resistance. Also on the product there are no seams, scratches and any damage inherent in products made by other methods.

All models of Ergobox stations have the value of electricity consumed, on average, one and a half kilowatts per day.The length and height of the hull is from two to two point two tenths of a meter, and the width is 0.785-1.2 m. There are no specific standards, the dimensions of this design are selected by the manufacturer independently.

Modifications

The model range of Ergobox septic tanks is presented with the following capacities of 1000, 1300, 1600 and 1900 l / day.

All capacities are available in 2 modifications:

gravity septic tank with the designation S, used for ordinary soils,
forced ejection - PR, suitable for areas with a high level of groundwater penetration.

Pros and cons of Ergobox stations

For the winter, this septic tank does not need to be preserved. The incoming sewer water will not let it freeze. The bottom of the VOC is always below the freezing level of the soil, the drains inside can turn into ice only as a last resort. If the installation is done according to the rules, then it is more likely that the facade panels for the exterior decoration of the house nearby will be covered with frost than this cleaning station will freeze through.

Minus "Ergobox" has only one - the need for careful observance of the technology of backfilling VOCs in the pit. If you make a mistake here, then not for long and damage the plastic case. This is a metal tile or brick high strength. And the plastic of the walls of the station, if installed incorrectly, may well bend and crack.